검색결과
-
[특집] ISO/TC 14 기술위원회(Technical Committees) 소개▲독일표준기구(Deutsches Institut für Normung e.V., DIN) 건물 [출처=위키피디아] 스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 14 기계 및 부속품용 샤프트(Shafts for machinery and accessories) 관련 기술위원회 역시 TC1, TC2, TC4, TC5, TC6, TC8, TC 10, TC11, TC12와 같이 1947년 구성됐다. 사무국은 독일표준기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 더크 아놀드(Mr Dirk Arnold)가 책임지고 있으며 의장은 베이컨트(vacant)이다. ISO 기술 프로그램 관리자는 메르세 페레스 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등이다.범위는 기계용 샤프트, 키 및 키홈, 스플라인, 세레이션, 커플링·플랜지 등과 같은 액세서리 분야의 표준화이다. 현재 ISO/TC 14의 직접적인 책임하에 발행된 표준은 4개며 참여하고 있는 회원은 6명, 참관 회원은 21명이다.□ ISO/TC 14 사무국의 직접적인 책임하에 발행된 ISO 표준 4개 목록▲ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering — Dimensions, tolerances and verification▲ISO 4156-1:2021 Straight cylindrical involute splines — Metric module, side fit — Part 1: Generalities▲ISO 4156-2:2021 Straight cylindrical involute splines — Metric module, side fit — Part 2: Dimensions▲ISO 4156-3:2021 Straight cylindrical involute splines — Metric module, side fit — Part 3: Inspection□ ISO/TC 14의 문서에 접근할 수 있는 위원회 목록▲ISO/TC 39 Machine tools ISO▲ISO/TC 60 Gears ISO▲ISO/TC 123 Plain bearings ISO□ ISO/TC 14가 접근할 수 있는 문서를 가진 위원회 목록▲ISO/TC 22 Road vehicles ISO▲ISO/TC 123 Plain bearings ISO▲ISO/TC 67 Oil and gas industries including lower carbon energy ISO▲ISO/TC 10/SC 6 Mechanical engineering documentation ISO▲ISO/TC 39 Machine tools ISO▲ISO/TC 20 Aircraft and space vehicles ISO
-
[특집] ISO/TC 12 기술위원회(Technical Committees) 소개▲스웨덴표준기구(Swedish Institute for Standards, SIS) [출처=홈페이지] 스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 12 수량 및 단위(Quantities and units) 관련 기술위원회 역시 TC1, TC2, TC4, TC5, TC6, TC8, TC10, TC11과 같이 1947년 구성됐다. 사무국은 스웨덴표준기구(Swedish Institute for Standards, SIS)에서 맡고 있다.위원회는스벤 라데(Mr Sven Radhe)가 책임지고 있으며 의장은 토르그니 칼슨 박사(Dr Torgny Carlsson)로 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 메르세 페레스 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 빈센트 바추키(M Vincenzo Bazzucchi) 등이다.범위는 다양한 과학과 기술 분야에 사용되는 수량 및 단위, 수학 기술에 대한 단위 및 기호의 표준화이다. 또한 필요한 경우 이러한 수량 및 단위의 정의에 대해 제공하고 다양한 단위 사이의 환산 계수의 표준화도 포함된다.현재 ISO/TC 12의 직접적인 책임하에 발행된 표준은 13개며 ISO/TC 12의 직접적인 책임하에 개발중인 표준은 3개다. ISO/TC 12에 참여하고 있는 회원은 20명, 참관 회원은 35명이다. □ ISO/TC 11 사무국의 직접적인 책임하에 발행된 ISO 표준 13개 목록▲ISO 80000-1:2022 Quantities and units — Part 1: General▲ISO 80000-2:2019 Quantities and units — Part 2: Mathematics▲ISO 80000-3:2019 Quantities and units — Part 3: Space and time▲ISO 80000-4:2019 Quantities and units — Part 4: Mechanics▲ISO 80000-5:2019 Quantities and units — Part 5: Thermodynamics▲IEC 80000-6:2022 Quantities and units — Part 6: Electromagnetism▲ISO 80000-7:2019 Quantities and units — Part 7: Light and radiation▲ISO 80000-8:2020 Quantities and units — Part 8: Acoustics▲ISO 80000-9:2019 Quantities and units — Part 9: Physical chemistry and molecular physics▲ISO 80000-10:2019 Quantities and units — Part 10: Atomic and nuclear physics▲ISO 80000-11:2019 Quantities and units — Part 11: Characteristic numbers▲ISO 80000-12:2019 Quantities and units — Part 12: Condensed matter physics▲IEC 80000-13:2008 Quantities and units — Part 13: Information science and technology□ ISO/TC 11 사무국의 직접적인 책임하에 개발중인 ISO 표준 3개 목록▲IEC/CD 80000-15 Quantities and units — Part 15: Logarithmic and related quantities▲IEC/CD 80000-16 Quantities and units — Part 16: Printing and writing rules▲IEC/CD 80000-17 Quantities and units — Part 17: Time dependency
