검색결과
-
[특집-기술위원회] TC 183 - 구리, 납, 아연, 니켈 광석 및 정광(Copper, lead, zinc and nickel ores and concentrates)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 등이 있다.ISO/TC 183 구리, 납, 아연, 니켈 광석 및 정광(Copper, lead, zinc and nickel ores and concentrates)과 관련된 기술위원회는 1983년 결성됐다. 사무국은 오스트레일리아 표준협회(Standards Australia, SA)에서 맡고 있다.위원회는 재스민 브린스미드(Ms Jasmine Brinsmead)가 책임지고 있으며 현재 의장은 마크 오드와이어(Mr Mark O'Dwyer)이며 임기는 2026년까지다. ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 샘플링, 화학적 분석 및 물리적 테스트를 포함해 구리, 납, 아연, 니켈 광석 및 정광(농축물), 제련소 잔류물 분야의 표준화다.현재 ISO/TC 183 사무국의 직접적인 책임 하에 발행된 표준은 28개며 ISO/TC 183 사무국의 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 8개국, 참관 회원은 26개국이다.□ ISO/TC 183 사무국의 직접적인 책임 하에 발행된 표준 28개 중 15개 목록▷ISO 3483:2023 Copper and zinc sulfide concentrates — Determination of thallium — Acid digestion and inductively coupled plasma-mass spectrometry▷ISO 9599:2015 Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method▷ISO 10251:2006 Copper, lead, zinc and nickel concentrates — Determination of mass loss of bulk material on drying▷ISO 10258:2018 Copper sulfide concentrates — Determination of copper content — Titrimetric methods▷ISO 10378:2016 Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method▷ISO 10469:2006 Copper sulfide concentrates — Determination of copper — Electrogravimetric method▷ISO 11441:1995 Lead sulfide concentrates — Determination of lead content — Back titration of EDTA after precipitation of lead sulfate▷ISO 11790:2017 Copper, lead, zinc and nickel concentrates — Guidelines for the inspection of mechanical sampling systems▷ISO 11794:2017 Copper, lead, zinc and nickel concentrates — Sampling of slurries▷ISO 12739:2006 Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method▷ISO 12740:1998 Lead sulfide concentrates — Determination of silver and gold contents — Fire assay and flame atomic absorption spectrometric method using scorification or cupellation▷ISO 12742:2020 Copper, lead and zinc sulfide concentrates — Determination of transportable moisture limits — Flow-table method▷ISO 12743:2021 Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content▷ISO 12744:2006 Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling▷ISO 12745:2008 Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques□ ISO/TC 183 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/CD 11456 Copper and zinc sulfide concentrates — Determination of silver content — Acid digestion and flame atomic absorption or inductively coupled plasma emission spectrometric method▷ISO/AWI 12739 Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method▷ISO/CD 12744 Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling▷ISO/CD 13548 Copper, lead and zinc sulfide concentrates — Determination of fluorine content by sodium hydroxide fusion and fluoride ion selective electrode detection
-
