검색결과
-
[특집] ISO/TC 71 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 71 콘크리트, 강화 콘크리트, 프리스트레스 콘크리트(Concrete, reinforced concrete and pre-stressed concrete)과 관련된 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1972년 구성된 TC68과 달리 TC 70과 마찬가지로 1949년 만들어졌다.사무국은 일본 산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다. 위원회는 히로시 요코타(Dr Hiroshi Yokota)가 책임진다. 의장은 다문 우에다( Dr Tamon Ueda)으로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 앤 캐서린 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 품질 및 가격 절감 측면에서 점진지거 개발을 보장하기 위해 콘크리트 기술, 콘크리트 및 강회 콘크리트, 프리스트레스 콘크리트 구조물의 설계와 구조에 대한 표준화다. 연구 작업의 국제적 교류를 촉진하기 위한 테스트 절차뿐 아니라 정의와 용어의 표준화도 포함된다.현재 ISO/TC 71 사무국의 직접적인 책임하에 발행된 표준은 1개며 ISO/TC 71 사무국과 관련해 발행된 표준은 73개다.ISO/TC 71 사무국의 직접적인 책임하에 개발 중인 표준은 2개 ISO/TC 71 사무국과 관련해 개발 중인 표준은 31개다. 참여하고 있는 회원은 31명, 참관 회원은 63명이다.□ ISO/TC 71 사무국의 직접적인 책임하에 발행된 표준 1개 목록▲ISO 22040:2021 Life cycle management of concrete structures□ ISO/TC 71 사무국의 직접적인 책임하에 개발 중인 표준 2개 목록▲ISO/WD 16521 Design standard for concrete-filled steel tubular (CFST) hybrid structures▲ISO/CD 22040-2 Life cycle management of concrete structures — Part 2: Structural planning and design□ ISO/TC 71 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 71/SC 1 Test methods for concrete ; 발행된 표준 23개, 개발 중인 표준 1개▲ISO/TC 71/SC 3 Concrete production and execution of concrete structures ; 발행된 표준 11개, 개발 중인 표준 4개▲ISO/TC 71/SC 4 Performance requirements for structural concrete ; 발행된 표준 1개, 개발 중인 표준 1개▲ISO/TC 71/SC 5 Simplified design standard for concrete structures ; 발행된 표준 9개, 개발 중인 표준 0개▲ISO/TC 71/SC 6 Non-traditional reinforcing materials for concrete structures ; 발행된 표준 11개, 개발 중인 표준 6개▲ISO/TC 71/SC 7 Maintenance and repair of concrete structures ; 발행된 표준 12개, 개발 중인 표준 13개▲ISO/TC 71/SC 8 Environmental management for concrete and concrete structures ; 발행된 표준 5개, 개발 중인 표준 4개
-
[특집] ISO/TC 70 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 70 내연기관(Internal combustion engines)과 관련된 기술위원회는 1947년 구성된 TC1~TC67, 1948년 구성된 TC 69, 1972년 구성된 TC68과 달리 1949년 만들어졌다.사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, SAC)에서 맡고 있다. 위원회는 웨이빈 지(Mr Weibin Ji)이 책임진다. 의장은 슈링 우(Mr Xuling Wu)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등으로 조사됐다.범위는 엔진과 구동 기계 및 환경 간 관계를 고려한 정의, 성능/테스트 및 특수 요구 사항을 포함해 왕복 및 회전 변위 내연 기관 분야의 표준화다.■ 단, 도로 차량 및 항공기를 추진하는 데 사용되는 왕복 및 회전 변위 엔진은 제외한다.현재 ISO/TC 70 사무국의 직접적인 책임하에 발행된 표준은 49개며 ISO/TC 70 사무국과 관련해 발행된 표준은 74개다.ISO/TC 70 사무국의 직접적인 책임하에 개발 중인 표준은 4개 ISO/TC 70 사무국과 관련해 개발 중인 표준은 7개다. 참여하고 있는 회원은 15명, 참관 회원은 23명이다.□ ISO/TC 70 사무국의 직접적인 책임하에 발행된 표준 15개 목록▲ISO 1204:1990 Reciprocating internal combustion engines — Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine▲ISO 2261:1994 Reciprocating internal combustion engines — Hand-operated control devices — Standard direction of motion▲ISO 2710-1:2017 Reciprocating internal combustion engines — Vocabulary — Part 1: Terms for engine design and operation▲ISO 2710-2:2019 Reciprocating internal combustion engines — Vocabulary — Part 2: Terms for engine maintenance▲ISO 3046-1:2002 Reciprocating internal combustion engines — Performance — Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods — Additional requirements for