검색결과
-
[특집-기술위원회] TC107 - 금속 및 기타 무기 코팅(Metallic and other inorganic coatings)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC1~TC67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC68 △1950년 TC74 △1951년 TC76 △1952년 TC77 △1953년 TC79, TC81 △1955년 TC82, TC83 △1956년 TC84, TC85 △1957년 TC86, TC87, TC89 △1958년 TC91, TC92 △1959년 TC94 △1960년 TC96, TC98 △1961년 TC101, TC102, TC 104등 이다.ISO/TC 107 금속 및 기타 무기 코팅(Metallic and other inorganic coatings)과 관련된 기술위원회는 TC 105, TC 106과 마찬가지로 1962년 결성됐다. 사무국은 한국국가기술표준원(Korean Agency for Technology and Standards, KATS)에서 맡고 있다.위원회는 최진혁(Dr Jinhyuk Choi)이 책임지고 있다. 현재 의장은 권식철(Dr Sik-Chol Kwon)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 ISO Editing Team 등으로 조사됐다.범위는 전기 분해, 융합, 진공 또는 화학적 수단, 기계적 증착, 이온 도금을 통해 적용되는 보호 및 장식 금속 코팅 특성의 표준화다.또한 전기 분해, 융합, 진공 또는 화학적 수단을 통해 적용되는 금속 표면의 보호 및 장식용 비금속 코팅(페인트 및 기타 유기 코팅 제외)의 특성도 포함된다.이러한 코팅에 대한 테스트 및 검사 방법의 표준화 뿐 아니라 금속 및 무기 코팅을 증착하기전 기판 준비에 관한 표준화도 포함된다.현재 ISO/TC 107 사무국과 관련해 발행된 표준은 162개며 ISO/TC 107 사무국의 직접적인 책임 하에 발행된 표준은 103개다. ISO/TC 107 사무국과 관련해 개발 중인 표준은 12개며 ISO/TC 107 사무국의 직접적인 책임 하에 개발 중인 표준은 8개다. 참여하고 있는 회원은 22명, 참관 회원은 24명이다.□ ISO/TC 107 사무국의 직접적인 책임하에 발행된 표준 103개 중 15개 목록▷ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method▷ISO 2063-1:2019 Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems▷ISO 2063-2:2017 Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems▷ISO 2064:1996 Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness▷ISO 2080:2022 Metallic and other inorganic coatings — Surface treatment, metallic and other inorganic coatings — Vocabulary▷ISO 2177:2003 Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution▷ISO 2178:2016 Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method▷ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals — Measurement of coating thickness — Amplitude-sensitive eddy-current method▷ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method▷ISO 2746:2015 Vitreous and porcelain enamels — High voltage test▷ISO 2747:1998 Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock▷ISO 2819:2017 Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion▷ISO 3497:2000 Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods▷ISO 3543:2000 Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method▷ISO 3543:2000/Cor 1:2003 Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method — Technical Corrigendum 1□ ISO/TC 107 사무국의 직접적인 책임하에 개발 중인 표준 8개 목록▷ISO/FDIS 3882 Metallic and other inorganic coatings — Review of methods of measurement of thickness▷ISO 8181 Atomic layer deposition — Vocabulary▷ISO/FDIS 14919 Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification and technical supply conditions▷ISO 14920 Thermal spraying — Spraying and fusing of self-fluxing alloys▷ISO/AWI 21452 Specification and requirements of thermal spray coatings for power plant boiler tubes▷ISO/AWI 21456 Determination of the residual stress of TGO layer in thermal barrier coating by photoexcitation fluorescence piezoelectric spectroscopy▷ISO/AWI 21465 Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling▷ISO/DIS 28721-2 Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock□ ISO/TC 107 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▷ISO/TC 107/SC 3 Electrodeposited coatings and related finishes : 발행된 표준 26개, 개발 중인 표준 3개▷ISO/TC 107/SC 4 Hot dip coatings (galvanized, etc.) : 발행된 표준 6개, 개발 중인 표준 0개▷ISO/TC 107/SC 7 Corrosion tests : 발행된 표준 15개, 개발 중인 표준 0개▷ISO/TC 107/SC 8 Chemical conversion coatings : 발행된 표준 6개, 개발 중인 표준 1개▷ISO/TC 107/SC 9 Physical vapor deposition coatings : 발행된 표준 6개, 개발 중인 표준 0개