[특집-기술위원회] TC 156 - 금속 및 합금의 부식(Corrosion of metals and alloys)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 등도 포함된다.ISO/TC 156 금속 및 합금의 부식(Corrosion of metals and alloys)과 관련된 기술위원회는 1974년 결성됐다. 사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, Standardization Administration of the P. R. C, SAC)에서 맡고 있다.위원회는 호우 지에(Mrs Jie Hou)이 책임지고 있다. 현재 의장은 평 챠오(Mr Chao Feng)로 임기는 2025년까지다. ISO 기술 프로그램 관리자는 추 주안우(Ms Chuanyu Zou), ISO 편집 관리자는 엔 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 부식 테스트 방법, 부식 방지 방법 및 부식 제어 엔지니어링 수명주기를 포함한 금속 및 합금 부식 분야의 표준화다. ISO 내에서 이러한 분야의 활동에 대한 일반적인 조정자 역할도 수행한다.현재 ISO/TC 156 사무국과 관련해 발행된 표준은 118개며 직접적인 책임 하에 발행된 표준은 114개다. ISO/TC 156 사무국과 관련해 개발 중인 표준은 28개며 직접적인 책임하에 개발중인 표준은 26개다. 참여하고 있는 회원은 24개국, 참관 회원은 26개국이다.□ ISO/TC 156 사무국의 직접적인 책임 하에 발행된 표준 114개 중 15개 목록▷ISO 3079:2022 Two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions▷ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)▷ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid▷ISO 3651-3:2017 Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels▷ISO 4212:2023 Corrosion of metals and alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel▷ISO 4215:2022 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions▷ISO 4631:2023 Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion potential (E-CLCP) for Ti alloys fabricated via additive manufacturing method in simulated biomedical solutions▷ISO 4680:2022 Corrosion of metals and alloys — Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures▷ISO 4905:2023 Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts▷ISO 5156:2022 Corrosion of metals and alloys — Corrosion test method for disinfectant — Total immersion method▷ISO 5668:2023 Corrosion of metals and alloys — Guidelines and requirements for corrosion testing in simulated environment of deep-sea water▷ISO 6509-1:2014 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method▷ISO 6509-2:2017 Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria▷ISO 7384:1986 Corrosion tests in artificial atmosphere — General requirements▷ISO 7441:2015 Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests □ ISO/TC 156 사무국의 직접적인 책임 하에 개발 중인 표준 26개 중 15개 목록▷ISO/DIS 5929 Corrosion of Metals and Alloys — Test and evaluation method for the corrosion of steel bar embedded in concrete structure exposed to total corrosion zones in marine environments▷ISO/DIS 7054 Corrosion of metals and alloys — Wiping method for measurements of gases and particles on real structures and equipment▷ISO 7539-6:2018/DAmd 1 Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement — Amendment 1▷ISO/DIS 8044 Corrosion of metals and alloys — Vocabulary▷ISO 8407:2021/CD Amd 1 Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens — Amendment 1▷ISO/TR 8547 Corrosion of metals and alloys — Exposure test results in the Asian Monsoon region▷ISO/AWI TR 8564 Corrosion of metals and alloys — Reference data for ISO16539 Method B▷ISO 9227:2022/DAmd 1 Corrosion tests in artificial atmospheres — Salt spray tests — Amendment 1: Footnote of warning▷ISO/CD 9350 Corrosion of Metals and Alloys — Testing method for corrosion resistance for hafnium in the hightemperature and pressure▷ISO/DIS 9351 Galvanic anodes for cathodic protection in seawater and saline sediments▷ISO/DIS 9812 Corrosion of metals and alloys — Corrosion test method for disinfectant — Spray test method▷ISO 10062:2022/DAmd 1 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) — Amendment 1: Footnote of warning▷ISO/CD TR 11303 Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion▷ISO 11782-2:1998/DAmd 1 Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens — Amendment 1▷ISO/AWI 16364 Guidelines for Galvanic Corrosion Control□ ISO/TC 156 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 156/SC 1 Corrosion control engineering life cycle : 발행된 표준 4개, 개발 중인 표준 2개