-
[특집] ISO/TC 11 기술위원회(Technical Committees) 소개▲중국 국가표준화관리위원회(Standardization Administration of China, SAC) [출처=영문홈페이지] 스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 11 보일러 및 압력 용기(Boilers and pressure vessels) 관련 기술위원회 역시 TC1, TC2, TC4, TC5, TC6, TC8, T10과 같이 1947년 구성됐다. 사무국은 중국 국가표준화관리위원회(Standardization Administration of China, SAC)에서 맡고 있다.위원회는 샨샨 사오(Ms Shanshan Shao)가 책임지고 있으며 의장은 바이난 소우 교수(Prof Bi'nan Shou)로 임기는 2027년 말까지다. ISO 기술 프로그램 관리자는 블랜딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등이다.범위는 보일러 및 압력 용기의 구조 표준화이다. 단 구조란 설계, 재료, 가공, 검사, 점검, 시험 및 적합성 평가 등을 포함하는 포괄적 용어다.ISO/TC 11 보일러 및 압력 용기 범위에서 제외되는 항목은 △ISO/TC 8이 적용되는 철도 및 해양 보일러 △ISO/TC 58이 적용되는 가스 실린더 △ISO/TC 20이 적용되는 항공기 및 차량 부품 등이다.또한 △ISO/TC 21이 적용되는 소방용 장비 △ISO/TC 94가 적용되는 개인 안전 장비 △회전 또는 왕복 장치의 부품 △ISO/TC 85가 적용되는 원자력 압력 장비 △배관 시스템 △ISO/TC 220이 적용되는 극저온 용기 등도 포함된다.현재 ISO/TC 11의 직접적인 책임하에 발행된 표준은 2개며 참여하고 있는 회원은 25명, 참관 회원은 31명이다. 기술위원회는 다음 표준 개발을 위해 대기 중이다.□ ISO/TC 11 사무국의 직접적인 책임하에 발행된 ISO 표준 2개 목록▲ISO 16528-1:2007 Boilers and pressure vessels — Part 1: Performance requirements▲ISO 16528-2:2007 Boilers and pressure vessels — Part 2: Procedures for fulfilling the requirements of ISO 16528-1□ ISO/TC 11 문서에 접근할 수 있는 위원회 목록▲ IEC/TC 5 Steam turbines IEC▲ISO/TC 5 Ferrous metal pipes and metallic fittings ISO▲ISO/TC 17 Steel ISO▲ISO/TC 21 Equipment for fire protection and fire fighting ISO▲ISO/TC 58 Gas cylinders ISO▲ISO/TC 135 Non-destructive testing ISO▲ISO/TC 197 Hydrogen technologies ISO□ ISO/TC 11이 문서에 접근할 수 있는 위원회 목록▲ISO/TC 5 Ferrous metal pipes and metallic fittings ISO▲ISO/TC 5/SC 1 Steel tubes ISO▲ISO/TC 17 Steel ISO▲ISO/TC 21 Equipment for fire protection and fire fighting ISO▲ISO/TC 44 Welding and allied processes ISO▲ISO/TC 58 Gas cylinders ISO▲ISO/TC 135 Non-destructive testing ISO▲ISO/TC 153 Valves ISO▲ISO/TC 192 Gas turbines ISO▲ISO/TC 197 Hydrogen technologies ISO▲ISO/TC 220 Cryogenic vessels ISO
-
[특집] ISO/TC 10 기술위원회(Technical Committees) 소개▲스웨덴표준기구(Swedish Institute for Standards, SIS) [출처=홈페이지] 스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 10 기술제품 문서화(Technical product documentation) 관련 기술위원회 역시 TC1, TC2, TC4, TC5, TC6, TC8과 같이 1947년 구성됐다. 사무국은 스웨덴표준기구(Swedish Institute for Standards, SIS)에서 맡고 있다.위원회는 스번 라데(Mr Sven Radhe)가 책임지고 있으며 의장은 리차드 린드퀴스트(Mr Richard Lindqvist)로 임기는 2022년 말까지다. ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 데이비드 리드(Mr David Reid) 등이다.범위는 기술 도면, 모델 기반(3D), 컴퓨터기반(2D) 또는 준비, 관리, 보관, 검색, 복제, 교환 및 사용을 용이하게 하기 위해 제품 수명 주기 전반에 걸쳐 기술적인 목적으로 수동으로 생산된 것을 포함한다. 기술제품 문서화(TPD)의 조정 및 표준화도 해당된다.현재 기술위원회(TC)와 분과위원회(SC)와 관련해 발행된 ISO 표준은 144개다. 이 중 ISO/TC 10의 직접적인 책임하에 발행된 표준은 39개다.기술위원회와 분과위원회가 개발 중에 있는 ISO 표준은 16개며 ISO/TC 10의 직접적인 책임하에 개발 중인 표준은 3개다. 참여하고 있는 회원은 17명, 참관 회원은 38명이다.