-
[특집-기술위원회] TC105 - 강철 와이어로프스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC1~TC67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC68 △1950년 TC74 △1951년 TC76 △1952년 TC77 △1953년 TC79, TC81 △1955년 TC82, TC83 △1956년 TC84, TC85 △1957년 TC86, TC87, TC89 △1958년 TC91, TC92 △1959년 TC94 △1960년 TC96, TC98 △1961년 TC101, TC102, TC 104등 이다.ISO/TC 105 강철 와이어로프(Steel wire ropes)와 관련된 기술위원회는 1962년 결성됐다. 사무국은 중국국가표준화관리위원회(中国国家标准化管理委员会, Standardization Administration of China, SAC)에서 맡고 있다.위원회는 웨이준 주(Mr Weijun Zhu)가 책임지고 있다. 현재 의장은 데이브 헤닝거(Mr Dave Henninger)로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 메르세 페레스 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 파비올라 카라골 리베라(Ms Fabiola Caragol Rivera) 등으로 조사됐다.범위는 강철 와이어로프, 와이어로프 종단, 와이어 로프 슬링(무거운 것을 들어올리는 장치) 등의 표준화다. 현재 ISO/TC 105 사무국의 직접적인 책임 하에 발행된 표준은 23개다. ISO/TC 105 사무국의 직접 개발 중인 표준은 2개다. 참여하고 있는 회원은 14명, 참관 회원은 28명이다.□ ISO/TC 105 사무국의 직접적인 책임하에 발행된 표준 23개 중 15개 목록▷ISO 2232:2022 Round non-alloy steel wires for general purpose wire ropes, large diameter wire ropes and mine hoisting wire ropes —Specifications▷ISO 2262:1984 General purpose thimbles for use with steel wire ropes — Specification▷ISO 2408:2017 Steel wire ropes — Requirements▷ISO 3108:2017 Steel wire ropes — Test method — Determination of measured breaking force▷ISO 3444:2023 Stainless-steel wire ropes▷ISO 4101:1983 Drawn steel wire for elevator ropes — Specifications▷ISO 4344:2022 Steel wire ropes for lifts — Minimum requirements▷ISO 4345:1988 Steel wire ropes — Fibre main cores — Specification▷ISO 4346:1977 Steel wire ropes for general purposes — Lubricants — Basic requirements▷ISO 6984:1990 Round non-alloy steel wires for stranded wire ropes for mine hoisting — Specifications▷ISO 7531:1987 Wire rope slings for general purposes — Characteristics and specifications▷ISO 8792:1986 Wire rope slings — Safety criteria and inspection procedures for use▷ISO 8793:1986 Steel wire ropes — Ferrule-secured eye terminations▷ISO 8794:2020 Steel wire ropes — Spliced eye terminations for slings▷ISO 10425:2003 Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance□ ISO/TC 105 사무국의 직접적인 책임하에 개발중인 표준 2개 목록▷ISO/CD 4345 Steel wire ropes — Fibre main cores — Specification▷ISO/PRF 10425 Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance
-
[특집-기술위원회] TC104 - 화물운송용 컨테이너스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC1~TC67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC68 △1950년 TC74 △1951년 TC76 △1952년 TC77 △1953년 TC79, TC81 △1955년 TC82, TC83 △1956년 TC84, TC85 △1957년 TC86, TC87, TC89 △1958년 TC91, TC92 △1959년 TC94 △1960년 TC96, TC98 등이다.ISO/TC 104 화물운송용 컨테이너(Freight containers)와 관련된 기술위원회는 TC101, TC102와 마찬가지로 1961년 결성됐다. 사무국은 미국표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 크리스틴 칼리프라(Ms Kristen Califra)가 책임지고 있다. 현재 의장은 라스 키에르(Mr Lars Kjaer)로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 타마호 타카이(Ms Tamaho Takai), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 용어, 분류, 치수, 사양, 취급, 테스트 방법 및 표시와 관련해 외부 부피가 1입방미터(35.3입방피트) 이상인 화물 컨테이너의 표준화다.현재 ISO/TC 104 사무국과 관련해 발행된 표준은 41개며 직접적인 책임 하에 발행된 표준은 3개다. ISO/TC 104 사무국과 관련해 개발중인 표준은 5개며 직접적인 책임하게 개발중인 표준은 1개다. 참여하고 있는 회원은 19명, 참관 회원은 31명이다.□ ISO/TC 104 사무국의 직접적인 책임하에 발행된 표준 3개 목록▷ISO 830:1999 Freight containers — Vocabulary▷ISO 830:1999/Cor 1:2001 Freight containers — Vocabulary — Technical Corrigendum 1▷ISO 17712:2013 Freight containers — Mechanical seals□ ISO/TC 104 사무국의 직접적인 책임하에 개발중인 표준 1개 목록▷ISO/DIS 830 Freight containers — Vocabulary□ ISO/TC 104 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▷ISO/TC 104/SC 1 General purpose containers ; 발행된 표준 11개, 개발 중인 표준 2개▷ISO/TC 104/SC 2 Specific purpose containers ; 발행된 표준 10개, 개발 중인 표준 1개▷ISO/TC 104/SC 3 Identification and communication ; 발행된 표준 17개, 개발 중인 표준 1개
