검색결과
-
[특집-공동기술위원회] ⑤JTC 1/SC 6 시스템 간 통신 및 정보 교환(Telecommunications and information exchange between systems)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년에 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 202년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.공동 기술위원회(Joint Technical Committee, JTC) 산하에서 활동하고 있는 분과위원회(Subcommittee, SC) 중 SC 1, SC 2에 이어 SC 6에 대해 살펴보면 다음과 같다.ISO/IEC JTC 1/SC 6 시스템간 통신 및 정보 교환(Telecommunications and information exchange between systems)과 관련된 분과위원회는 1988년 결성됐다. 사무국은 한국 국가기술표준원(Korean Agency for Technology and Standards, KATS)에서 맡고 있다.위원회는 오정엽(Mr Jungyup OH)이 책임지고 있다. 현재 의장은 강현국(Dr Hyun Kook Kahng)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등으로 조사됐다.범위는 사용 조건 뿐 아니라 시스템 기능, 절차, 매개변수를 포함해 개방형 시스템 간의 정보 교환을 다루는 통신 분야 표준화 작업을 진행해 왔다.이 표준화는 물리적, 데이터 링크, 네트워크 및 전송을 포함한 하위 계층의 프로토콜과 서비스뿐만 아니라 디렉토리 및 ASN.1(MFAN, NFC, PLC, 미래 네트워크 및 OID)을 포함하되 이에 국한되지 않는 상위 계층의 프로토콜 및 서비스를 포함하고 있다.현재 ISO/IEC JTC 1/SC 6 사무국의 직접적인 책임 하에 발행된 표준은 397개며 개발 중인 표준은 18개다. 참여하고 있는 회원은 19명, 참관 회원은 36명이다.□ ISO/IEC JTC 1/SC 6 사무국의 직접적인 책임하에 발행된 표준 및(또는) 프로젝트 397개 중 15개 목록▷ISO 1155:1978 Information processing — Use of longitudinal parity to detect errors in information messages▷ISO 1177:1985 Information processing — Character structure for start/stop and synchronous character oriented transmission▷ISO 1745:1975 Information processing — Basic mode control procedures for data communication systems▷ISO 2110:1989 Information technology — Data communication — 25-pole DTE/DCE interface connector and contact number assignments▷ISO 2110:1989/Amd 1:1991 Information technology — Data communication — 25-pole DTE/DCE interface connector and contact number assignments — Amendment 1: Interface connector and contact number assignments for a DTE/DCE interface for data signalling rates above 20 000 bit/s per second▷ISO/IEC 2593:2000 Information technology — Telecommunications and information exchange between systems — 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments▷ISO 2628:1973 Basic mode control procedures — Complements▷ISO 2629:1973 Basic mode control procedures — Conversational information message transfer▷ISO/IEC 4005-1:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 1: Communication model and requirements▷ISO/IEC 4005-2:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 2: Physical and data link protocols for shared communication▷ISO/IEC 4005-3:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 3: Physical and data link protocols for control communication▷ISO/IEC 4005-4:2023 Telecommunications and information exchange between systems — Unmanned aircraft area network (UAAN) — Part 4: Physical and data link protocols for video communication▷ISO 4902:1989 Information technology — Data communication — 37-pole DTE/DCE interface connector and contact number assignments▷ISO 4903:1989 Information technology — Data communication — 15-pole DTE/DCE interface connector and contact number assignments▷ISO/IEC 5021-1:2023 Telecommunications and information exchange between systems — Wireless LAN access control — Part 1: Networking architecture▷ISO/IEC 5021-2:2023 Telecommunications and information exchange between systems — Wireless LAN access control — Part 2: Dispatching platform□ ISO/IEC JTC 1/SC 6 사무국의 직접적인 책임하에 개발중인 표준 및(또는) 프로젝트 18개 중 15개 목록▷ISO/IEC PRF 4396-1 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 1: Reference model▷ISO/IEC PRF 4396-2 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 2: Common application connection establishment protocol▷ISO/IEC PRF 4396-3 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 3: Common distributed application protocol▷ISO/IEC PRF 4396-4 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 4: Complete enrolment procedures▷ISO/IEC PRF 4396-5 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 5: Incremental enrolment procedures▷ISO/IEC PRF 4396-6 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 6: RINA data transfer service▷ISO/IEC PRF 