Choosing uPVC Replacement Window Handles

The majority of customers agree that upvc replacement handles are easy-to-install and feel good. It is important to be aware that the handle you choose for your window should be suitable.

The key factor is the step height, which refers to the gap beneath the nose of the handle to the frame or base. Other considerations include locking mechanisms and styles.

replacement windows prices parts

There are a wide range of replacement windows prices window handles made of upvc available for purchase. They are available in a variety of styles and colors, so there is sure to be something to suit your windows. It's easy to impulse buy, particularly when the handle is damaged, so it's best to take your time and check the details prior to committing to buying a new one. First, you need to be aware of the kind of upvc handles you own and what the differences are between them. The table below lists the most common handles to help you find the right one to fit your upvc window.

Most double-glazed windows today have epag handles. They are usually fitted to the frame using two screws that screw in from above and below.

The spindle bar in the back may be of different in size, and will determine whether they are left-handed or right-handed. This is why it's essential to take a measurement of the handle you have in order to make sure you're getting the right replacement.

Usually fixed with two bolts, similar to the Espag handle, they have a low projection from the frame which means that the arm will not penetrate your blinds. This is a great choice if you want the handle to blend in with your blinds and have upvc windows.

Cockspur handles resemble Espag handles, but they have a nose that closes over a wedge which rests on the frame of the window. This kind of handle is available on older wooden and upvc windows.

On casement windows the tilt and turn handles can be operated by either turning the handle or pressing the top of window. This allows you to open the window from inside and clean it from outside without the need to climb a ladder or step across the fence. They also make a great option for people with restricted mobility and can be an excellent way to increase security and accessibility within the home.

Hints and tips

Many people will have to replace their uPVC window handles at some time. It is essential to know some tips and tricks that will make the job easier.

Check what type of handle is in your home. Depending on the type of handle and locking mechanism, it might be necessary for you to replace the lock and handle. If the roller cams and shoot bolts (espags) are blocked or seizing up, you'll have to replace them as well as the handle.

Thankfully, most uPVC handles are identical and follow industry standard size, which makes replacing them a simple process. The first step is to remove the screw covers from the handles, which are typically the pozi-drive screws. Once the screws are removed, you will be able to dismantle the handle.

If you've got the handle separated from the handle, it's a good idea to make note of how much of the spindle is protruding from the base of the handle. This will enable you to determine the length of the spindle for a replacement handle. Simply measure the length the peg is sticking from the bottom of the handle.

This is especially important for inline uPVC window glass replacement handles because they are always straight and will only open either left or right, and they won't operate in the middle. If you're not sure of the kind of handle you have in your home, it might be beneficial to get the handle from your neighbor's house and see how it operates to get an idea.

You can also determine the handiness of a uPVC window by watching how the handle spins when it is in use. Handed handles can be turned either clockwise or counter-clockwise. If you're unsure then you can always ask someone else to open the window using the handle and figure out how it operates in that way.

Find the spindle's measurement.

Selecting the right replacement window panes handle for your windows can be a bit difficult since not all handles are the same size. The spindle is the part that is the mechanism that locks the window and it is crucial that when you fit the new handle it is measured to the length of the spindle precisely to ensure that it will fit. There are a variety of types of uPVC window handles, and they operate in different ways so it is essential that you know which kind of handle you have and the type of locking system you have.

The spindle of the Espag handle is a part that extends from the rear of the handle and then into the lock gearbox that is within the window frame. When you turn the handle, it turns the lock inside the gearbox and opens the window replacements near me. They are typically used on uPVC windows with casement. They can be locked using keys for extra security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They have an "nose", which closes over a wedge-shaped striker block. They are also simple and can be locked with keys. It can be more difficult to replace these handles since they aren't as common as the handles with espagnolette.

If you have a tilt and turn uPVC window, you'll need to get a special kind of uPVC replacement handle that has a different locking mechanism. It will be able to open the window by tilting it, but also rotate it inwards and outwards to open it fully. You must ensure that the handle you select has a length at least 55mm, or it will not be able to penetrate the frame of the window.

The same method can be used to remove and replace the uPVC handle. But, you'll need to be cautious when removing it. It may be necessary to open the window wider than normal to access both screws that secure it to the frame. Once you have fitted your new uPVC handle and checked that it is in the correct position, you can tighten the screws and test the lock to make sure it works correctly.

Install the new handle

Once you have the correct replacement handle, it should simply be screwed into place. This will require a screwdriver and may be easier with an electric one. It is essential not to overtighten the screws before screwing them in. This could cause the handle or knob to swell.

The second step in fitting the new handle is to insert the spindle. The spindle is the part that runs through the handle to control the locking mechanism inside the window. It is crucial that it fits correctly as this will ensure the window is able to be shut and opened securely.

There are several different types of uPVC window handles. These include:

Espagnolette Handles are inline handles which can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are similar to inline handles but have a curved design that is useful for difficult-to-reach windows.

Tilt and turn handles - They are used on tilt and turn windows for operating the closing and opening mechanisms.

They are the most popular and the majority of uPVC windows have these in place. In the UK, they are commonly known as "Bay Windows".

It can be very frustrating when your uPVC handle breaks. There isn't any need to replace the entire uPVC windows because of a damaged handle. There are a number of simple steps that can be taken to repair and replace a damaged uPVC window handle.

Fixing your broken window handle quickly by identifying the model and measuring the spindle. It is essential to take your time and prioritise safety when working with windows or tools, however, this is a simple task. It could be the difference between a safe and secure home or a window that can be easily opened. If you have any concerns or would like to speak to a professional about replacing your window handle, contact Bridgewater Glass. We have a group of experienced and knowledgeable professionals who can assist with any issues you might be experiencing.