□ ISO/TC 10 사무국의 직접적인 책임하에 발행된 ISO 표준 39개 20개의 목록▲ISO 128-1:2020 Technical product documentation (TPD) — General principles of representation — Part 1: Introduction and fundamental requirements▲ISO 128-2:2022 Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for lines▲ISO 128-3:2022 Technical product documentation (TPD) — General principles of representation — Part 3: Views, sections and cuts▲ISO 128-100:2020 Technical product documentation — General principles of representation — Part 100: Index▲ISO 129-1:2018 Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles▲ISO 129-1:2018/Amd 1:2020 Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles — Amendment 1▲ISO 8887-1:2017 Technical product documentation — Design for manufacturing, assembling, disassembling and end-of-life processing — Part 1: General concepts and requirements▲ISO 9175-1:1988 Tubular tips for hand-held technical pens using India ink on tracing paper — Part 1: Definitions, dimensions, designation and marking▲ISO 9177-1:2016 Mechanical pencils for technical drawings — Part 1: Classification, dimensions, performance requirements and testing▲ISO 9177-2:2022 Mechanical pencils for technical drawings — Part 2: Black leads — Classification and dimensions▲ISO 9177-3:2022 Mechanical pencils for technical drawings — Part 3: Black leads — Bending strengths of HB leads▲ISO 9180:1988 Black leads for wood-cased pencils — Classification and diameters▲ISO 9957-1:1992 Fluid draughting media — Part 1: Water-based India ink — Requirements and test conditions▲ISO 9957-2:2019 Fluid draughting media — Part 2: Water-based non-India ink — Requirements and test conditions▲ISO 9957-3:1997 Fluid draughting media — Part 3: Water-based coloured draughting inks — Requirements and test conditions▲ISO 9958-1:1992 Draughting media for technical drawings — Draughting film with polyester base — Part 1: Requirements and marking▲ISO 9958-2:1992 Draughting media for technical drawings — Draughting film with polyester base — Part 2: Determination of properties▲ISO 9959-1:1992 Numerically controlled draughting machines — Drawing test for the evaluation of performance — Part 1: Vector plotters▲ISO 9960-1:1992 Draughting instruments with or without graduation — Part 1: Draughting scale rules▲ISO 9961:1992 Draughting media for technical drawings — Natural tracing paper□ ISO/TC 10 사무국의 직접적인 책임하에 개발중인 ISO 표준 3개 목록▲ISO/FDIS 8887-2 Technical product documentation — Design for manufacturing, assembling, disassembling and end-of-life processing — Part 2: Vocabulary▲ISO/AWI 8887-3 Technical product documentation — Design for manufacturing, assembling, disassembling and end-of-life processing — Part 3: Selection of an appropriate end-of-life design strategy▲IEC/CD 81355-1 Classification and designation of documents for plants, systems and equipment — Part 1: Rules and classification tables
-
[스위스] 국제전기기술위원회(IEC), 2022년 5G 네트워크 최신 테스트 방법에 관한 새로운 표준 IEC/IEEE 63195 발표 예정스위스 제네바에 본사를 두고 있는 국제전기기술위원회(IEC)에 따르면 2022년 5G 네트워크에 대한 최신 테스트 방법에 관한 새로운 표준 IEC/IEEE 63195의 최종본을 발표할 예정이다.새로운 표준에는 5G 네트워크의 빔포밍, 실제 전력 평가, 최신 테스트 및 모니터링 방법을 보여주는 사례 연구 등이 포함된다.IEC TC(Technical Committee) 106과 IEEE 전문가들은 6GHz – 300GHz의 주파수에 대한 계산 및 측정을 다루는 IEC 및 IEEE 시리즈의 새로운 테스트 방법에 대한 최종 국제표준(FDIS) 초안 IEC/IEEE 63195을 발표했다.초안은 2021년 현재 해결되고 있는 몇 가지 매우 중요한 기술 피드백과 함께 100% 찬성표를 얻었다. 2022년 최종 발표를 앞두고 있다.TC 106 및 IEEE의 핵심 전략은 5G를 위한 테스트 방법 개발에서 앞서 나가는 것으로 2018년 처음으로 mmWave 장치 테스트 기술 보고서를 작성했다.또한 IEC는 학계, 산업계, 정부, 시험소 등 협력을 통해 5G 기지국 주변 EMF 수준의 전자기장 평가를 위한 최신 기술 표준 IEC 62232 Edition 3도 마무리하고 있다.현재 수많은 국가에서 새로운 5G mmWave 스펙트럼을 사용할 수 있다. 새로운 5G 장치가 전 세계적으로 출시되는 가운데 표준이 최종 개발됐다.