engines for general use▲ISO 3046-3:2006 Reciprocating internal combustion engines — Performance — Part 3: Test measurements▲ISO 3046-4:2009 Reciprocating internal combustion engines — Performance — Part 4: Speed governing▲ISO 3046-5:2001 Reciprocating internal combustion engines — Performance — Part 5: Torsional vibrations▲ISO 3046-6:2020 Reciprocating internal combustion engines — Performance — Part 6: Overspeed protection▲ISO 6798-1:2020 Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 1: Engineering method▲ISO 6798-2:2020 Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 2: Survey method▲ISO 6798-3:2022 Reciprocating internal combustion engines — Measurement of sound power level using sound pressure — Part 3: Survey method for use in situ▲ISO 6826:2022 Reciprocating internal combustion engines — Fire protection▲ISO 7967-1:2005 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 1: Structure and external covers▲ISO 7967-2:2010 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 2: Main running gear□ ISO/TC 70 사무국의 직접적인 책임하게 개발 중인 표준 4개 목록▲ISO/WD 8528-5 Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets▲ISO/FDIS 8528-6 Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods▲ISO/WD 8528-13 Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety▲ISO/WD TS 19425 Reciprocating internal combustion engines — Measurement method for air cleaners — Sound power level of combustion air inlet noise and insertion loss using sound pressure□ ISO/TC 70 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 70/SC 7 Tests for lubricating oil filters ; 발행된 표준 14개, 개발 중인 표준 3개▲ISO/TC 70/SC 8 Acceptance sampling ; 발행된 표준 11개, 개발 중인 표준 0개▲ISO/TC 68/SC 6 Measurement methods and results ; 발행된 표준 36개, 개발 중인 표준 5개▲ISO/TC 68/SC 7 Applications of statistical and related techniques for the implementation of Six Sigma ; 발행된 표준 13개, 개발 중인 표준 0개▲ISO/TC 68/SC 8 Exhaust gas emission measurement ; 발행된 표준 10개, 개발 중인 표준 0개
-
[특집] ISO/TC 69 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 69 통계적 방법의 적용(Applications of statistical methods)과 관련된 기술위원회는 1947년 구성된 TC1~TC67, 1972년 구성된 TC68과 달리 1948년 만들어졌다.사무국은 미국 표준협회(American National Standard Institute, ANSI)에서 맡고 있다. 위원회는 제니퍼 애드무센(Ms Jennifer Admussen)이 책임진다. 의장은 켈리 블랙(Ms Kelly Black)으로 임기는 2027년까지다.ISO 기술 프로그램 관리자는 메르체 페레스 헤르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 빈센조 바추키(M Vincenzo Bazzucchi) 등으로 조사됐다. 범위는 데이터의 생성 및 수집(계획 및 디자인), 분석, 표시, 해석을 포함한 통계적 방법의 적용 분야 표준화다.■ 주의이사회 결의안 12/1959 및 이사회 결의안 26/1961에 의해 ISO 이사회는 표준화에 통계적 방법을 적용하는 것과 관련된 문제에 모든 ISO 기술 위원회를 위한 자문 역할을 ISO/TC 69에 맡겼다.현재 ISO/TC 69 사무국의 직접적인 책임하에 발행된 표준은 18개며 ISO/TC 69 사무국과 관련해 발행된 표준은 125개다. ISO/TC 69 사무국의 직접적인 책임하에 개발 중인 표준은 1개 ISO/TC 69 사무국과 관련해 개발 중인 표준은 13개다. 참여하고 있는 회원은 20명, 참관 회원은 36명이다.