-
[특집-기술위원회] TC 155 - 니켈 및 니켈 합금(Nickel and nickel alloys)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 등도 포함된다.ISO/TC 155 니켈 및 니켈 합금(Nickel and nickel alloys)과 관련된 기술위원회는 1973년 결성됐다. 사무국은 프랑스 표준화기구(Association Française de Normalization, AFNOR)에서 맡고 있다.위원회는 도니아 베니더(Mme Donia Benider)이 책임지고 있다. 현재 의장은 프레데릭 기용(M Frédéric Guillon)로 임기는 2023년까지다. ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 엔 기엣(Ms Anne Guiet) 등으로 조사됐다.업무의 범위는 용어, 사양, 샘플링과 테스트 및 분석 방법 등을 포함한 니켈 및 니켈 합금 분야의 표준화다.현재 ISO/TC 155 사무국의 직접적인 책임 하에 발행된 표준은 32개며 SO/TC 155 사무국의 직접적인 책임 하에 개발중인 표준은 1개다. 참여하고 있는 회원은 9개국, 참관 회원은 23개국이다.□ ISO/TC 155 사무국의 직접적인 책임 하에 발행된 표준 32개 중 15개 목록▷ISO/TR 4644:2021 Nickels, ferronickels and nickel alloys — Standards for the determination of chemical composition▷ISO 6283:2017 Refined nickel▷ISO 6351:1985 Nickel — Determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc contents — Flame atomic absorption spectrometric method▷ISO 6352:1985 Ferronickel — Determination of nickel content — Dimethylglyoxime gravimetric method▷ISO 6372:2017 Nickel and nickel alloys — Terms and definitions▷ISO 6501:2020 Ferronickel — Specification and delivery requirements▷ISO 7520:1985 Ferronickel — Determination of cobalt content — Flame atomic absorption spectrometric method▷ISO 7523:1985 Nickel — Determination of silver, arsenic, bismuth, cadmium, lead, antimony, selenium, tin, tellurium and thallium contents — Electrothermal atomic absorption spectrometric method▷ISO 7524:2020 Ferronickels — Determination of carbon content — Infrared absorption method after induction furnace combustion▷ISO 7526:2020 Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion▷ISO 7527:1985 Nickel, ferronickel and nickel alloys — Determination of sulfur content — Iodimetric titration method after induction furnace combustion▷ISO 7529:2017 Nickel alloys — Determination of chromium content — Potentiometric titration method with ammonium iron(II) sulfate▷ISO 7530-1:2015 Nickel alloys — Flame atomic absorption spectrometric analysis — Part 1: Determination of cobalt, chromium, copper, iron and manganese▷ISO 7530-7:1992 Nickel alloys — Flame atomic absorption spectrometric analysis — Part 7: Determination of aluminium content▷ISO 7530-8:1992 Nickel alloys — Flame atomic absorption spectrometric analysis — Part 8: Determination of silicon content□ ISO/TC 155 사무국의 직접적인 책임 하에 개발 중인 표준 1개 목록▷ISO/WD 4653 Ferronickel — Determination of carbon, sulphur, silicon, phosphorus, nickel, cobalt, chromium, and copper contents by Spark Emission Spectrometry
-