-
[특집] ISO/TC 8 기술위원회(Technical Committees) 소개▲중국 국가표준화관리위원회(Standardization Administration of China, SAC) [출처=홈페이지] 스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 8 선박 및 해양 기술(Ships and marine technology) 관련 기술위원회 역시 TC1, TC2, TC4, TC5, T6와 같이 1947년 구성됐다. 사무국은 중국 국가표준화관리위원회(Standardization Administration of China, SAC)에서 맡고 있다.위원회는 징 왕(Ms Jing Wang)이 책임지고 있으며 의장은 옌칭 리(Mr Yanqing Li)로 임기는 2024년까지다. ISO 기술 프로그램 관리자는 메르세 페레스 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 이사벨 베로니카 넬슨(Ms Isabel Veronica Nelson) 등이다.범위는 선박 건조나 내륙 항행용 선박, 해양 구조물, 선박 육상 인터페이스, 선박 운영, IMO 요구 사항이 적용되는 해양 구조물, 바다 관찰 및 탐사 등을 구성하는데 사용되는 설계, 건설, 교육, 구조 요소, 항해 준비 부품, 장비, 방법, 기술, 해양 환경 문제 등에 관한 표준화이다. 다만 아래 사항은 제외된다.▲선박 및 해양 구조물의 전기 및 전자 장비와 관련된 IEC/TC 18 및 IEC/TC 80▲내연 기관과 연관된 ISO/TC 70▲석유 및 천연 가스 산업을 위한 이동식 해양 시추, 수용 장치의 현장별 적용 평가 절차를 포함한 석유 및 천연 가스 산업을 위한 해양 구조물과 관련된 ISO/TC 67/SC 7▲강철 및 알루미늄 구조와 연관된 ISO/TC 167▲전체 길이가 24미터 미만인 레크리에이션 선박 및 기타 소형 선박(구명정 및 구명 장비 제외)의 장비와 구조 세부 사항과 관련된 ISO/TC 188▲해저 채광▲선박 및 파이프/스틸와이어 로프 등과 같은 해양 구조물에서 사용하도록 특정하지 않고 정기적인 상호 연락을 유지해야 하는 특정 ISO 기술 위원회의 범위에 속하는 장비 등.현재 기술위원회(TC)와 분과위원회(SC)와 관련해 발행된 ISO 표준은 404개다. 이 중 ISO/TC 8의 직접적인 책임하에 발행된 표준은 27개다.기술위원회와 분과위원회가 개발 중에 있는 ISO 표준은 84개며 ISO/TC 8의 직접적인 책임하에 개발 중인 표준은 16개다. 참여하고 있는 회원은 27명, 참관 회원은 22명이다.□ ISO/TC 8 사무국의 직접적인 책임하에 발행된 ISO 표준 27개 목록▲ISO 11711-1:2019 Ships and marine technology — Aquatic nuisance species — Part 1: Ballast water discharge sample port▲ISO 11711-2:2022 Ships and marine technology — Aquatic nuisance species — Part 2: Ballast water sample collection and handling▲ISO 15849:2001 Ships and marine technology — Guidelines for implementation of a fleet management system network▲ISO 15849:2001/Amd 1:2003 Ships and marine technology — Guidelines for implementation of a fleet management system network — Amendment 1▲ISO 20519:2021 Ships and marine technology — Specification for bunkering of liquefied natural gas fuelled vessels▲ISO 20661:2020 Ships and marine technology — Cutter suction dredger supervisory and control systems▲ISO 20662:2020 Ships and marine technology — Hopper dredger supervisory and control systems▲ISO 20663:2020 Ships and marine technology — Grab dredger supervisory and control systems▲ISO 21593:2019 Ships and marine technology — Technical requirements for dry-disconnect/connect couplings for bunkering liquefied natural gas▲ISO 22547:2021 Ships and marine technology — Performance test procedures for high-pressure pumps in LNG fuel gas supply systems (FGSS) for ships▲ISO 22548:2021 Ships and marine technology — Performance test procedures for LNG fuel gas supply systems (FGSS) for ships▲ISO 23152:2021 Ships and marine technology — Ballast water management systems (BWMS) — Computational physical modelling and calculations on scaling of UV reactors▲ISO 23314-2:2021 Ships and marine technology — Ballast water management systems (BWMS) — Part 2: Risk assessment and risk reduction of BWMS using electrolytic methods▲ISO 23806:2022 Ships and marine technology — Cyber safety▲ISO/TS 23860:2022 Ships and marine technology — Vocabulary related to autonomous ship systems▲ISO/PAS 24438:2020 Ships and marine technology — Maritime education and training — Maritime career guidance▲ISO 28004-2:2014 Security management systems for the supply chain — Guidelines for the implementation of ISO 28000 — Part 2: Guidelines for adopting ISO 28000 for use in medium and small seaport