4396-7 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 7: Flow allocator▷ISO/IEC PRF 4396-8 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 8: RINA general delimiting procedures▷ISO/IEC PRF 4396-9 Telecommunications and information exchange between systems — Recursive inter-network architecture — Part 9: Error and flow control protocol▷ISO/IEC/IEEE DIS 8802-1Q Telecommunications and exchange between information technology systems — Requirements for local and metropolitan area networks — Part 1Q: Bridges and bridged networks▷ISO/IEC 9594-8:2020/CD Cor 2 Information technology — Open systems interconnection — Part 8: The Directory: Public-key and attribute certificate frameworks — Technical Corrigendum 2▷ISO/IEC 9594-11:2020/CD Cor 1 Information technology — Open systems interconnection directory — Part 11: Protocol specifications for secure operations — Technical Corrigendum 1▷ISO/IEC 9594-11:2020/DAmd 1 Information technology — Open systems interconnection directory — Part 11: Protocol specifications for secure operations — Amendment 1▷ISO/IEC DIS 9594-12 Information technology — Open systems interconnection — Part 12: The Directory: Key management and public-key infrastructure establishment and maintenance▷ISO/IEC FDIS 18092 Telecommunications and information exchange between systems — Near Field Communication Interface and Protocol 1 (NFCIP-1)
-
[특집-공동기술위원회] ④JTC 1/SC 2 코드화된 문자 세트(Coded character sets)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년에 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 202년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.공동 기술위원회(Joint Technical Committee, JTC) 산하에서 활동하고 있는 분과위원회(Subcommittee, SC) 중 첫 번째 SC 1 활동에 이어 SC 2에 대해 살펴보면 다음과 같다.ISO/IEC JTC 1/SC 2 코드화된 문자 세트(Coded character sets)와 관련된 분과위원회는 1987년 결성됐다. 사무국은 일본산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 나가사와 아유코(Ms Ayuko Nagasawa)가 책임지고 있다. 현재 의장은 마사루 타케치(Mr Masaru Takechi)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등으로 조사됐다.범위는 문자열 순서, 관련 제어 기능, 정보 교환을 위한 코드화된 표현 및 코드 확장 기술을 포함해 그래픽 문자 집합 및 특성의 표준화다. 단, 오디오 및 사진 코딩은 제외된다.현재 ISO/IEC JTC 1/SC 2 사무국의 직접적인 책임하에 발행된 표준은 49개며 개발 중인 표준은 3개다. 참여하고 있는 회원은 24명, 참관 회원은 26명이다.□ ISO/IEC JTC 1/SC 2 사무국의 직접적인 책임하에 발행된 표준 및(또는) 프로젝트 49개 중 15개 목록▷ISO/IEC 646:1991 Information technology — ISO 7-bit coded character set for information interchange▷ISO 962:1974 Information processing — Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 12,7 mm (0.5 in) magnetic tape▷ISO 1113:1979 Information processing — Representation of the 7- bit coded character set on punched tape▷ISO 1154:1975 Information processing — Punched paper tape — Dimensions and location of feed holes and code holes▷ISO 1681:1973 Information processing — Unpunched paper cards — Specification▷ISO/IEC 2022:1994/Cor 1:1999 Information technology — Character code structure and extension techniques — Technical Corrigendum 1▷ISO/IEC 2022:1994 Information technology — Character code structure and extension techniques▷ISO 2033:1983 Information processing — Coding of machine readable characters (MICR and OCR)▷ISO 2047:1975 Information processing — Graphical representations for the control characters of the 7- bit coded character set▷ISO/IEC 2375:2003 Information technology — Procedure for registration of escape sequences and coded character sets▷ISO 3275:1974 Information processing — Implementation of the 7- bit coded character set and its 7- bit and 8- bit extensions on 3,81 mm magnetic cassette for data interchange▷ISO/IEC 4873:1991 Information technology — ISO 8-bit code for information interchange — Structure and rules for implementation▷ISO 5426-2:1996 Information and documentation — Extension of the Latin alphabet coded character set for bibliographic information interchange — Part 2: Latin characters used in minor European languages and obsolete typograph▷ISO 5426:1983 Extension of the Latin alphabet coded character set for bibliographic information interchange▷ISO 5427:1984 Extension of the Cyrillic alphabet coded character set for bibliographic information interchange□ ISO/IEC JTC 1/SC 2 사무국의 직접적인 책임하에 개발중인 표준 및(또는) 프로젝트 3개 목록▷ISO/IEC CD TR 2375 Information technology – Registered escape sequences and coded character sets▷ISO/IEC 10646:2020/CD Amd 2.3 Information technology — Universal coded character set (UCS) — Amendment 2: Todhri, Garay, Tulu-Tigalari, Sunuwar, Gurung Khema, Kirat Rai, and other characters▷ISO/IEC CD 14651 Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering
-
[특집-기술위원회] TC 115 - 펌프(Pumps)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111 등이다.ISO/TC 115 폄프(Pumps)와 관련된 기술위원회는 TC 112, TC 113, TC 114와 마찬가지로 1964년 결성됐다. 사무국은 프랑스 표준화 협회(Association Française de Normalisation, AFNOR)에서 맡고 있다.위원회는 산드라 에블린 브리토(Mlle Sandra Evelyne Brito)가 책임지고 있다. 현재 의장은 줄리앙 샬레(Mr Julien Chalet)으로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 빈센조 바주치(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 치수 및 기술 사양을 포함한 펌프 분야의 표준화다. 또한 완전한 펌핑 설치를 포함해 모든 액체에 대한 회전 역학 및 용적형 펌프에 대한 테스트 방법 및 승인 조건, 설치, 특수 용도 뿐 아니라 폐수용 회전식 혼합기 등도 표준화에 포함된다.현재 ISO/TC 115와 관련해 발행된 표준은 24개며 TC 115 사무국의 직접적인 책임 하에 발행된 표준은 5개다. 참여하고 있는 회원은 18명, 참관 회원은 24명이다.□ ISO/TC 115 사무국의 직접적인 책임 하에 발행된 표준 5개 목록▷ISO 3661:1977 End-suction centrifugal pumps — Baseplate and installation dimensions▷ISO/ASME 14414:2019 Pump system energy assessment▷ISO 17769-1:2012 Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 1: Liquid pumps▷ISO 17769-2:2012 Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 2: Pumping system▷ISO 20361:2019 Liquid pumps and pumps units — Noise test code — Grades 2 and 3 of accuracy□ ISO/TC 115 사무국의 소위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 115/SC 1 Dimensions and technical specifications of pumps ; 발행된 표준 12개, 개발 중인 표준 0개▷ISO/TC 115/SC 2 Methods of measurement and testing ; 발행된 표준 4개, 개발 중인 표준 0개▷ISO/TC 115/SC 3 Installation and special application ; 발행된 표준 3개, 개발 중인 표준 1개
-
[특집-공동기술위원회] ①JTC 1, 정보 기술(Information technology)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다. 기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만명의 전문가에게 글로벌, 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 202년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임하에 개발 중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.□ ISO/IEC JTC 1 사무국의 직접적인 책임 하에 발행된 표준 517개 중 15개 목록▷ISO 1538:1984 Programming languages — ALGOL 60▷ISO 1730:1980 Dictation equipment — Basic operating requirements▷ISO 1858:1977 Information processing — General purpose hubs and reels, with 76 mm (3 in) centrehole, for magnetic tape used in interchange instrumentation applications▷ISO 1859:1973 Information processing — Unrecorded magnetic tapes for interchange instrumentation applications — General dimensional requirements▷ISO 1860:1986 Information processing — Precision reels for magnetic tape used in interchange instrumentation applications▷ISO 2257:1980 Office machines and printing machines used for information processing — Widths of fabric printing ribbons on spools▷ISO 2258:1976 Printing ribbons — Minimum markings to appear on containers▷ISO/IEC 2382:2015 Information technology — Vocabulary▷ISO 2775:1977 Office machines and printing machines used for information processing — Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons▷ISO 2784:1974 Continuous forms used for information processing — Sizes and sprocket feed holes▷ISO/IEC 3532-1:2023 Information technology — Medical image-based modelling for 3D printing — Part 1: General requirements▷ISO 3540:1976 Paper or plastic printing ribbons — Characteristics of cores▷ISO 3791:1976 Office machines and data processing equipment — Keyboard layouts for numeric applications▷ISO 3792:1976 Adding machines — Layout of function keyboard▷ISO 3802:1976 Information processing — General purpose reels with 8 mm (5/16 in) centre hole for magnetic tape for interchange instrumentation applications□ ISO/IEC JTC 1 사무국의 직접적인 책임 하에 개발중인 표준 23개 중 15개 목록▷ISO/IEC FDIS 3532-2 Information