[특집-기술위원회] TC107 - 금속 및 기타 무기 코팅(Metallic and other inorganic coatings)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC1~TC67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC68 △1950년 TC74 △1951년 TC76 △1952년 TC77 △1953년 TC79, TC81 △1955년 TC82, TC83 △1956년 TC84, TC85 △1957년 TC86, TC87, TC89 △1958년 TC91, TC92 △1959년 TC94 △1960년 TC96, TC98 △1961년 TC101, TC102, TC 104등 이다.ISO/TC 107 금속 및 기타 무기 코팅(Metallic and other inorganic coatings)과 관련된 기술위원회는 TC 105, TC 106과 마찬가지로 1962년 결성됐다. 사무국은 한국국가기술표준원(Korean Agency for Technology and Standards, KATS)에서 맡고 있다.위원회는 최진혁(Dr Jinhyuk Choi)이 책임지고 있다. 현재 의장은 권식철(Dr Sik-Chol Kwon)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 ISO Editing Team 등으로 조사됐다.범위는 전기 분해, 융합, 진공 또는 화학적 수단, 기계적 증착, 이온 도금을 통해 적용되는 보호 및 장식 금속 코팅 특성의 표준화다.또한 전기 분해, 융합, 진공 또는 화학적 수단을 통해 적용되는 금속 표면의 보호 및 장식용 비금속 코팅(페인트 및 기타 유기 코팅 제외)의 특성도 포함된다.이러한 코팅에 대한 테스트 및 검사 방법의 표준화 뿐 아니라 금속 및 무기 코팅을 증착하기전 기판 준비에 관한 표준화도 포함된다.현재 ISO/TC 107 사무국과 관련해 발행된 표준은 162개며 ISO/TC 107 사무국의 직접적인 책임 하에 발행된 표준은 103개다. ISO/TC 107 사무국과 관련해 개발 중인 표준은 12개며 ISO/TC 107 사무국의 직접적인 책임 하에 개발 중인 표준은 8개다. 참여하고 있는 회원은 22명, 참관 회원은 24명이다.□ ISO/TC 107 사무국의 직접적인 책임하에 발행된 표준 103개 중 15개 목록▷ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method▷ISO 2063-1:2019 Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems▷ISO 2063-2:2017 Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems▷ISO 2064:1996 Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness▷ISO 2080:2022 Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary▷ISO 2177:2003 Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution▷ISO 2178:2016 Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method▷ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals — Measurement of coating thickness — Amplitude-sensitive eddy-current method▷ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method▷ISO 2746:2015 Vitreous and porcelain enamels — High voltage test▷ISO 2747:1998 Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock▷ISO 2819:2017 Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion▷ISO 3497:2000 Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods▷ISO 3543:2000 Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method▷ISO 3543:2000/Cor 1:2003 Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method — Technical Corrigendum 1□ ISO/TC 107 사무국의 직접적인 책임하에 개발 중인 표준 8개 목록▷ISO/FDIS 3882 Metallic and other inorganic coatings — Review of methods of measurement of thickness▷ISO 8181 Atomic layer deposition — Vocabulary▷ISO/FDIS 14919 Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification and technical supply conditions▷ISO 14920 Thermal spraying — Spraying and fusing of self-fluxing alloys▷ISO/AWI 21452 Specification and requirements of thermal spray coatings for power plant boiler tubes▷ISO/AWI 21456 Determination of the residual stress of TGO layer in thermal barrier coating by photoexcitation fluorescence piezoelectric spectroscopy▷ISO/AWI 21465 Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling▷ISO/DIS 28721-2 Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock□ ISO/TC 107 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▷ISO/TC 107/SC 3 Electrodeposited coatings and related finishes : 발행된 표준 26개, 개발 중인 표준 3개▷ISO/TC 107/SC 4 Hot dip coatings (galvanized, etc.) : 발행된 표준 6개, 개발 중인 표준 0개▷ISO/TC 107/SC 7 Corrosion tests : 발행된 표준 15개, 개발 중인 표준 0개▷ISO/TC 107/SC 8 Chemical conversion coatings : 발행된 표준 6개, 개발 중인 표준 1개▷ISO/TC 107/SC 9 Physical vapor deposition coatings : 발행된 표준 6개, 개발 중인 표준 0개
-