operations▲ISO 28007-1:2015 Ships and marine technology — Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) — Part 1: General▲ISO 29400:2020 Ships and marine technology — Offshore wind energy — Port and marine operations▲ISO 29404:2015 Ships and marine technology — Offshore wind energy — Supply chain information flow▲ISO 30000:2009 Ships and marine technology — Ship recycling management systems — Specifications for management systems for safe and environmentally sound ship recycling facilities▲ISO 30002:2012 Ships and marine technology — Ship recycling management systems — Guidelines for selection of ship recyclers (and pro forma contract)▲ISO 30003:2009 Ships and marine technology — Ship recycling management systems — Requirements for bodies providing audit and certification of ship recycling management▲ISO 30004:2012 Ships and marine technology — Ship recycling management systems — Guidelines for the implementation of ISO 30000▲ISO 30005:2012 Ships and marine technology — Ship recycling management systems — Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations▲ISO 30006:2010 Ship recycling management systems — Diagrams to show the location of hazardous materials onboard ships▲ISO 30007:2010 Ships and marine technology — Measures to prevent asbestos emission and exposure during ship recycling □ ISO/TC 8 사무국의 직접적인 책임하에 개발중인 ISO 표준 16개 목록▲ISO/DIS 3725 Ships and marine technology — Aquatic nuisance species — Methods for evaluating the performance of compliance monitoring devices for ballast water discharges▲ISO/CD 4891 Ships and marine technology — Navigation and ship operations — Smart logbooks for shipping▲ISO/AWI 7613 Ships and marine technology — Hopper dredger — Trailing suction tube position monitoring system▲ISO/AWI 8933-1 Ships and marine technology — Energy efficiency — Part 1: Energy efficiency of individual maritime components▲ISO/AWI 8933-2 Ships and marine technology — Energy efficiency — Part 2: Energy efficiency of maritime functional units▲ISO/AWI 11711-3 Ships and marine technology — Aquatic nuisance species — Part 3: Analyses of ballast water samples▲ISO/AWI 16259 Ships and marine technology — Performance test procedures of LNG BOG re-liquefaction system on board a ship▲ISO/AWI 18131 Ships and marine technology — General requirements for publish-subscribe architecture on ship-shore data communication▲ISO/FDIS 23780-1Ships and marine technology — Procedure for testing the performance of continuous monitoring TRO sensors used in ships — Part 1: DPD sensors▲ISO/CD 23799 Ships and marine technology — Assessment of onboard cyber safety▲ISO/PRF 23807 Ships and marine technology — General requirements for the asynchronous time-insensitive ship-shore data transmission▲ISO/AWI 23816 Ships and marine technology — Secured ship network based on IPv6 Ethernet network▲ISO/DIS 24438 Ships and marine technology — Maritime education and training — Maritime career guidance▲ISO/AWI 24439 Ships and marine technology — Empowering women in maritime industry▲ISO/AWI 24440 Ships and marine technology — Maritime education and training — Crew training for alternative fuel ships▲ISO/CD 30005 Ships and marine technology — Ship recycling management — Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations
-