□ ISO/TC 69 사무국의 직접적인 책임하에 발행된 표준 18개 목록▲ISO 2602:1980 Statistical interpretation of test results — Estimation of the mean — Confidence interval▲ISO 2854:1976 Statistical interpretation of data — Techniques of estimation and tests relating to means and variances▲ISO 3301:1975 Statistical interpretation of data — Comparison of two means in the case of paired observations▲ISO 3494:1976 Statistical interpretation of data — Power of tests relating to means and variances▲ISO 3534-1:2006 Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability▲ISO 3534-2:2006 Statistics — Vocabulary and symbols — Part 2: Applied statistics▲ISO 3534-3:2013 Statistics — Vocabulary and symbols — Part 3: Design of experiments▲ISO 3534-4:2014 Statistics — Vocabulary and symbols — Part 4: Survey sampling▲ISO 5479:1997 Statistical interpretation of data — Tests for departure from the normal distribution▲ISO 11453:1996 Statistical interpretation of data — Tests and confidence intervals relating to proportions▲ISO 11453:1996/Cor 1:1999 Statistical interpretation of data — Tests and confidence intervals relating to proportions — Technical Corrigendum 1▲ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software▲ISO 16269-4:2010 Statistical interpretation of data — Part 4: Detection and treatment of outliers▲ISO 16269-6:2014 Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals▲ISO 16269-7:2001 Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals▲ISO 16269-8:2004 Statistical interpretation of data — Part 8: Determination of prediction intervals▲ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization▲ISO 28640:2010 Random variate generation methods□ ISO/TC 69 사무국의 직접적인 책임하게 개발 중인 표준 1개 목록▲ISO/AWI TR 23348 Statistics — Big Data Analytics — Model Validation□ ISO/TC 69 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 68/SC 4 Applications of statistical methods in product and process management ; 발행된 표준 21개, 개발 중인 표준 5개▲ISO/TC 68/SC 5 Acceptance sampling ; 발행된 표준 27개, 개발 중인 표준 2개▲ISO/TC 68/SC 6 Measurement methods and results ; 발행된 표준 36개, 개발 중인 표준 5개▲ISO/TC 68/SC 7 Applications of statistical and related techniques for the implementation of Six Sigma ; 발행된 표준 13개, 개발 중인 표준 0개▲ISO/TC 68/SC 8 Application of statistical and related methodology for new technology and product development ; 발행된 표준 10개, 개발 중인 표준 0개
-
[특집] ISO/TC 68 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 68 금융서비스(Financial services)와 관련된 기술위원회는 1947년 구성된 TC1~TC67과 달리 1972년 만들어졌다.사무국은 미국 표준협회(American National Standard Institute, ANSI)에서 맡고 있다. 위원회는 자넷 시(Ms Janet Busch)가 책임진다. 의장은 짐 노세이(Mr Jim Northey)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 샐리 스윙우드(Ms Sally Swingewood), ISO 편집 관리자는 데이비드 리드(Mr David Reid) 등으로 조사됐다. 범위는 은행, 보안, 기타 금융서비스 분야의 표준화다.TC 68(ISO/TC 68)은 금융 서비스 산업의 글로벌 표준을 만드는 일을 담당하고 있다. 또한 자산 관리, 지불, 신용 카드 처리 및 금융 서비스에 특정한 정보 보안 측면을 포함한 코어 뱅킹(core banking), 자본 시장을 다루는 표준을 책임지고 있다. 위원회는 SC2(정보 보안), SC8(참조 데이터) 및 SC9(정보 교환)의 3개 분과로 구성된다. 소위원회, 자문 그룹 및 작업 그룹을 통한 TC 68의 초점은 다음과 같다.▶진화하는 비즈니스 요구 사항, 혁신 및 규제 요구 사항을 지원하기 위한 새로운 표준 개발 식별▶기존 국제 표준의 채택 촉진▶ISO, 기타 표준 및 독점 접근 방식의 공존 관리▶업계 이해관계자의 참여 확인 및 확보 현재 ISO/TC 68 사무국과 관련돼 발행된 표준은 75개며 ISO/TC 68 사무국과 관련해 개발중인 표준은 22개다. 참여하고 있는 회원은 36명, 참관 회원은 49명이다.□ ISO/TC 68 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 68/SC 2 Financial Services, security ; 발행된 표준 17개, 개발 중인 표준 8개▲ISO/TC 68/SC 8 Reference data for financial services ; 발행된 표준 21개, 개발 중인 표준 5개▲ISO/TC 68/SC 9 Information exchange for financial services ; 발행된 표준 37개, 개발 중인 표준 9개
-