[특집] ISO/TC 79 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 79 경금속 및 합금(Light metals and their alloys)과 관련된 기술위원회는 1953년에 결성됐다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년에 구성된 TC77 등이다.사무국은 프랑스준화기구(Association française de normalisation, AFNOR)에서 맡고 있다. 위원회는 발렌틴 코틴(M Valentin Cottin)가 책임진다. 현재 의장은 이본 밀레(M Yvon Millet)로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 안나 (Ms Monja Korter), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다. 범위는 알루미늄, 마그네슘, 티타늄, 이들의 합금(알루미늄, 마그네슘 또는 티타늄이 주요 요소인 합금 등)의 표준화다.또한 금속 알루미늄 및 중간 알루미늄 화합물을 얻기 위해 또는 다른 산업에서 사용되는 알루미늄 광석 및 광물 등 알루미늄 광석의 표준화도 포함된다.현재 ISO/TC 79 사무국의 직접적인 책임 하에 발행된 표준은 33개다. ISO/TC 79 사무국의 공개된 표준은 111개, 개발중인 표준은 10개다. 참여하고 있는 회원은 19명, 참관 회원은 24명이다.□ ISO/TC 79 사무국의 직접 책임 하에 발행된 표준 15개 목록▲ISO 791:1973 Magnesium alloys — Determination of aluminium — 8-hydroxyquinoline gravimetric method▲ISO 792:1973 Magnesium and magnesium alloys — Determination of iron — Orthophenanthroline photometric method▲ISO 793:1973 Aluminium and aluminium alloys — Determination of iron — Orthophenanthroline photometric method▲ISO 794:1976 Magnesium and magnesium alloys — Determination of copper content — Oxalyldihydrazide photometric method▲ISO 795:1976 Aluminium and aluminium alloys — Determination of copper content — Oxalyldihydrazide photometric method▲ISO 796:1973 Aluminium alloys — Determination of copper — Electrolytic method▲ISO 797:1973 Aluminium and aluminium alloys — Determination of silicon — Gravimetric method▲ISO 808:1973 Aluminium and aluminium alloys — Determination of silicon — Spectrophotometric method with the reduced silicomolybdic complex▲ISO 809:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content between 0,01 and 0,8 %)▲ISO 810:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content less than 0,01 %)▲ISO 886:1973 Aluminium and aluminium alloys — Determination of manganese — Photometric method (Manganese content between 0,005 and 1,5 %)▲ISO 1118:1978 Aluminium and aluminium alloys — Determination of titanium — Spectrophotometric chromotropic acid method▲ISO 1178:1976 Magnesium alloys — Determination of soluble zirconium — Alizarin sulphonate photometric method▲ISO 1783:1973 Magnesium alloys — Determination of zinc — Volumetric method▲ISO 1784:1976 Aluminium alloys — Determination of zinc — EDTA titrimetric method□ ISO/TC 79 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 79/SC 2 Organic and anodic oxidation coatings on aluminium ; 발행된 표준 27개, 개발 중인 표준 0개▲ISO/TC 79/SC 4 Unalloyed (refined) aluminium ingots ; 발행된 표준 1개, 개발 중인 표준 1개▲ISO/TC 79/SC 5 Magnesium and alloys of cast or wrought magnesium ; 발행된 표준 11개, 개발 중인 표준 4개▲ISO/TC 79/SC 6 Wrought aluminium and aluminium alloys ; 발행된 표준 20개, 개발 중인 표준 1개▲ISO/TC 79/SC 7 Aluminium and cast aluminium alloys ; 발행된 표준 4개, 개발 중인 표준 0개▲ISO/TC 79/SC 9 Symbolization ; 발행된 표준 1개, 개발 중인 표준 1개▲ISO/TC 79/SC 11 Titanium ; 발행된 표준 13개, 개발 중인 표준 3개▲ISO/TC 79/SC 12 Aluminium ores ; 발행된 표준 1개, 개발 중인 표준 0개
-