technology — Medical image-based modelling for 3D printing — Part 2: Segmentation▷ISO/IEC DIS 4879 Information technology — Quantum computing — Terminology and vocabulary▷ISO/IEC DIS 5087-2 Information technology — City data model — Part 2: City level concepts▷ISO/IEC DIS 5153-1 Information Technology — City service platform for public health emergencies — Part 1: Overview and general requirements▷ISO/IEC AWI 8801 Information Technology — 3D Printing and Scanning-- 3D scanned and labeled data Standard Operating Procedure (SOP) for evaluation of modelling from 3D scanned data▷ISO/IEC AWI 8803 Information Technology — 3D Printing and Scanning — accuracy and precision evaluation process for modeling from 3D scanned data▷ISO/IEC DIS 14776-346 Information technology — Small computer system interface (SCSI) — Part 346: Zoned Block Commands - 2 (ZBC-2)▷ISO/IEC AWI 16466 Information Technology — 3D Printing and scanning — Assessment methods of 3D scanned data for 3D printing model▷ISO/IEC DIS 17760-105 Information technology — ATA Command Set - 5 (ACS-5) — Part 105: Title missing▷ISO/IEC DIS 17917 Smart cities — Guidance to establishing a decision-making framework for sharing data and information services▷ISO/IEC AWI TR 18157 Information technology — Introduction to quantum computing▷ISO/IEC PRF 18974 Information technology — OpenChain security assurance specificationISO/IEC DIS 19987 Information technology — EPC Information Services (EPCIS)▷ISO/IEC DIS 19988 Information technology — Core Business Vocabulary (CBV)▷ISO/IEC AWI TR 20169 Information technology — Overview of smart city standardization
-
[특집-공동기술위원회] JTC 1/SC 17, 카드 및 개인 식별을 위한 보안 장치(Cards and security devices for personal identification)ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안 장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당한다.2023년 9월27일(수요일) 싱가포르에서 개최되는 ISO/IEC JTC 1 SC17 총회를 위한 ISO/TC 307을 살펴보면 다음과 같다.ISO/TC 307은 블록체인 및 분산원장 기술(Blockchain and Distributed Ledger Technologies(DLT))에 관한 기술위원회다. TC 307은 블록체인 및 DLT 분야에서 증가하는 표준화 요구를 충족하고 더 큰 혁신, 향상된 거버넌스 및 지속 가능한 개발을 통해 기술의 광범위한 채택을 장려하는 것으로 목적으로 한다.이를 위해 보안, 개인 정보 보호, 확장성 및 상호 운용성을 개선하기 위해 국제적으로 합의된 작업 방법을 제공하고 있다.■ ISO/TC 307이 공개한 문서는 아래 목록과 같다.(IS=International Standard, TS=Technical Specifications, TR=Technical Report를 의미한다.▷ISO/TR 3242:2022 사용 사례(Use cases)▷ISO/TR 6039:2023 블록체인 시스템 설계를 위한 주체 및 객체 식별자(Identifiers of subjects and objects for the design of blockchain systems)▷ISO 22739:2020 어휘(Vocabulary)▷ISO/TR 23244:2020 개인정보 보호 및 개인 식별 정보 보호 고려사항(Privacy and personally identifiable information protection considerations)▷ISO/TR 23249:2022 ID 관리를 위한 기존 DLT 시스템 개요(Overview of existing DLT systems for identity management)▷ISO 23257:2022 참조 아키텍처(Reference architecture)▷ISO/TS 23258:2021 분류 및 온톨로지(Taxonomy and Ontology)▷ISO/TR 23455:2019 블록체인의 스마트 계약과 분산 원장 기술 시스템 간의 상호 작용 개요 및 상호 작용(Overview of and interactions between smart contracts in blockchain and distributed ledger technology systems)▷ISO/TR 23576:2020 디지털 자산 관리인의 보안 관리(Security management of digital asset custodians)▷ISO/TS 23635:2022 거버넌스 지침(Guidelines for governance)▷ISO/TR 23644:2023 DLT 기반 ID 관리를 위한 트러스트 앵커 개요(Overview of trust anchors for DLT-based identity management)■ ISO/TC 307이 진행 중인 작업▷ISO/DTR 6277 블록체인 및 분산 원장 기술 — 블록체인 및 DLT 사용 사례를 위한 데이터 흐름 모델▷ISO/AWI 20435 대체 불가능한 토큰(NFT)을 사용한 물리적 자산 표현(Representing Physical Assets using Non-Fungible Tokens)▷ISO/FDIS 22739 블록체인 및 분산 원장 기술 - 어휘(2020 버전 개정)▷ISO/AWI TS 23516 블록체인 및 분산 원장 기술 - 상호 운용성 프레임워크▷ISO/WD TR 23642 블록체인 및 분산 원장 기술 - 스마트 계약 보안 우수 사례 및 문제 개요▷PWIs(Preliminary Work Item, 예비 업무 항목=예비단계)○ ISO/PWI 23095 분산 원장 서비스를 위한 27002(27002 for distributed ledger services)○ ISO/PWI 12833 블록체인 및 분산 원장 기술의 재식별 및 개인 정보 보호 취약점과 완화 방법(Re-identification and privacy vulnerabilities and mitigation methods in blockchain and distributed ledger technologies)○ ISO/PWI 23042 분산형 신원(Decentralized Identity)ISO/TC 307과 관련된 다음 총회는 캐나다 몬트리올에서 2023년 10월30일~1월3일까지 개최될 예정이다. SC17는 다양한 의견을 수렴하기 위해 노력 중이다.