공간정보 전문가 한자리에 모여 국제표준 성과 공유한다국토교통부는 15일부터 5일간 전주에서 국제표준화기구(ISO/TC 211)와 함께 제56차 공간정보 분야 국제표준화기구 총회를 개최한다고 밝혔다. ISO/TC 211은 공간정보 분야의 국제표준화를 위한 기술위원회로 1994년 6월 ISO에서 211번째로 구성됐으며, 우리나라는 1995년 1월 정회원으로 가입해 국제표준화에 적극적으로 참여하고 있다. 이번 총회는 국토부가 2017년 산업통상자원부로부터 국토교통 분야 표준 개발·운영 업무를 위탁받은 후 최초로 국내에서 개최하는 국제표준 회의이며, 국내 최초의 디지털 트윈국토 시범사업도시인 전주에서 개최돼 의미가 크다. 이번 총회를 계기로 71개 회원국 대표단 80여 명을 비롯해 공간정보 분야 표준 전문가 및 산학연관 관계자 등 총 300여 명이 참여할 예정이며, 공간정보 표준화 회의, 표준화 사례 발표 세미나·포럼, 표준 전략 자문 및 의장단 회의 등이 열릴 예정이다. 특히 17일에는 일반인이 온·오프라인으로 참석할 수 있는 오픈세션 프로그램을 마련했으며, 온라인 사전 등록을 통해 실시간 참여가 가능하다. 오픈세션 프로그램은 'Standard in Action 세미나'와 '공간정보표준 발전포럼'으로 나눠 순차적으로 진행하고, 세미나는 정부의 대표 정책사업인 디지털 트윈국토, 신기술 활용, 디지털 트랜스포메이션 등 3가지 주제로 14건의 기술 발표가 진행될 예정이다. 특히 포럼에서는 최갑홍 성균관대학교 교수(전 국가표준원장)와 피터 파슬로우(Peter Parslow) ISO/TC 211 의장의 기조발표에 이어 '미래 모빌리티를 위한 디지털맵 표준(박일석 카카오모빌리티 이사)', '대한민국 공간정보 표준화 정책(국토교통부)', '디지털 트위국토 시범 사례(한국국토정보공사LX)' 등의 발표를 통해 민간·공공의 공간정보 기술 및 표준 현황, 정부의 정책방향 등을 논의할 계획이다. 총회 주관기관인 한국국토정보공사의 김정렬 사장은 "LX 및 민간 표준 전문가들이 국내 최초로 ISO 19109 응용스키마 국제표준 개정 프로젝트를 진행하는 단계에서, 이번 총회가 그간 성과들을 확산·공유하는 장이 될 것"이라고 밝혔다. 문성요 국토부 국토도시실장은 "디지털 대전환 시대에서는 공간정보의 국제표준화가 매우 중요한 과제"라며 "이번 국제총회를 통해 한국이 공간정보 국제표준 분야에서 더 나은 발전을 이룰 수 있는 계기가 되기를 기대한다"고 말했다.
-
[특집] ISO/TC 67 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 67 저탄소에너지를 포함한 석유 및 가스 산업(Oil and gas industries including lower carbon energy)와 관련된 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC48, TC51, TC52, TC54, TC58~TC61, TC63과 동일하게 1947년 구성됐다.사무국은 네덜란드표준화기구(Royal Netherlands Standardization Institute, NEN)에서 맡고 있다. 위원회는 프랑수아즈 반 덴 브링크(Mrs Françoise van den Brink)가 책임진다. 의장은 필립 스메들리(Mr Philip Smedley)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 키르시 실란더-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 크리스틴 간손레(Ms Christelle Gansonre) 등으로 조사됐다. 범위는 석유화학 및 저탄소 에너지 활동을 포함한 석유 및 가스 산업 분야의 표준화다.□ 제외 사항▲ISO/TC 28에서 다루는 천연 또는 합성 소스의 석유 및 관련 제품, 연료 및 윤활유와 관련된 측면▲ISO/TC 193에서 다루는 천연 가스 관련 측면▲ISO/TC 197에서 다루는 수소 기술과 관련된 측면▲ISO/TC 255에서 다루는 바이오가스 관련 측면▲ISO/TC 265에서 다루는 이산화탄소 포집, 운송 및 지질학적 저장과 관련된 측면▲IMO 요구 사항(ISO/TC 8)이 적용되는 해양 구조물의 측면현재 ISO/TC 67 사무국의 직접적인 책임하에 발행된 표준은 32개며 ISO/TC 67 사무국과 관련해 발행된 표준은 231개다.ISO/TC 67 사무국의 직접적인 책임하에 개발되고 있는 표준은 4개며 ISO/TC 67 사무국과 관련해 개발되고 있는 표준은 44개다. 참여하고 있는 회원은 34명, 참관 회원은 28명이다.□ ISO/TC 67 사무국의 직접적인 책임하에 발행된 표준 32개 중 15개 목록▲ISO/TS 3250:2021 Petroleum, petrochemical and natural gas industries — Calculation and reporting production efficiency in the operating phase▲ISO/TR 12489:2013 Petroleum, petrochemical and natural gas industries — Reliability modelling and calculation of safety systems▲ISO 13085:2014 Petroleum and natural gas industries — Aluminium alloy pipe for use as tubing for wells▲ISO 13879:1999 Petroleum and natural gas industries — Content and drafting of a functional specification▲ISO 13880:1999 Petroleum and natural gas industries — Content and drafting of a technical specification▲ISO/TR 13881:2000 Petroleum and natural gas industries — Classification and conformity assessment of products, processes and services▲ISO 14224:2016 Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data for equipment▲ISO 15156-1:2020 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials▲ISO 15156-2:2020 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons▲ISO 15156-3:2020 Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys▲ISO 