[특집] ISO/TC 6 기술위원회(Technical Committees) 소개▲캐나다표준위원회(Standards Council of Canada, SCC) [출처=홈페이지] 스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 6 종이, 보드, 펄프(Paper, board and pulps) 관련 기술위원회 역시 TC1, TC2, TC4, TC5와 같이 1947년 구성됐다. 사무국은 캐나다표준위원회(Standards Council of Canada, SCC)에서 맡고 있다.위원회는제이콥 지글러(Dr Jacob Ziegler)가 책임지고 있으며 의장은 라이언 코미어(Dr Lyne Cormier)로 임기는 올해 말까지다. ISO 기술 프로그램 관리자는 마메 마호 타카하시(Mme Maho Takahashi), ISO 편집 관리자는 크리스틴 간솔레(Ms Christelle Gansonre) 등이다.범위는 용어, 샘플링 절차, 테스트 방법, 제품 및 품질 사양, 적절한 보정 시스템의 구축 및 유지 등을 포함해 종이, 보드 펄프 셀룰로오스 나노물질, 리그닌 분야의 표준화다.여기에 재활용된 재료의 모든 부분 또는 재활용을 위한 재료 등을 포함하는 종이, 펄프, 보드 제품 뿐만 아니라 모든 종류의 종이, 펄프, 보드가 해당된다.다만 연락을 유지해야 되는 ISO/TC 42, 46, 122, 130, 154와 같은 특정 기술위원회의 범위에 속하는 문제는 제외된다.현재 기술위원회(TC)와 분과위원회(SC)와 관련해 발행된 ISO 표준은 199개다. 이 중 ISO/TC 6의 직접적인 책임하에 발행된 표준은 112개다.기술위원회와 분과위원회가 개발 중에 있는 ISO 표준은 25개며 ISO/TC 6의 직접적인 책임하에 개발 중인 표준은 14개다. 참여하고 있는 회원은 29명, 참관 회원은 30명이다.□ ISO/TC 6 사무국의 직접적인 책임하에 발행된 ISO 표준 112개 일부 목록▲ISO 216:2007 Writing paper and certain classes of printed matter — Trimmed sizes — A and B series, and indication of machine direction▲ISO 217:2013 Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction▲ISO 302:2015 Pulps — Determination of Kappa number▲ISO 638-1:2022 Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method — Part 1: Materials in solid form▲ISO 638-2:2022 Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method — Part 2: Suspensions of cellulosic nanomaterials▲ISO 692:1982 Pulps — Determination of alkali solubility▲ISO 699:2015 Pulps — Determination of alkali resistance▲ISO 776:2011 Pulps — Determination of acid-insoluble ash▲ISO 801-1:1994 Pulps — Determination of saleable mass in lots — Part 1: Pulp baled in sheet form▲ISO 801-2:1994 Pulps — Determination of saleable mass in lots — Part 2: Pulps (such as flash-dried pulps) baled in slabs▲ISO 801-3:1994 Pulps — Determination of saleable mass in lots — Part 3: Unitized bales▲ISO 838:1974 Paper — Holes for general filing purposes — Specifications▲ISO 1762:2019 Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 525 °C▲ISO 2144:2019 Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 900 °C▲ISO 2469:2014 Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)▲ISO 2470-1:2016 Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)□ ISO/TC 6 사무국의 직접적인 책임하에 개발중인 ISO 표준 14개 목록▲ISO/DIS 2469 Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)▲ISO 3688 Pulps — Preparation of laboratory sheets for the measurement of optical properties▲ISO/AWI 4989 Cellulose Nanomaterial (CNM) — Sample Preparation of Pressed CNM Powder for Determination of Optical Properties — ISO Brightness and L*a*b* Colour▲ISO/FDIS 5263-3 Pulps — Laboratory wet disintegration — Part 3: Disintegration of mechanical pulps at ≥85°C▲ISO/WD 5267-2 Pulps — Determination of drainability — Part 2: "Canadian Standard" freeness method▲ISO/DIS 6350 Lignins — Determination of dry matter content — Oven-drying and freeze-drying methods▲ISO/PRF 9184-1 Paper, board and pulps — Fibre furnish analysis — Part 1: General method▲ISO/DIS 9795 Lignins — Determination of inorganics content in kraft lignin, soda lignin and hydrolysis lignin▲ISO/CD TS 11371 Pulps — Guidelines for laboratory refining▲ISO/AWI 12507 Paper and Pulp — Deinkability test for printed paper mixtures containing woodfree printed paper▲ISO/CD 15360-3 Recycled pulps — Estimation of Stickies and Plastics — Part 3: Determination by applying near-infrared measurement▲ISO/FDIS 23772 Pulps — Kraft liquor — Determination of residual alkali using potentiometric