-
[특집] ISO/TC 93 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC1~TC67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC68 △1950년 TC74 △1951년 TC76 △1952년 TC77 △1953년 TC79, TC81 △1955년 TC82, TC83 △1956년 TC84, TC85 △1957년 TC86, TC87, TC89 등이다.ISO/TC 93 파생물 및 부산물을 포함한 전분(Starch (including derivatives and by-products))과 관련된 기술위원회는 ISO/TC 91, TC92와 마찬가지로 1958년 결성됐다. 사무국은 자메이카표준국(Bureau of Standards Jamaica, BSJ)에서 맡고 있다.위원회는 줄리아 보너 두에테(Mrs Julia Bonner Douett)가 책임지고 있다. 현재 의장은 레일리 던클리(Mr Raylee Dunkley)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 타마호 타카이(Ms Tamaho Takai), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등으로 조사됐다. 범위는 가수 분해 제품 및 덱스트린(녹말 가수분해시 중간단계에서 생기는 여러 가지 가수분해 물질) 포함한 전분 및 부산물의 기술, 샘플링 방법, 분석 및 시험 방법의 표준화다.현재 ISO/TC 93 사무국의 직접적인 책임하에 발행된 표준은 28개다. 참여하고 있는 회원은 9명, 참관 회원은 30명이다.□ ISO/TC 93 사무국의 직접적인 책임하에 발행된 표준 28개 중 15개 목록▲ISO 1666:1996 Starch — Determination of moisture content — Oven-drying method▲ISO 1741:1980 Dextrose — Determination of loss in mass on drying — Vacuum oven method▲ISO 1742:1980 Glucose syrups — Determination of dry matter — Vacuum oven method▲ISO 1743:1982 Glucose syrup — Determination of dry matter content — Refractive index method▲ISO 3188:1978 Starches and derived products — Determination of nitrogen content by the Kjeldahl method — Titrimetric method▲ISO 3593:1981 Starch — Determination of ash▲ISO 3946:1982 Starches and derived products — Determination of total phosphorus content — Spectrophotometric method▲ISO 3947:1977 Starches, native or modified — Determination of total fat content▲ISO 5377:1981 Starch hydrolysis products — Determination of reducing power and dextrose equivalent — Lane and Eynon constant titre method▲ISO 5378:1978 Starches and derived products — Determination of nitrogen content by the Kjeldahl method — Spectrophotometric method▲ISO 5379:2013 Starches and derived products — Determination of sulfur dioxide content — Acidimetric method and nephelometric method▲ISO 5381:1983 Starch hydrolysis products — Determination of water content — Modified Karl Fischer method▲ISO 5809:1982 Starches and derived products — Determination of sulphated ash▲ISO 5810:1982 Starches and derived products — Determination of chloride content — Potentiometric method▲ISO 8355:2023 Starch acetates — Specifications and test methods
-
[영국] 소방전문가협회(ASFP), UKAS 공인 인정기관 LRQA로부터 ISO 9001 인증 획득영국 소방전문가협회(Association for Specialist Fire Protection, ASFP)에 따르면 UKAS 공인 인정기관 LRQA로 부터 2단계 평가를 거쳐 ISO 9001 인증을 획득했다.협회는 ISO 인증을 통해 회원사 및 고객에게 제품과 서비스가 항상 고객의 요구 사항 뿐 아니라 규제 요구사항을 충족하고 있음을 입증한다.ASFP는 ISO 9001 요구사항에 따라 품질 경영시스템(Quality Management System, QMS) 및 품질 매뉴얼(Quality Manual)을 개발하기 위해 노력해왔다.따라서 2022년 후반 지속적인 개선 노력의 일환으로 ISO 인증을 위한 여정을 시작했다. 1단계 평가는 올해 2월 실시됐으며 ISO 9001에 지정된 모든 요구 사항을 적용했는지 확인하기 위해 시스템을 검토했다. 새로운 시스템과 마찬가지로 몇 가지 차이가 확인됐다.제3자 독립기관인 LRQA는 1차 평가에서 발견한 5가지 지적 사항에 대해 추가 작업을 요구했다. 개선 후 2023년 5월 2단계 평가를 완료해 최종적으로 ISO 인증을 획득했다.ISO 9001은 제품 및 서비스 품질을 개선해 고객 또는 구성원의 기대치를 충족시키려는 조직을 위해 고안된 일련의 표준 중 하나다. 품질 경영시스템(QMS)에 대한 기준을 설정하고 인증할 수 있는 제품군의 유일한 표준이다.강력한 고객 중심, 최고 경영진의 동기부여, 프로세스 접근 방식, 지속적인 개선을 포함해 여러 품질 원칙을 기반으로 인증을 진행하고 있다.