-
[기획-디지털 ID 표준] ⑦국제 표준화 기구(SDO) 및 표준 2 - ISO 산하 디지털 ID 관련 실무그룹디지털 ID(Digital Identity) 분야에서 상호운용(interoperable)이 가능하고 안전한 서비스 보장을 위한 표준에 대한 수요가 증가하고 있다. 다양한 표준 조직 및 산업 기관이 활동하는 이유다.디지털 ID 표준을 개발하는 곳은 유럽표준화기구(European Standardisation Organistions), 국제표준화기구(International Standardisation Organisation, SDOs), 상업 포럼 및 컨소시엄, 국가기관 등 다양하다.국제표준(international standard, IS)은 많은 국가 전문가들의 합의에 의해 개발된 문서다. 이렇게 개발된 문서는 전 세계적으로 공인된 국제표준화기구(International Standardisation Organisations, SDOs) 중 하나에 의해 승인 및 발행된다. 전 세계적으로 공인된 국제표준화기구(SDOs)는 세계표준화기구(International Organization for Standardization, ISO), 국제전기기술위원회(International Electrotechnical Commission, IEC), 국제전기통신연합(International Telecommunications Union, ITU)등이 있다.이중 대부분의 국제 디지털 ID와 관련된 활동은 ISO/IEC JTC1, 정보보안(Information Security) 내에서 이뤄지고 있다.관련 관련 분과위원회인 △ISO/IEC JTC1/SC 6 △ISO/IEC JTC1/SC 17 △ISO/IEC JTC1/SC 27 △ISO/IEC JTC1/SC 31 및 연구범위 내에 있는 ISO TC 307에 대해 자세히 알아보면 다음과 같다.ISO/IEC JTC1/SC 6, 시스템 간 통신 및 정보교환(Telecommunications and information exchange between systems)과 관련된 실무그룹(Working Group, WG)는 자문그룹(AG) 4개, WG 3개 등이다.▷ISO/IEC JTC 1/SC 6/AG 1 Wearable devices▷ISO/IEC JTC 1/SC 6/AG 2 Concepts and terminology▷ISO/IEC JTC 1/SC 6/AG 3 Systematic review process▷ISO/IEC JTC 1/SC 6/AG 4 MCS innovation▷ISO/IEC JTC 1/SC 6/WG 1 Physical and data link layers▷ISO/IEC JTC 1/SC 6/WG 7 Network, transport and future network▷ISO/IEC JTC 1/SC 6/WG 10 Directory, ASN.1 and RegistrationISO/IEC JTC1/SC 17, 개인식별을 위한 카드 및 보안장치(Cards and security devices for personal identification)과 관련된 실무그룹은 자문그룹 2개, 의장 자문그룹(CAG)1개, 워킹그룹(WG) 7개다.▷ISO/IEC JTC 1/SC 17/AG 1 Registration Management Group (RMG)▷ISO/IEC JTC 1/SC 17/AG 3 Digital wallets▷ISO/IEC JTC 1/SC 17/CAG 1 Chair's Advisory Group▷ISO/IEC JTC 1/SC 17/WG 1 Physical characteristics and test methods for ID-cards▷ISO/IEC JTC 1/SC 17/WG 3 Traveller identification▷ISO/IEC JTC 1/SC 17/WG 4 Generic interfaces and protocols for security devices▷ISO/IEC JTC 1/SC 17/WG 8 Integrated circuit cards without contacts▷ISO/IEC JTC 1/SC 17/WG 10 Motor vehicle driver licence and related documents▷ISO/IEC JTC 1/SC 17/WG 11 Application of biometrics to cards and personal identification▷ISO/IEC JTC 1/SC 17/WG 12 UAS License and Drone/UAS Security ModuleISO/IEC JTC1/SC 27, 정보 보안, 사이버 보안 및 개인정보 보호(Information security, cybersecurity and privacy protection)와 관련된 실무그룹은 자문그룹 5개, 특별그룹(Ad-hoc group, AHG) 3개, 의장 자문그룹(CAG) 1개, 공동작업반(JWG) 1개, 워킹그룹(WG) 5개 등이다.▷ISO/IEC JTC 1/SC 27/AG 2 Trustworthiness Working group▷ISO/IEC JTC 1/SC 27/AG 5 Strategy Working group▷ISO/IEC JTC 1/SC 27/AG 6 Operations Working group▷ISO/IEC JTC 1/SC 27/AG 7 Communication and Outreach (AG-CO) Working group▷ISO/IEC JTC 1/SC 27/AG 8 Advisory Group on Conformity Assessment Working group▷ISO/IEC JTC 1/SC 27/AHG 1 Resolution Drafting Working group▷ISO/IEC JTC 1/SC 27/AHG 2 Security and privacy in IoT and Digital Twin Working group▷ISO/IEC JTC 1/SC 