15546:2011 Petroleum and natural gas industries — Aluminium alloy drill pipe▲ISO 15663:2021 Petroleum, petrochemical and natural gas industries — Life cycle costing▲ISO 16961:2015 Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks▲ISO 17348:2016 Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment▲ISO 17349:2016 Petroleum and natural gas industries — Offshore platforms handling streams with high content of CO2 at high pressures□ ISO/TC 67 사무국의 직접적인 책임하에 개발중인 표준 4개 목록▲ISO/DIS 3845 Oil and gas industries including lower carbon energy — Full ring ovalization test method for the evaluation of the cracking resistance of steel line pipe in sour service▲ISO/DIS 16961 Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks▲ISO/DIS 24201 Petroleum, petrochemical and natural gas industries — Bulk material for offshore projects — Tertiary outfitting structures▲ISO/FDIS 24202 Oil and gas industries including lower carbon energy — Bulk material for offshore projects — Monorail beam and padeye□ ISO/TC 61 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 67/SC 2 Pipeline transportation systems ; 발행된 표준 31개, 개발 중인 표준 18개▲ISO/TC 67/SC 3 Drilling and completion fluids, well cements and treatment fluids ; 발행된 표준 28개, 개발 중인 표준 0개▲ISO/TC 67/SC 4 Drilling, production and injection equipment ; 발행된 표준 55개, 개발 중인 표준 2개▲ISO/TC 67/SC 5 Casing, tubing and drill pipe ; 발행된 표준 12개, 개발 중인 표준 2개▲ISO/TC 67/SC 6 Process equipment, piping, systems, and related safety ; 발행된 표준 34개, 개발 중인 표준 5개▲ISO/TC 67/SC 7 Offshore structures ; 발행된 표준 22개, 개발 중인 표준 11개▲ISO/TC 67/SC 8 Arctic operations ; 발행된 표준 6개, 개발 중인 표준 0개▲ISO/TC 67/SC 9 Production, transport and storage facilities for cryogenic liquefied gases ; 발행된 표준 11개, 개발 중인 표준 2개
-
[특집] ISO/TC 63 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 63 유리 용기(Glass containers)와 관련된 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC48, TC51, TC52, TC54, TC58~TC61과 동일하게 1947년 구성됐다.사무국은 영국표준기구(British Standards Institution, BSI)에서 맡고 있다. 위원회는 크리스토퍼 스타(Mr Christopher Starr)가 책임진다. 의장은 조스퀸 페이세르( M Josquin Peycere)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 이사벨 베로니카 넬슨(Ms Isabel Veronica Nelson) 등으로 조사됐다. 범위는 포장 수단으로 사용되는 성형 유리로 만든 유리 용기의 표준화다.현재 ISO/TC 63 사무국과 관련해 발행된 표준은 32개며 참여하고 있는 회원은 10명, 참관 회원은 26명이다.□ ISO/TC 63 사무국의 직접적인 책임하에 발행된 표준 32개 중 15개 목록▲ISO 7348:1992 Glass containers — Manufacture — Vocabulary▲ISO 7458:2004 Glass containers — Internal pressure resistance — Test methods▲ISO 7459:2004 Glass containers — Thermal shock resistance and thermal shock endurance — Test methods▲ISO 8106:2004 Glass containers — Determination of capacity by gravimetric method — Test method▲ISO 8113:2004 Glass containers — Resistance to vertical load — Test method▲ISO 9008:1991 Glass bottles — Verticality — Test method▲ISO 9009:1991 Glass containers — Height and non-parallelism of finish with reference to container base — Test methods▲ISO 9057:1991 Glass containers — 28 mm tamper-evident finish for pressurized liquids — Dimensions▲ISO 9057:1991/Cor 1:2006 Glass containers — 28 mm tamper-evident finish for pressurized liquids — Dimensions — Technical Corrigendum 1▲ISO 9058:2008 Glass containers — Standard tolerances for bottles▲ISO 9100-1:2005 Glass containers — Vacuum lug finishes — Part 1: General▲ISO 9100-2:2005 Glass containers — Vacuum lug finishes — Part 2: 33 medium▲ISO 9100-2:2005/Cor 1:2009 Glass containers — Vacuum lug finishes — Part 2: 33 medium — Technical Corrigendum 1▲ISO 9100-3:2005 Glass containers — Vacuum lug finishes — Part 3: 38 regular▲ISO 9100-3:2005/Cor 1:2009 Glass containers — Vacuum lug finishes — Part 3: 38 regular — Technical Corrigendum 1