-
[특집] ISO/TC 87 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 1947년 TC1~TC67, 1948년 TC 69, 1949년 TC 70~72, 1972년 TC68, 1950년 TC74, 1951년 TC76, 1952년 TC77, 1953년 TC79, TC81, 1955년 TC82, TC83, 1956년 TC84, TC85 등이다.ISO/TC 87 코르크(Cork)와 관련된 기술위원회는 ISO/TC 86과 마찬가지로 1957년 결성됐다. 사무국은 포르투갈 품질관리위원회(Instituto Português da Qualidade, IPQ)에서 맡고 있다.위원회는 밀턴 게데스(Mr Milton Guedes)가 책임진다. 현재 의장은 장 미셸 리불레(M Jean-Michel Riboulet)로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 모니카 이비도(Ms Monica Ibido), ISO 편집 관리자는 빈센조 바추키(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 코르크 분야, 원료 및 크로크로 제조 및 준비된 제품의 표준화다. 현재 ISO/TC 87 사무국과 관련해 발행된 표준은 41개며 ISO/TC 87 사무국과 관련해 개발 중인 표준은 8개다. 참여하고 있는 회원은 7명, 참관 회원은 14명이다.□ ISO/TC 87 사무국의 직접 책임 하에 발행된 표준 41개 중 15개 목록▲ISO 633:2019 Cork — Vocabulary▲ISO 1215:2015 Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, corkwaste, boiled cork pieces and raw corkwaste — Definitions and packaging▲ISO 1216:2017 Boiled reproduction cork — Grading, classification and packing▲ISO 1997:2018 Granulated cork and cork powder — Classification, properties and packing▲ISO 2030:2018 Granulated cork — Size analysis by mechanical sieving▲ISO 2031:2015 Granulated cork — Determination of apparent bulk density▲ISO 2066:2004 Resilient floor coverings — Determination of moisture content of agglomerated composition cork▲ISO 2067:2019 Granulated cork, broken cork and crushed cork — Sampling for the determination of moisture content▲ISO 2190:2016 Granulated cork — Determination of moisture content▲ISO 2219:2010 Thermal insulation products for buildings — Factory-made products of expanded cork (ICB) — Specification▲ISO 2385:2020 Packed cork — Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste — Sampling to determine moisture content▲ISO 2386:2019 Packed cork — Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste — Determination of moisture content▲ISO 2509:1989 Sound-absorbing expanded pure agglomerated cork in tiles▲ISO 3810:1987 Floor tiles of agglomerated cork — Methods of test▲ISO 3850:2004 Resilient floor coverings - Determination of apparent density of composition cork□ ISO/TC 87 사무국의 직접 책임 하에 개발 중인 표준 8개 목록▲ISO/AWI 9727-1 Cylindrical cork stoppers — Physical tests — Part 1: Determination of dimensions▲ISO/AWI 9727-2 Cylindrical cork stoppers — Physical tests — Part 2: Determination of mass and apparent density for agglomerated cork stoppers▲ISO/AWI 9727-3 Cylindrical cork stoppers — Physical tests — Part 3: Determination of humidity content▲ISO/AWI 9727-4 Cylindrical cork stoppers — Physical tests — Part 4: Determination of dimensional recovery after compression▲ISO/AWI 9727-5 Cylindrical cork stoppers — Physical tests — Part 5: Determination of extraction force▲ISO/AWI 9727-6 Cylindrical cork stoppers — Physical tests — Part 6: Determination of liquid tightness▲ISO/AWI 9727-7 Cylindrical cork stoppers — Physical tests — Part 7: Determination of dust content▲ISO/DIS 20752 Cork stoppers — Determination of releasable 2, 4, 6-trichloroanisol (TCA)
-