27/AHG 3 Security and privacy in AI and Big Data (BD) Working group▷ISO/IEC JTC 1/SC 27/CAG Chair’s Advisory Group Working group▷ISO/IEC JTC 1/SC 27/JWG 6 Joint ISO/IEC JTC1/SC 27 - ISO/TC 22/SC 32 WG : Cybersecurity requirements and evaluation activities for connected vehicle devices Working group▷ISO/IEC JTC 1/SC 27/WG 1 Information security management systems Working group▷ISO/IEC JTC 1/SC 27/WG 2 Cryptography and security mechanisms Working group▷ISO/IEC JTC 1/SC 27/WG 3 Security evaluation, testing and specification Working group▷ISO/IEC JTC 1/SC 27/WG 4 Security controls and services Working group▷ISO/IEC JTC 1/SC 27/WG 5 Identity management and privacy technologies Working groupISO/IEC JTC1/SC 31, 자동 식별 및 데이터 캡처 기술(Automatic identification and data capture techniques)과 관련된 실무그룹은 워킹그룹 4개가 있다.▷ISO/IEC JTC 1/SC 31/WG 1 Data carrier Working group▷ISO/IEC JTC 1/SC 31/WG 2 Data and structure Working group▷ISO/IEC JTC 1/SC 31/WG 4 Radio communications Working group▷ISO/IEC JTC 1/SC 31/WG 8 Application of AIDC standards Working groupISO TC 307(ISO Technical Committee 307)은 블록체인 기술 및 분산 원장 기술(Blockchain and distributed ledger technologies) 관련 실무그룹은 자문그룹(AG) 3개, 특별그룹(Ad-hoc group, AHG) 1개, 의장 자문그룹(CAG) 1개, 공동작업반(JWG) 1개, 워킹그룹(WG) 6개 등으로 구성돼 있다.▷ISO/TC 307/AG 1 SBP Review Advisory Group▷ISO/TC 307/AG 2 Liaison Advisory Group▷ISO/TC 307/AG 3 Digital currencies▷ISO/TC 307/AHG 4 DLT and carbon markets▷ISO/TC 307/CAG 1 Convenors coordination group▷ISO/TC 307/JWG 4 Joint ISO/TC 307 - ISO/IEC JTC 1/SC 27 WG: Security, privacy and identity for Blockchain and DLT▷ISO/TC 307/WG 1 Foundations▷ISO/TC 307/WG 3 Smart contracts and their applications▷ISO/TC 307/WG 5 Governance▷ISO/TC 307/WG 6 Use cases▷ISO/TC 307/WG 7 Interoperability▷ISO/TC 307/WG 8 Non-Fungible Tokens이외에도 다른 위원회 책임 하에 있는 공동 실무그룹은 ISO/TC 46/SC 11/JWG 1Joint ISO/TC 46/SC 11 - ISO/TC 307 WG: Blockchain이다.
-
[기획-디지털 ID 표준] ④유럽표준화기구(ESOs) 및 표준 - 산출물 소개디지털 ID(Digital Identity) 분야에서 상호운용(interoperable)이 가능하고 안전한 서비스 보장을 위한 표준에 대한 수요가 증가하고 있다. 다양한 표준 조직 및 산업 기관이 활동하는 이유다.디지털 ID 표준을 개발하는 곳은 유럽표준화기구(European Standardisation Organistions), 국제표준화기구(International Standardisation Organisations), 상업 포럼 및 컨소시엄, 국가기관 등 다양하다.유럽 표준화 기구(ESOs)의 산출물은 △CEN/CENELEC 워크샵 계약(CEN/CENELEC Workshop Agreements, CWAs) △ETSI 표준(ETSI Standards, ETSI ES) 및 ETSI 지침(ETSI Guides, ETSI EG) △ETSI 기술 사양(ETSI Technical Specifications, ETSI TSs) 및 ETSI 기술 보고서(ETSI Technical Reports, ETSI TRs) 등이다.먼저 CEN/CENELEC 워크샵 계약(CEN/CENELEC Workshop Agreements, CWAs)는 워크숍을 통해 개발된 CEN/CENELEC 계약이다. 해당 내용에 책임이 있는 식별된 개인 및 조직의 합의를 반영한다.CWAs는 유럽 표준의 지위를 갖고 있지 않다. 따라서 CEN/CENELEC에 소속된 국가 회원은 CWAs와 충돌 시 국가표준을 철회할 의무를 부담하지 않는다.다음으로 ETSI 표준(ETSI Standards, ETSI ES) 및 ETSI 지침(ETSI Guides, ETSI EG)은 ETSI 멤버십에 따라 가중치를 부여한 투표 후 채택된 ETSI 결과물이다.마지막으로 ETSI 기술 사양(ETSI Technical Specifications, ETSI TSs), ETSI 기술보고서(ETSI Technical Reports, ETSI TRs)는 담당 기술기관이 채택한 것이다.