-
[특집] ISO/TC 61 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 61 플라스틱(Plastics)과 관련된 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC48, TC51, TC52, TC54, TC58~TC60과 동일하게 1947년 구성됐다.사무국은 중국국가표준화관리위원회(Standardization Administration of China, SAC)에서 맡고 있다. 위원회는 지안동 왕(Mr Jiandong Wang)가 책임진다. 의장은 H.A.A. 옴루(Mr H.A.A. Omloo)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 마르타 카산토산(Mrs Martha Casantosan) 등으로 조사됐다.범위는 중합 접착제, 밀봉, 결합, 용접 등 이에 국한되지 않지만 특히 조립에 의한 (제품의) 가공을 포함해 플라스틱 분야의 명명법, 테스트 방법, 재료 및 제품에 대한 사양의 표준화다.■ 제외 : 고무, 광택제(lacquers)■ 주의 1 : 엘라스토머(elastomers, 탄성중합체)와 관련된 표준은 ISO/TC 45 및 ISO/TC 61에 의해 개발 및 관리된다.■ 주의 2 : 모든 유형의 강화 플라스틱을 포함한 플라스틱 파이프 및 피팅, 밸브, 보조 장치 간 장치·교육을 포함한 결합 기술과 조인트 결과의 특성 평가는 ISO/TC 138에 의해 개발 및 관리된다.현재 ISO/TC 61 사무국과 관련해 발행된 표준은 726개며 ISO/TC 61 사무국과 관련해 개발된 표준은 99개다. 참여하고 있는 회원은 35명, 참관 회원은 38명이다.□ ISO/TC 61 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 61/SC 1 Terminology ; 발행된 표준 9개, 개발 중인 표준 0개▲ISO/TC 61/SC 2 Mechanical behavior ; 발행된 표준 49개, 개발 중인 표준 13개▲ISO/TC 61/SC 4 Burning behaviour ; 발행된 표준 24개, 개발 중인 표준 6개▲ISO/TC 61/SC 5 Physical-chemical properties ; 발행된 표준 87개, 개발 중인 표준 14개▲ISO/TC 61/SC 6 Ageing, chemical and environmental resistance ; 발행된 표준 41개, 개발 중인 표준 9개▲ISO/TC 61/SC 9 Thermoplastic materials ; 발행된 표준 121개, 개발 중인 표준 10개▲ISO/TC 61/SC 10 Cellular plastics ; 발행된 표준 26개, 개발 중인 표준 3개▲ISO/TC 61/SC 11 Products ; 발행된 표준 138개, 개발 중인 표준 8개▲ISO/TC 61/SC 12 Thermosetting materials ; 발행된 표준 88개, 개발 중인 표준 7개▲ISO/TC 61/SC 13 Composites and reinforcement fibres ; 발행된 표준 106개, 개발 중인 표준 15개▲ISO/TC 61/SC 14 Environmental aspects ; 발행된 표준 37개, 개발 중인 표준 14개
-
[특집] ISO/TC 60 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 60 기어(Gears)와 관련된 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC48, TC51, TC52, TC54, TC58, TC59와 동일하게 1947년 구성됐다.사무국은 미국표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 아미르 아바탈레브(Mr Amir Aboutaleb)가 책임진다. 의장은 테란스 클라베스(Mr Terrance Klaves)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 츄안유 쏘우(Ms Chuanyu Zou), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다. 범위는 제조 및 제어를 위한 용어, 공칭 치수, 공차 및 도구를 포함한 기어 분야의 표준화다.현재 ISO/TC 60 사무국의 직접적인 책임하에 있는 발행된 표준은 21개며 ISO/TC 60 사무국과 관련해 발행된 표준은 61개다.ISO/TC 60 사무국의 직접적인 책임하에 개발 중인 표준은 3개며 ISO/TC 60 사무국과 관련해 개발 중인 표준은 14개다. 참여하고 있는 회원은 14명, 참관 회원은 21명이다.