[특집] ISO/TC 85 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년 구성된 TC77, 1953년에 구성된 TC79, TC81, 1955년 구성된 TC82, TC83 등이다.ISO/TC 85 원자력, 원자력 기술 및 방사선 보호(Nuclear energy, nuclear technologies, and radiological protection)와 관련된 기술위원회는 TC84와 마찬가지로 1956년 결성됐다.사무국은 프랑스표준화협회(Association Française de Normalisation, AFNOR)에서 맡고 있다. 위원회는 나탈리 게슬린(Mme Nathalie Geslin)가 책임진다. 현재 의장은 올리비에 마르샹(M Olivier Marchand)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 키르시 실란더-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 빈센조 바추키(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 원자력 에너지, 원자력 기술의 평화적 적용 분야 및 모든 전리 방사선원으로부터 개인과 환경을 보호하는 분야의 표준화다.현재 ISO/TC 85 사무국과 관련해 발행된 표준은 256개며 ISO/TC 85의 직접적인 책임 하에 발행된 표준은 35개다. ISO/TC 85 사무국과 관련해 개발 중인 표준은 53개며 직접적인 책임하에 개발중인 표준은 2개다. 참여하고 있는 회원은 26명, 참관 회원은 21명이다.□ ISO/TC 84 사무국의 직접 책임 하에 발행된 표준 35개 중 15개 목록▲ISO 361:1975 Basic ionizing radiation symbol▲ISO/TR 4450:2020 Quality management systems — Guidance for the application of ISO 19443:2018▲ISO 12749-1:2020 Nuclear energy — Vocabulary — Part 1: General terminology▲ISO 12749-2:2022 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological protection▲ISO 12749-3:2015 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear fuel cycle▲ISO 12749-4:2015 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 4: Dosimetry for radiation processing▲ISO 12749-5:2018 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 5: Nuclear reactors▲ISO 12749-6:2020 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 6: Nuclear medicine▲ISO 19443:2018 Quality management systems — Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS)▲ISO/TS 23406:2020 Nuclear sector — Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS)▲ISO/ASTM 51026:2015 Practice for using the Fricke dosimetry system▲ISO/ASTM 51205:2017 Practice for use of a ceric-cerous sulfate dosimetry system▲ISO/ASTM 51261:2013 Practice for calibration of routine dosimetry systems for radiation processing▲ISO/ASTM 51275:2013 Practice for use of a radiochromic film dosimetry system▲ISO/ASTM 51276:2019 Practice for use of a polymethylmethacrylate dosimetry system□ ISO/TC 84 사무국의 직접 책임 하에 개발 중인 표준 2개 목록▲ISO/DIS 12749-3 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear installations, processes and technologies▲ISO/CD TS 23406 Nuclear sector — Requirements for bodies providing audit and certification of quality management systems for organizations supplying products and services important to nuclear safety (ITNS)□ ISO/TC 85 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 85/SC 2 Radiological protection ; 발행된 표준 121개, 개발 중인 표준 28개▲ISO/TC 85/SC 5 Nuclear installations, processes and technologies ; 발행된 표준 84개, 개발 중인 표준 15개▲ISO/TC 85/SC 6 Reactor technology ; 발행된 표준 18개, 개발 중인 표준 8개
-
[특집] ISO/TC 84 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년 구성된 TC77, 1953년에 구성된 TC79, TC81, 1955년 구성된 TC82, TC83 등이다.ISO/TC 84 의약품 및 카테터 투여용 장치(Devices for administration of medicinal products and catheters)와 관련된 기술위원회는 1956년 결성됐다.사무국은 덴마크표준재단(Danish Standards Foundation, DS)에서 맡고 있다. 위원회는 비비 넬레모스(Bibi Nellemose)가 책임진다. 현재 의장은 로버트 R. 네스빗(Mr Robert R. Nesbitt)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 크리스텔 간손레(Ms Christelle Gansonre) 등으로 조사됐다. 범위는 의약품 투여를 위한 계량 장치 및 공급품의 성능 표준화, 주사기, 바늘, 카테터 등의 표준화다.□ 다음 사항은 표준화에서 제외한다.▷ 진단용 비카테터 장치▷ ISO/TC 121에 의해 적용되는 폐 인공 호흡기 및 산소 치료 장치를 포함한 마취 및 호흡 장비▷ ISO/TC 106에 의해 적용되는 치과용 카트리지 시스템▷ ISO/TC 76에서 다루는 미리 채워진 주사기를 포함한 구성 요소 및 장치에 대한 특정 요구사항현재 ISO/TC 84 사무국과 관련해 발행된 표준은 36개며 ISO/TC 83 사무국과 관련해 개발 중인 표준은 8개다. 참여하고 있는 회원은 30명, 참관 회원은 29명이다.