-
[특집-기술위원회] TC 112 - 진공 기술(Vacuum technology)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC1~TC67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC68 △1950년 TC74 △1951년 TC76 △1952년 TC77 △1953년 TC79, TC81 △1955년 TC82, TC83 △1956년 TC84, TC85 △1957년 TC86, TC87, TC89 △1958년 TC91, TC92 △1959년 TC94 △1960년 TC96, TC98 △1961년 TC101, TC102, TC 104, △1962년 TC105~TC107, △1963년 TC108~TC111 등이다.ISO/TC 112 진공기술(Vacuum technology)과 관련된 기술위원회는 1964년 결성됐다. 사무국은 독일표준화협회(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 위르겐 아이젠라이히(Mr Jürgen Eisenreich)가 책임지고 있다. 현재 의장은 하이너 쾨스터스(Mr Dr Heiner Kösters)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등으로 조사됐다.범위는 장치 분야(필수 특성, 치수 및 재료)와 측정의 정의 및 방법 분야에의 진공 기술 표준화다. 현재 ISO/TC 112와 관련해 발행된 표준은 26개다. ISO/TC 112와 관련해 개발중인 표준은 7개다. 참여하고 있는 회원은 12명, 참관 회원은 17명이다.□ ISO/TC 112 사무국의 직접적인 책임 하에 발행된 표준 26개 중 15개 목록▷ISO 1608-1:1993 Vapour vacuum pumps — Measurement of performance characteristics — Part 1: Measurement of volume rate of flow (pumping speed)▷ISO 1608-2:1989 Vapour vacuum pumps — Measurement of performance characteristics — Part 2: Measurement of critical backing pressure▷ISO 1609:2020 Vacuum technology — Dimensions of non-knife edge flanges▷ISO 2861:2020 Vacuum technology — Dimensions of clamped-type quick-release couplings▷ISO 3529-1:2019 Vacuum technology — Vocabulary — Part 1: General terms▷ISO 3529-2:2020 Vacuum technology — Vocabulary — Part 2: Vacuum pumps and related terms▷ISO 3529-3:2014 Vacuum technology — Vocabulary — Part 3: Total and partial pressure vacuum gauges▷ISO 3567:2011 Vacuum gauges — Calibration by direct comparison with a reference gauge▷ISO 3669:2020 Vacuum technology — Dimensions of knife-edge flanges▷ISO 9803-1:2020 Vacuum technology — Mounting dimensions of pipeline fittings — Part 1: Non knife-edge flange type▷ISO 9803-2:2020 Vacuum technology — Mounting dimensions of pipeline fittings — Part 2: Knife-edge flange type▷ISO 14291:2012 Vacuum gauges — Definitions and specifications for quadrupole mass spectrometers▷ISO 19685:2017 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for Pirani gauges▷ISO 20146:2019 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges▷ISO/TS 20175:2018 Vacuum technology — Vacuum gauges — Characterization of quadrupole mass spectrometers for partial pressure measurement□ ISO/TC 112 사무국의 직접적인 책임 하에 개발 중인 표준 7개 목록▷ISO/AWI 27893 Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge▷ISO/AWI 24477 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for spinning rotor gauges▷ISO/FDIS 21360-6 Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 6: Cryo vacuum pumps▷ISO 21360-5 Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 5: Non-evaporable getter (NEG) vacuum pumps▷ISO/TS 6737 Vacuum technology — Vacuum gauges — Characteristics for a stable ionisation vacuum gauge▷ISO/AWI 3669 Vacuum technology — Dimensions of knife-edge flanges▷ISO/AWI 3567 Vacuum gauges — Calibration by direct comparison with a reference gauge
-
[오스트레일리아] 정부, 9월 6일부터 아동 성적 학대 관련 최소 실천 표준오스트레일리아 정부에 따르면 9월 6일부터 아동 성적 학대에 대한 전문가 및 지역사회 지원 서비스 최소 실행 표준을 도입했다.최소 실천 표준(Minimum Practice Standards) : 아동 성적 학대에 대한 전문가 및 지역 사회 지원 서비스 대응(Specialist and Community Support Services Responding to Child Sexual Abuse)은 아동 성적 학대 예방 및 대응을 위한 국가 전략 2021-2030에 따른 핵심 조치다.정부는 프로젝트를 지원하기 위해 시간을 내어 준 개인 및 조직을 포함해 사우스 오스트레일리아 대학의 오스트레일리아 아동 보호 센터(Australian Centre for Child Protection) 프로젝트팀과 표준 개발에 기여한 모든 사람에게 감사를 표명했다.오스트레일리아는 전국아동보호주간(National Child Protection Week)을 운영하고 있다. 전국아동보호주간의 가장 중요한 메시지는 '모든 지역사회의 모든 어린이에게 공정한 대우가 필요하다'이다.아동보호주간을 운영하는 근본적인 목적은 아동 성적 학대 영향을 받는 모든 어린이와 성인이 오스트레일리아 어디에 있든 적절한 지원을 받도록 보장하는 것이다.