□ ISO/TC 60 사무국의 직접 책임하에 발행된 표준 21개 중 15개 목록▲ISO 53:1998 Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile▲ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering — Modules▲ISO 677:1976 Straight bevel gears for general engineering and heavy engineering — Basic rack▲ISO 678:1976 Straight bevel gears for general engineering and heavy engineering — Modules and diametral pitches▲ISO 1328-1:2013 Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth▲ISO 1328-2:2020 Cylindrical gears — ISO system of flank tolerance classification — Part 2: Definitions and allowable values of double flank radial composite deviations▲ISO 8579-1:2002 Acceptance code for gear units — Part 1: Test code for airborne sound▲ISO/TR 10064-1:2019 Code of inspection practice — Part 1: Measurement of cylindrical gear tooth flanks▲ISO/TR 10064-2:1996 Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash▲ISO/TR 10064-2:1996/Cor 1:2001 Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash — Technical Corrigendum 1▲ISO/TR 10064-2:1996/Cor 2:2006 Code of inspection practice — Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash — Technical Corrigendum 2▲ISO/TR 10064-3:1996 Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes▲ISO/TR 10064-3:1996/Cor 1:2006 Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes — Technical Corrigendum 1▲ISO/TR 10064-4:1998 Code of inspection practice — Part 4: Recommendations relative to surface texture and tooth contact pattern checking▲ISO/TR 10064-4:1998/Cor 1:2006 Code of inspection practice — Part 4: Recommendations relative to surface texture and tooth contact pattern checking — Technical Corrigendum 1□ ISO/TC 60 사무국의 직접 책임하에 개발 중인 표준 3개 목록▲ISO/CD TR 10064-2.2 Code of inspection practice — Part 2: Double Flank Radial Composite Measurements▲ISO/CD 21771-2 Cylindrical involute gears and gear pairs — Part 2 — Part 2: Calculation and Measurement of Tooth Thickness and Backlash▲IEC/CD 61400-4 Wind turbines — Part 4: Design requirements for wind turbine gearboxes□ ISO/TC 60 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 60/SC 1 Nomenclature and wormgearing ; 발행된 표준 12개, 개발 중인 표준 2개▲ISO/TC 60/SC 2 Gear capacity calculation ; 발행된 표준 28개, 개발 중인 표준 9개
-
[특집] ISO/TC 59 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 59 건축 및 토목공사(Buildings and civil engineering works)와 관련된 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC48, TC51, TC52, TC54, TC58과 동일하게 1947년 구성됐다.사무국은 노르웨이표준기구(Standards Norway, SN)에서 맡고 있다. 위원회는 헤게 숄리(Ms Hege Sjølie)이 책임진다. 의장은 욘스 쇼그렌(Mr Jøns Sjøgren)으로 임기는 2027년까지다.ISO 기술 프로그램 관리자는 앤 캐서린 로(Dr Anna Caterina Rossi), ISO 편집 관리자는 이본 헨(Mrs Yvonne Chen) 등으로 조사됐다. 범위는 아래 내용을 포함하는 건축 및 토목공사 분야의 표준화다.■ 포함 내용 : ▶일반 용어▶설계, 제조 및 건설 과정에서 정보 구성▶모듈 조정 및 기본 원칙, 조인트·공차 및 맞춤에 대한 일반 규칙, 실런트에 대한 성능 및 테스트 표준 등을 포함한 건물, 건물 요소 및 구성 요소에 대한 일반적인 기하학적 요구 사항▶서비스 수명, 지속 가능성, 접근성 및 유용성과 관련된 기능 및 사용자 요구 사항을 포함한 기타 성능 요구 사항에 대한 일반 규칙▶경제적, 환경적, 사회적 영향 및 지속 가능한 개발과 관련된 측면을 다루기 위한 일반 규칙 및 지침▶별도의 ISO 기술 위원회 범위에 속하지 않는 구성 요소에 대한 형상 및 성능 요구 사항▶조달 프로세스, 방법 및 절차 등이다.■ 제외 내용 : ▶기술 제품 문서의 표준화 및 조정(ISO/TC 10)▶음향 요구 사항(ISO / TC 43)▶콘크리트 구조물 설계를 위한 기초(ISO/TC 71/SC 4)▶건축 자재, 구성 요소 및 구조와 관련된 화재 테스트 및 화재 안전 공학(ISO/TC 92)▶구조물 설계의 기초(ISO / TC 98)▶건설 기계(ISO/TC 127 및 ISO/TC 195)▶건물 유리에 대한 성능 요구 사항(ISO/TC 160)▶문, 문틀 및 창문에 대한 성능 요구 사항(ISO/TC 162)▶열적 특성 계산(ISO / TC 163)▶목재 구조물 설계를 위한 기초(ISO/TC 165)▶강철 및 알루미늄 구조의 설계 기반(ISO/TC 167)▶지질 공학 측면 및 토양 품질(ISO/TC 182 및 ISO/TC 190)▶수용 가능한 실내 환경 및 실용적인 에너지 사용에 관한 설계 및 개조 건물의 표준화(ISO/TC 205) 등이다.현재 ISO/TC 59 사무국의 직접적인 책임하에 있는 발행된 표준은 23개며 ISO/TC 59 사무국과 관련해 발행된 표준은 135개다.ISO/TC 59 사무국의 직접적인 책임하에 개발 중인 표준은 3개며 ISO/TC 59 사무국과 관련해 개발 중인 표준은 19개다. 