□ ISO/TC 84 사무국의 직접 책임 하에 발행된 표준 36개 중 15개 목록▲ISO 6009:2016 Hypodermic needles for single use — Colour coding for identification▲ISO 7864:2016 Sterile hypodermic needles for single use — Requirements and test methods▲ISO 7886-1:2017 Sterile hypodermic syringes for single use — Part 1: Syringes for manual use▲ISO 7886-2:2020 Sterile hypodermic syringes for single use — Part 2: Syringes for use with power-driven syringe pumps▲ISO 7886-3:2020 Sterile hypodermic syringes for single use — Part 3: Auto-disabled syringes for fixed-dose immunization▲ISO 7886-4:2018 Sterile hypodermic syringes for single use — Part 4: Syringes with re-use prevention feature▲ISO 8537:2016 Sterile single-use syringes, with or without needle, for insulin▲ISO 9626:2016 Stainless steel needle tubing for the manufacture of medical devices — Requirements and test methods▲ISO 10555-1:2013 Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements▲ISO 10555-1:2013/Amd 1:2017 Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements — Amendment 1▲ISO 10555-3:2013 Intravascular catheters — Sterile and single-use catheters — Part 3: Central venous catheters▲ISO 10555-4:2013 Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters▲ISO 10555-5:2013 Intravascular catheters — Sterile and single-use catheters — Part 5: Over-needle peripheral catheters▲ISO 10555-6:2015 Intravascular catheters — Sterile and single-use catheters — Part 6: Subcutaneous implanted ports▲ISO 10555-6:2015/Amd 1:2019 Intravascular catheters — Sterile and single-use catheters — Part 6: Subcutaneous implanted ports — Amendment 1□ ISO/TC 84 사무국의 직접 책임 하에 개발 중인 표준 8개 목록▲ISO/AWI TS 4452 Specification and demonstration of system reliability of single-use drug delivery systems▲ISO/FDIS 10555-1 Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements▲ISO/FDIS 10555-4 Intravascular catheters — Sterile and single-use catheters — Part 4: Balloon dilatation catheters▲ISO/DIS 10555-7 Intravascular catheters — Sterile and single-use catheters — Part 7: Peripherally inserted central catheters▲ISO/DIS 10555-8 Intravascular catheters — Sterile and single-use catheters — Part 8: Catheters for extracorporeal blood treatment▲ISO/AWI 18138 Procedures and devices for the removal, containment and disposal of scalpel blades from scalpel handles▲ISO/DIS 23217.2 Injection systems for self-administration by paediatric patients — Guidelines for design▲ISO/CD 23908 Sharps injury protection — Requirements and test methods — Sharps protection features for single-use needles, introducers for catheters and needles used for blood testing, monitoring, sampling and medical substance administration
-
[특집] ISO/TC 83 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년 구성된 TC77, 1953년에 구성된 TC79, TC81 등이다.ISO/TC 83 스포츠 및 기타 레크레이션 시설·장비(Sports and other recreational facilities and equipment)와 관련된 기술위원회는 TC82와 마찬가지로 1955년 결성됐다.사무국은 독일표준협회(Deutsches Institut für Normung, DIN)에서 맡고 있다. 위원회는 레티시아 데 안다 곤살레스(Mrs Dipl.-Kffr Leticia de Anda González)이 책임진다. 현재 의장은 마이클 하우스(Mr Michael Haus)로 임기는 2028년까지다.ISO 기술 프로그램 관리자는 샐리 스윙우드(Ms Sally Swingewood), ISO 편집 관리자는 이본 첸(Mrs Yvonne Chen) 등으로 조사됐다.범위는 전통적인 것을 포함한 물리적, e-스포츠를 포함한 가상 스포츠를 위한 관련 테스트 장비를 포함하는 테스트뿐만 아니라 용어, 치수, 허용 오차, 기능, 운영, 유지 관리, 훈련, 성능 및 안전 요구 사항의 표준화다.다음에 대한 표준의 개발 및 유지 관리는 포함된다. △스포츠 및 레크리에이션 시설 △레크리에이션 목적을 위한 장비를 포함한 장비로 로프 코스, 놀이터, 공기주입식 기구, 워터 슬라이드, 캠핑 텐트, 레크리에이션 트레일, 수상 레저 용품, 침낭, 아이스하키, 스노우 스포츠, 스포츠 장비 및 시설 등이 해당된다. 다만 ISO/TC 254 범위 내에서 국제표준이 적용되는 놀이기구 및 놀이 장치는 제외된다.현재 ISO/TC 83 사무국과 관련해 발행된 표준은 97개며 이 중 ISO/TC 83 사무국의 직접적인 책임 하에 개발된 표준은 35개다.ISO/TC 83 사무국과 관련해 개발 중인 표준은 21개며 이중 직접적인 책임 하에 개발 중인 표준은 14개다. 참여하고 있는 회원은 35명, 참관 회원은 18명이다.