-
[특집-기술위원회] TC108 - 기계적 진동, 충격 및 상태 모니터링(Mechanical vibration, shock and condition monitoring)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC1~TC67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC68 △1950년 TC74 △1951년 TC76 △1952년 TC77 △1953년 TC79, TC81 △1955년 TC82, TC83 △1956년 TC84, TC85 △1957년 TC86, TC87, TC89 △1958년 TC91, TC92 △1959년 TC94 △1960년 TC96, TC98 △1961년 TC101, TC102, TC 104, △1962년 TC105~TC107 등이다.ISO/TC 108 기계적 진동, 충격 및 상태 모니터링(Mechanical vibration, shock and condition monitoring)과 관련된 기술위원회는 1963년 결성됐다. 사무국은 미국 국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 낸시 블레어 드레온(Ms Nancy Blair-DeLeon)이 책임지고 있다. 현재 의장은 브레인 비비(Mr Brian Biby)로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 타마호 타카이(Ms Tamaho Takai), ISO 편집 관리자는 빈센조 바추키(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 다학문적 접근 방식을 사용해 인간, 기계, 차량(항공, 바다, 육상, 철도) 및 고정 구조물에 관한 진동 및 충격의 효과와 기계 및 구조물의 상태 모니터링의 효과, 기계적 진동 및 충격 분야의 표준화다. 현재 관심이 있는 특정 영역에는 다음의 표준화가 포함된다,▶기계적 진동, 기계적 충격 및 상태 모니터링 분야의 용어 및 명칭▶진동 및 충격의 측정·분석·평가(예, 신호 처리 방법, 구조 역학 분석 방법, 변환기 및 진동 발생기 교정 방법 등)▶진동 및 충격에 대한 능동 및 수동 제어 방법(예, 기계·격리·감쇠의 균형)▶인간, 기계, 차량(항공, 해상, 육상, 철도), 고정 구조물 및 민감한 장비에 대한 진동 및 충격의 영향 평가▶진동 및 충격 측정 기구(예, 변환기, 진동 발생기, 신호 조절기, 신호 분석 계측기, 신호 수집 시스템)▶기계의 상태 모니터링에 필요한 모든 측정 변수를 사용하는 측정 방법, 계측, 데이터 수집, 처리, 프리젠테이션, 분석, 진단 및 예측▶관련 분야의 인력 교육 및 인증 등이다.현재 ISO/TC 108 사무국과 관련해 발행된 표준은 195개며 ISO/TC 108 사무국의 직접적인 책임 하에 발행된 표준은 64개다. ISO/TC 108 사무국과 관련해 개발 중인 표준은 18개며 ISO/TC 108 사무국의 직접적인 책임하에 개발 중인 표준은 3개다. 참여하고 있는 회원은 23명, 참관 회원은 26명이다.□ ISO/TC 108 사무국의 직접적인 책임 하에 발행된 표준 64개 중 15개 목록▷ISO 2017-1:2005 Mechanical vibration and shock — Resilient mounting systems — Part 1: Technical information to be exchanged for the application of isolation systems▷ISO 2017-2:2007 Mechanical vibration and shock — Resilient mounting systems — Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems▷ISO 2017-3:2015 Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings▷ISO 2041:2018 Mechanical vibration, shock and condition monitoring — Vocabulary▷ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity▷ISO 5347-8:1993 Methods for the calibration of vibration and shock pick-ups — Part 8: Primary calibration by dual centrifuge▷ISO 5347-12:1993 Methods for the calibration of vibration and shock pick-ups — Part 12: Testing of transverse shock sensitivity▷ISO 5347-13:1993 Methods for the calibration of vibration and shock pick-ups — Part 13: Testing of base strain sensitivity▷ISO 5347-15:1993 Methods for the calibration of vibration and shock pick-ups — Part 15: Testing of acoustic sensitivity▷ISO 5347-16:1993 Methods for the calibration of vibration and shock pick-ups — Part 16: Testing of mounting torque sensitivity▷ISO 5347-18:1993 Methods for the calibration of vibration and shock pick-ups — Part 18: Testing of transient temperature sensitivity▷ISO 5347-22:1997 Methods for the calibration of vibration and shock pick-ups — Part 22: Accelerometer resonance testing — General methods▷ISO 5348:2021 Mechanical vibration and shock — Mechanical mounting of accelerometers▷ISO 7626-1:2011 Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications▷ISO 7626-2:2015 Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter□ ISO/TC 108 사무국의 직접적인 책임 하에 개발 중인 표준 3개 목록▷ISO 16063-1:1998/CD Amd 2 Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts — Amendment 2▷ISO 16063-21:2003/CD Amd 2 Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer — Amendment 2▷ISO 16063-31:2009/WD Amd 1 Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity — Amendment 1□ ISO/TC 108 사무국의 소위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 108/SC 2 Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures ; 발행된 표준 56개, 개발 중인 표준 10개▷ISO/TC 108/SC 4 Human exposure to mechanical vibration and shock ; 발행된 표준 36개, 개발 중인 표준 3개▷ISO/TC 108/SC 5 Condition monitoring and diagnostics of machine systems ; 발행된 표준 28개, 개발 중인 표준 2개▷ISO/TC 108/SC 6 Vibration and shock generating systems ; 발행된 표준 11개, 개발 중인 표준 0개