titration▲ISO/FDIS 23774 Pulps — Kraft liquor — Determination of total, active and effective alkali using potentiometric titration▲ISO/FDIS 23777 Pulps — Kraft liquor — Determination of hydrosulphide ion concentration using potentiometric titration□ ISO/TC 6 분과위원회(Sub committee)와 관련된 ISO 표준 10개 목록▲ISO/TC 6/SC 2 Test methods and quality specifications for paper and board▲ISO/TC 6/CAG Chair’s Advisory Group▲ISO/TC 6/TG 1 Cellulosic Nanomaterials▲ISO/TC 6/TG 2 Identification of Organizations - Environmental issues▲ISO/TC 6/WG 3 Optical properties▲ISO/TC 6/WG 7 Cores for reels of paper▲ISO/TC 6/WG 14 Recycling▲ISO/TC 6/WG 15 Pulp Methods▲ISO/TC 6/WG 16 Lignin Analyses▲ISO/TC 6/WG 17 Kraft Liquor Analyses
-
[특집] ISO/TC 5 기술위원회(Technical Committees) 소개▲중국 국가표준화관리위원회(Standardization Administration of China, SAC) [출처=홈페이지] 스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 5 철금속 파이프 및 금속 피팅(Ferrous metal pipes and metallic fittings) 관련 기술위원회 역시 TC1, TC2, TC4와 같이 1947년 구성됐다. 사무국은 중국 국가표준화관리위원회(Standardization Administration of China, SAC)에서 맡고 있다.위원회는후이닝 호우(Ms Huining HOU)가 책임지고 있으며 의장은 지에 호우(Mrs Jie Hou)로 임기는 2024년까지다. ISO 기술 프로그램 관리자는 츄안유 조우(Ms Chuanyu Zou), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등이다.범위는 강철 튜브, 주철 파이프, 유연한 금속 튜브, 금속 피팅, 플랜지, 파이프 지지대, 파이프 나사 및 게이지, 금속 및 유기 코팅/보호 분야의 표준화다.다만 튜브용 강재에 관한 ISO / TC 17, 항공기 파이프에 관한 ISO / TC 20, 튜브 및 장비(플랜지 제외) 파이프 나사 및 석유 및 천연 가스 산업 분야의 측정에 관한 ISO / TC 67, 유체 동력 시스템용 연결부에 관한 ISO / TC 131 등은 제외되다.현재 기술위원회(TC)와 분과위원회(SC)와 관련해 발행된 ISO 표준은 61개이다. 기술위원회(TC)와 분과위원회(SC)와 관련 개발 중에 있는 ISO 표준은 10개다. 참여하고 있는 회원은 18명, 참관 회원은 30명이다.□ ISO/TC 5 분과위원회(Sub committee)와 관련된 ISO 표준 5개 목록▲ISO/TC 5/SC 1 Steel tubes▲ISO/TC 5/SC 2 Cast iron pipes, fittings and their joints▲ISO/TC 5/SC 5 Threaded fittings, solder fittings, welding fittings, pipe threads, thread gauges▲ISO/TC 5/SC 10 Metallic flanges and their joints▲ISO/TC 5/SC 11 Metal hoses and expansion joints
-
정부, 기술규제 대응으로 수출 걸림돌 해소한다국내외 기술규제에 대응하여 우리 수출기업의 무역기술장벽(TBT)*애로를 신속히 해소하고, 불합리한 국내 기술규제를 개선한 것으로 나타났다. 무역기술장벽(TBT, Technical Barriers to Trade)은 무역에 중대한 영향을 미치는 기술규정, 표준, 시험인증절차 등 각국의 기술규제를 의미한다. 산업통상자원부 국가기술표준원(이상훈 원장)은 매년 증가하고 있는 무역기술장벽(TBT)*에 대응하여 금년 해외 규제당국과 양자·다자 협상을 155건을 실시한 결과, 60건을 해소**하였다고 밝혔다. * WTO TBT 통보 추이 : (‘95) 389건 → (‘10) 1,874건 → (‘18) 3,065건 → (‘22) 4,000여건(추정) ** 협의/해소 : (‘19) 120건/50건 → (‘20) 131건/50건 → (‘21) 145건/56건 → (‘22) 155건/60건 금년에는 인증심사 지연 등 코로나19로 인한 TBT 애로를 해소한 것이 50%로 가장 많은 비중을 차지하고, 제품안전 28%, 탄소중립 및 신산업 관련 사항이 22%를 차지하였다. 해외 기술규제 대응사례 및 기대효과에 대한 내용은 다음과 같다. ▲코로나19로 인해 인도의 철강 제품 인증심사가 지연되어 제품 수출이 불투명했으나, 시행유예 및 신속한 심사 재개를 통해 약 160백만달러 규모의 인도 수출 가능 ▲태국의 에어컨 안전인증 취득 시 시험조건이 과도하여 기업의 인증부담이 있었으나, 시험기준 해석에 대해 협의하여 약 46백만달러 규모의 수출시장 확보 ▲사우디의 에어컨 에너지효율인증 시 과도한 정보 요구로 제조사의 고유기술 유출 우려 및 인증부담이 있었으나, 규제개선 요구를 통해 8백만달러 규모의 수출 가능 아울러, 국표원은 국‧내외 기술규제 대응 성과를 공유하고, 내년도 정책 방향을 모색하고자, ‘기술규제 혁신! 함께, The 가치’ 라는 주제로 12월 1일(목) 기술규제 대응의 날 행사를 개최하였다. 이날 국내외 기술규제 애로 해소에 기여한 삼성SDI, LG전자, 현대제뉴인 등 국내외 기술규제 대응 유공자 표창 10점, TBT 논문대회 입상에 상장 4점을 수여하였으며, 탄소중립 관련 5대 신산업분야 전문가와 함께 탄소중립 TBT 동향을 전망하고, 수출기업을 위한 민‧관의 대응 전략을 논의하였다. * 탄소중립 TBT 동향분석 및 시사점은 올해 말에 이슈보고서로 제작‧배포 예정 전문가들은 향후 에너지효율이나 에코디자인 등 탄소중립과 인공지능, 사이버보안 등 디지털 전환에 관련한 기술규제가 지속 증가할 것으로 전망하였다. 이상훈 원장은 그간 기술규제 대응 성과에 기여한 기업 및 유관기관 관계자들의 노고를 격려하고, 국제에너지기구(IEA)가 ‘에너지효율’을 지속가능한 에너지 시스템의 ‘첫번째 연료(First Fuel)’라고 공표한 점을 지적하고, 향후 탄소중립 관련 기술규제는 더욱 강화될 것이라 전망하며, ”민·관이 협력하여 국내외 기술규제 애로를 해소하여 수출에 차질이 없도록 적극 노력해야 한다“ 고 강조하였다.