□ ISO/TC 83 사무국의 직접 책임 하에 발행된 표준 35개 중 15개 목록▲ISO 4980:2023 Benefit-risk assessment for sports and recreational facilities, activities and equipment▲ISO 5912:2020 Camping tents — Requirements and test methods▲ISO 7152:2023 Camping tents and caravan awnings — Vocabulary▲ISO 8936:2017 Awnings for leisure accommodation vehicles — Requirements and test methods▲ISO 11416:1995 Tennis rackets — Racket components and physical parameters▲ISO 19202-1:2017 Summer toboggan runs — Part 1: Safety requirements and test methods▲ISO 19202-2:2017 Summer toboggan runs — Part 2: Safety requirements for operation▲ISO/TR 20183:2015 Sports and other recreational facilities and equipment — Injury and safety definitions and thresholds — Guidelines for their inclusion in standards▲ISO 20187-1:2022 Inflatable play equipment — Part 1: Safety requirements and test methods▲ISO 20187-2:2022 Inflatable play equipment — Part 2: Additional safety requirements for inflatable bouncing pillows intended for permanent installation▲ISO 20187-3:2022 Inflatable play equipment — Part 3: Additional safety requirements and test methods for snappies▲ISO 20380:2017 Public swimming pools — Computer vision systems for the detection of drowning accidents in swimming pools — Safety requirements and test methods▲ISO 20957-1:2013 Stationary training equipment — Part 1: General safety requirements and test methods▲ISO 20957-2:2020 Stationary training equipment — Part 2: Strength training equipment, additional specific safety requirements and test methods▲ISO 20957-4:2016 Stationary training equipment — Part 4: Strength training benches, additional specific safety requirements and test methods□ ISO/TC 83 사무국의 직접 책임 하에 개발중인 표준 14개 목록▲ISO/AWI 20288 Public Swimming Pools — Systems recognizing involuntarily submersion of humans in managed aquatic facilities▲ISO/CD 20957-1 Stationary training equipment — Part 1: General safety requirements and test methods▲ISO/DIS 20957-2 Stationary training equipment — Part 2: Strength training equipment — Additional specific safety requirements and test methods▲ISO/DIS 20957-7 Stationary training equipment — Part 7: Rowing equipment — Additional specific safety requirements and test methods▲ISO 23537-2 Requirements for sleeping bags — Part 2: Fabric and material properties▲ISO/DTS 24665 Playground and recreational areas — Framework for the competence of playground inspectors and playground maintenance technicians▲ISO/TR 24666 Sports and recreational facilities — Probes for entrapment/entanglement on playground equipment — Collection of data▲ISO/DIS 25649-1 Floating leisure articles for use on and in the water — Part 1: Classification, materials, general requirements and test methods▲ISO/DIS 25649-2 Floating leisure articles for use on and in the water — Part 2: Consumer information▲ISO/DIS 25649-3 Floating leisure articles for use on and in the water — Part 3: Additional specific safety requirements and test methods for Class A devices▲ISO/DIS 25649-4 Floating leisure articles for use on and in the water — Part 4: Additional specific safety requirements and test methods for Class B devices▲ISO/DIS 25649-5 Floating leisure articles for use on and in the water — Part 5: Additional specific safety requirements and test methods for Class C devices▲ISO/DIS 25649-6 Floating leisure articles for use on and in the water — Part 6: Additional specific safety requirements and test methods for Class D devices▲ISO/DIS 25649-7 Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for Class E devices□ ISO/TC 83 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 83/SC 4 Snowsports equipment ; 발행된 표준 47개, 개발 중인 표준 2개▲ISO/TC 83/SC 5 Ice hockey equipment and facilities ; 발행된 표준 5개, 개발 중인 표준 5개▲ISO/TC 83/SC 6 Martial arts ; 발행된 표준 10개, 개발 중인 표준 0개