식약처, 의료기기 품질·안전성 향상을 위한 기준규격 개선 추진식품의약품안전처(처장 오유경)는 국내 의료기기 품질과 안전성을 높이고 국제기준과 인허가 기준을 조화하기 위한 「의료기기 기준규격*」(식약처 고시) 개정안을 1월 18일 행정예고하고 3월 23일까지 의견을 받는다. * 의료기기 품질에 대한 기준이 필요하다고 식약처장이 인정하는 의료기기에 대해 ▲적용 범위 ▲형상 또는 구조 ▲시험규격 및 기재사항 등을 정한 것으로 허가와 기술문서 심사 시 시험규격으로 설정·사용 이번 개정안의 주요 내용은 ▲의료기기 기준규격 7종 신설 ▲기존 의료기기 기준규격 24종 개선이다. 1. 의료기기 기준규격 7종 신설 - (치과재료 2종) 충치 치료에 사용되는 ‘열가소성 의치 상용레진*’, 치아의 본을 뜨기 위한 ‘치과용 실리콘인상재**’의 기준규격 신설을 추진한다. * (resin, denture, thermoplastic) 사출, 압출 등의 방식을 통하여 열가소성 고분자로 경질의 의치상을 만드는 재료 ** (impression material, condensation silicone) 축합반응에 따라 인상 채득에 적합한 고무상 재료를 형성하는 실리콘을 주재로 하는 탄성재료 신설되는 기준규격에는 독성 등 생물학적 안전과 파괴강도 등 성능을 확보할 수 있는 시험방법·기준을 제시한다. - (기구·기계 등 5종) 암 치료 등에 사용되는 ‘고강도 집속형 초음파수술기*’, ‘유방 촬영용 엑스선장치**’ 등 5종의 기준규격 신설을 추진한다. * (High intensity focused Ultrasonic surgical system) 고강도로 집적된 초음파를 이용하여 암 등을 치료하는 기구 ** (Mammographic x-ray system, stationary, analogue) 진단을 목적으로 엑스선을 이용하여 여성의 가슴을 촬영하는 기구 전기·전자파·누설 방사선 등에 대한 환자·사용자의 안전을 확보하고, 영상 성능 등을 담보할 수 있는 시험방법·기준을 제시한다. 2. 기존 의료기기 기준규격 24종 개선 - (의료용품·치과재료 7종) 치아 우식 등에 사용하는 ‘레진계 치면열구전색재*’의 경화시간 평가 방법 등을 추가하고 ‘연고형 근관충전재**’ 시험을 위한 시험 장비를 추가로 제시하는 등 사용 환자의 안전을 확보하기 위한 개별 기준규격 개선을 추진한다. * (sealant, pit and fissure, resin) 소와열구 봉쇄에 사용하는 레진계 재료 ** (root canal filler, endodontic, paste, calcium hydroxide/zinc-oxide eugenol) 근관에 충전하는 연고상 재료로서 주로 칼슘하이드록사이드나 산화아연-유지놀 소재 - (기구·기계 17종) ‘가스마취기’, ‘운반용 보육기*’ 등이 안전사용 설정범위를 벗어날 경우 위험을 알리는 조건(경보 조건)과 사용 시 주의사항(경고 사항)을 명확히 제시하고, * (Anaesthesia system, gas) 환자에게 마취가스 등을 주입하여 마취하는 기구 ** (Incubator, infant, transportable) 이동하는 동안 신생아의 의료 환경 개선을 위해 사용하는 것으로서 견고한 박스 형태의 기구 ‘자기공명 전산화 단층 촬영장치(MRI)’, ‘전신용 전산화 단층 엑스선 촬영장치(CT)’ 사용자·환자의 방사선 노출에 대한 위험·안전 정보를 제시하는 등 국제적 수준의 안전관리를 위하여 기계·기구 17종에 대한 시험방법·기준을 개선한다. * (MRI system) 핵자기 공명 현상을 이용하여 인체를 단층 촬영하는 기구. 고정형, 이동식 또는 운반형이 있음 ** (CT system) 복수의 X선 tube와 검출기를 이용하여 서로 다른 각도에서 얻어진 동일 평면상의 자료를 재조합하여 신체의 단층면 영상을 얻는 기구 식약처는 앞으로도 국민이 성능과 안전이 확보된 고품질의 의료기기를 안심하고 사용할 수 있도록 규제과학 전문성을 바탕으로 의료기기 기준규격을 지속적으로 개선하겠다고 밝혔다.
-
[특집] ISO/TC 18 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 18 아연 및 아연합금(Zinc and zinc alloys) 관련 기술위원회 역시 TC1, TC2, TC4, TC5, TC6, TC8, TC10, TC11, TC12, TC14, TC17과 같이 1947년 구성됐다.사무국은 벨기에 국립표준기구(Bureau voor Normalisatie/Bureau de Normalisation, NBN)에서 맡고 있다. 다음 표준 개발을 위해 조직이 대기 중이다.위원회는 더크 드 무어(Mr Dirk De Moor)가 책임지고 있으며 의장은 공석이다. ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등이다.범위는 아연, 아연합금 뿐 아니라 아연합급 주물의 정의, 분류, 품질, 샘플링, 승인 테스트 등에 관한 표준화다. 현재 ISO/TC 18의 직접적인 책임 하에 발행된 표준은 10개며 참여하고 있는 회원은 14명, 참관 회원은 18명이다.□ ISO/TC 18 사무국의 직접적인 책임하에 발행된 ISO 표준 10개 목록▲ISO 301:2006 Zinc alloy ingots intended for castings▲ISO 714:1975 Zinc — Determination of iron content — Photometric method▲ISO 752:2004 Zinc ingots▲ISO 752:2004/Cor 1:2006 Zinc ingots — Technical Corrigendum 1▲ISO 1169:2006 Zinc alloys — Determination of aluminium content — Titrimetric method▲ISO 3750:2006 Zinc alloys — Determination of magnesium content — Flame atomic absorption spectrometric method▲ISO 3815-1:2005 Zinc and zinc alloys — Part 1: Analysis of solid samples by optical emission spectrometry▲ISO 3815-2:2005 Zinc and zinc alloys — Part 2: Analysis by inductively coupled plasma optical emission spectrometry▲ISO 15201:2006 Zinc and zinc alloys — Castings — Specifications▲ISO 20081:2005 Zinc and zinc alloys — Method of sampling — Specifications□ ISO/TC 18의 문서에 접근할 수 있는 위원회 목록▲ISO/TC 47 Chemistry ISO▲ISO/TC 156 Corrosion of metals and alloys ISO▲ISO/TC 164 Mechanical testing of metals ISO