참여하고 있는 회원은 26명, 참관 회원은 54명이다.□ ISO/TC 58 사무국의 직접 책임하에 발행된 표준 11개 목록▲ISO 3443-1:1979 Tolerances for building — Part 1: Basic principles for evaluation and specification▲ISO 3443-2:1979 Tolerances for building — Part 2: Statistical basis for predicting fit between components having a normal distribution of sizes▲ISO 3443-3:1987 Tolerances for building — Part 3: Procedures for selecting target size and predicting fit▲ISO 3443-4:1986 Tolerances for building — Part 4: Method for predicting deviations of assemblies and for allocation of tolerances▲ISO 3443-5:1982 Building construction — Tolerances for building — Part 5: Series of values to be used for specification of tolerances▲ISO 3443-6:1986 Tolerances for building — Part 6: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control — Method 1▲ISO 3443-7:1988 Tolerances for building — Part 7: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control — Method 2 (Statistical control method)▲ISO 3443-8:1989 Tolerances for building — Part 8: Dimensional inspection and control of construction work▲ISO 4463-1:1989 Measurement methods for building — Setting-out and measurement — Part 1: Planning and organization, measuring procedures, acceptance criteria▲ISO 4463-2:1995 Measurement methods for building — Setting-out and measurement — Part 2: Measuring stations and targets▲ISO 4463-3:1995 Measurement methods for building — Setting-out and measurement — Part 3: Check-lists for the procurement of surveys and measurement services▲ISO 6589:1983 Joints in building — Laboratory method of test for air permeability of joints▲ISO 7077:1981 Measuring methods for building — General principles and procedures for the verification of dimensional compliance▲ISO 7737:1986 Tolerances for building — Presentation of dimensional accuracy data▲ISO 7844:1985 Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels — Laboratory mechanical tests — Effect of tangential loading□ ISO/TC 5 사무국의 직접 책임하에 개발 중인 표준 3개 목록▲ISO/CD 4931-1 Buildings and civil engineering works — Principles, framework and guidance for resilience design — Part 1: Adaptation to climate change▲ISO/TR 5202 Buildings and civil engineering works — Building resilience strategies related to public health emergencies — Compilation of relevant information▲ISO/AWI TR 18961 Buildings and civil engineering works – Seismic resilience assessment and strategies – Compilation of relevant information□ ISO/TC 45 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 59/SC 2 Terminology and harmonization of languages ; 발행된 표준 5개, 개발 중인 표준 0개▲ISO/TC 59/SC 8 Sealants ; 발행된 표준 38개, 개발 중인 표준 2개▲ISO/TC 59/SC 13 Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) ; 발행된 표준 21개, 개발 중인 표준 8개▲ISO/TC 59/SC 14 Design life ; 발행된 표준 10개, 개발 중인 표준 3개▲ISO/TC 59/SC 15 Framework for the description of housing performance ; 발행된 표준 5개, 개발 중인 표준 0개▲ISO/TC 59/SC 16 Accessibility and usability of the built environment ; 발행된 표준 1개, 개발 중인 표준 1개▲ISO/TC 59/SC 17 Sustainability in buildings and civil engineering works ; 발행된 표준 13개, 개발 중인 표준 1개▲ISO/TC 59/SC 18 Construction procurement ; 발행된 표준 9개, 개발 중인 표준 1개▲ISO/TC 59/SC 19 Prefabricated building ; 발행된 표준 10개, 개발 중인 표준 0개