-
[특집] ISO/TC 82 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1949년에 구성된 TC 70~72, 1972년 구성된 TC68, 1950년 구성된 TC74, 1951년 구성된 TC76, 1952년 구성된 TC77, 1953년에 구성된 TC79, TC81 등이다.ISO/TC 82 광업(Mining)과 관련된 기술위원회는1955년 결성됐다. 사무국은 독일표준협회(Deutsches Institut für Normung, DIN)에서 맡고 있다. 위원회는 요른 레만(Mr Jörn Lehmann)이 책임진다. 현재 의장은게오르그 Chr. 필러((FH) Georg Chr. Piller)로 임기는 2027년까지다.ISO 기술 프로그램 관리자는 메르세 페레스 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 빈센조 바추키(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 컨베어, 고벽 채굴기, 암석 채굴장비, 연속 표층 채굴기 등 노천광산에서 사용되는 특수 채굴 기계 및 장비와 관련한 표준화다.또한 도로 헤더, 연속 채굴기, 암석 채굴장비, 굴착기, 고벽 체굴기, LHD, 광업 오거 보링기계, RMDS(급속 광산 개발 시스템) 등 고체 광물질의 추출을 위한 모든 지하 채굴 기계 및 장비의 표준화도 추진하고 있다.광산 측량에 사용되는 계획 및 도면을 제시할 때 권장되는 관행, 광물 매장량 계산 방법, 광산 매립 관리, 광산 산업을 위한 구조물 설계, 특수 피난처 및 구조실, 샤프트 보링 머신 등도 표준화 대상이다. 단 다음 항목은 표준화 범위에서 제외된다.△파일링, 다이어프램 월링, 어스 보링, 제트, 그라우팅, 토양 및 암석 혼합물용 드릴 장비 등의 기초 기계(ISO/TC 195)△스크리닝, 파쇄 등 골재 처리 기계△폭발성 대기에서 사용되는 장비 및 보호 시스템(IEC/TC 31)△휴대용 착암기(ISO/TC 118)△토목 기계(ISO/TC 127)△지질 공학(ISO/TC 182)△터널 굴착기(TBM) 및 관련 기계 및 장비(ISO/TC 195) 등이다.현재 ISO/TC 82 사무국과 관련해 발행된 표준은 61개며 이 중 ISO/TC 82 사무국의 직접적인 책임 하에 개발된 표준은 58개다.ISO/TC 82 사무국과 관련해 개발중인 표준은 13개며 이중 직접적인 책임 하에 개발 중인 표준은 8개다. 참여하고 있는 회원은 25명, 참관 회원은 24명이다.□ ISO/TC 82 사무국의 직접 책임 하에 발행된 표준 58개 중 15개 목록▲ISO 610:1990 High-tensile steel chains (round link) for chain conveyors and coal ploughs▲ISO 710-1:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 1: General rules of representation▲ISO 710-2:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 2: Representation of sedimentary rocks▲ISO 710-3:1974 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 3: Representation of magmatic rocks▲ISO 710-4:1982 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 4: Representation of metamorphic rocks▲ISO 710-5:1989 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 5: Representation of minerals▲ISO 710-6:1984 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering▲ISO 710-7:1984 Graphical symbols for use on detailed maps, plans and geological cross-sections — Part 7: Tectonic symbols▲ISO 721:1991 Rock drilling equipment — Integral stems▲ISO 722:1991 Rock drilling equipment — Hollow drill steels in bar form, hexagonal and round▲ISO 723:1991 Rock drilling equipment — Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels▲ISO 1082:1990 Mining — Shackle type connector units for chain conveyors▲ISO 1717:1974 Rock drilling — Rotary drill-rods and rotary drill-bits for dry drilling — Connecting dimensions▲ISO 1718:1991 Rock drilling equipment — Drill rods with tapered connection for percussive drilling▲ISO 1721:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm)□ ISO/TC 82 사무국의 직접 책임 하에 개발중인 표준 8개 목록▲ISO/AWI 12848 Mine hoists and mine winders-Safety requirements▲ISO/AWI 18758 Mining, earth-moving and construction machinery — Rock drill rigs and rock reinforcement rigs — Safety requirements▲ISO/AWI TS 20268 Inspection and Maintenance of Mine Shaft and Associated Structures▲ISO/CD 22932-6 Mining — Vocabulary — Part 6: Mine hosting equipment▲ISO/CD 22932-7 Mining — Vocabulary — Part 7: Ventilation▲ISO/CD 22932-8 Mining — Vocabulary — Part 8: Extraction▲ISO/CD 22932-9 Mining — Vocabulary — Part 9: Drainage▲ISO/AWI 22932-10 Mining — Vocabulary — Part 10: Haulage□ ISO/TC 82 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 82/SC 7 Mine closure and reclamation management ; 발행된 표준 3개, 개발 중인 표준 3개▲ISO/TC 82/SC 8 Advanced automated mining systems ; 발행된 표준 0개, 개발 중인 표준 2개