-
[특집] ISO/TC 4 기술위원회(Technical Committees) 소개▲스웨덴표준기구(Swedish Institute for Standards, SIS) [출처=홈페이지] 스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.세 번째로 살펴본 ISO/TC 4 롤링 베어링(Rolling bearings) 관련 기술위원회 역시 TC1, TC2와 같이 1947년 구성됐다. 사무국은 스웨덴표준기구(Swedish Institute for Standards, SIS)에서 맡고 있다.위원회는 사라 베르그렌(Ms Sara Berggren)이 책임지고 있으며 의장은 필립 로젠그렌(Mr Filip Rosengren)으로 임기는 2022년까지다. ISO 기술 프로그램 관리자는 츄안유 조우(Ms Chuanyu Zou), ISO 편집 관리자는 이본 헨(Mrs Yvonne Chen) 등이다.범위는 윤활유, 부속품 등을 포함해 롤링 운동의 원리를 기반으로 하는 모든 형태와 사이즈의 베어링 요소를 표준화하는 것이다. 또한 접촉면이 구면인 플레인 베어링의 적용 및 식별, 표준화 등도 포함된다.현재 기술위원회(TC)와 분과위원회(SC)와 관련해 발행된 ISO 표준은 80개이다. 이 중 ISO/TC 4의 직접적인 책임 하에 있는 표준은 19개다.기술위원회(TC)와 분과위원회(SC)와 관련 개발 중에 있는 ISO 표준은 12개다. ISO/TC 4의 직접적인 책임 하에 개발하고 있는 표준은 12개다. 참여하고 있는 회원은 19명, 참관 회원은 21명이다.□ ISO/TC 4 사무국의 직접적인 책임하에 발행된 ISO 표준 19개 목록▲ISO 15:2017 Rolling bearings — Radial bearings — Boundary dimensions, general plan▲ISO 104:2015 Rolling bearings — Thrust bearings — Boundary dimensions, general plan▲ISO 113:2010 Rolling bearings — Plummer block housings — Boundary dimensions▲ISO 2982-1:2013 Rolling bearings — Accessories — Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves▲ISO 2982-2:2013 Rolling bearings — Accessories — Part 2: Dimensions for locknuts and locking devices▲ISO 5593:2019 Rolling bearings — Vocabulary▲ISO 15241:2012 Rolling bearings — Symbols for physical quantities▲ISO 15241:2012/Amd 1:2020 Rolling bearings — Symbols for physical quantities — Amendment 1▲ISO 15242-1:2015 Rolling bearings — Measuring methods for vibration — Part 1: Fundamentals▲ISO 15242-2:2015 Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface▲ISO 15242-3:2017 Rolling bearings — Measuring methods for vibration — Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface▲ISO 15242-4:2017 Rolling bearings — Measuring methods for vibration — Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface▲ISO 15243:2017 Rolling bearings — Damage and failures — Terms, characteristics and causes▲ISO 21107:2015 Rolling bearings and spherical plain bearings — Search structure for electronic media — Characteristics and performance criteria identified by property vocabulary▲ISO 21250-1:2020 Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine▲ISO 21250-2:2020 Rolling bearings — Noise testing of rolling bearing greases — Part 2: Test and evaluation method BQ+▲ISO 21250-3:2020 Rolling bearings — Noise testing of rolling bearing greases — Part 3: Test and evaluation method MQ▲ISO 21250-4:2020 Rolling bearings — Noise testing of rolling bearing greases — Part 4: Test and evaluation method NQ▲ISO/TS 23768:2022 Rolling bearings — Parts library — Reference dictionary for rolling bearings□ ISO/TC 4 사무국의 직접적인 책임하에 개발중인 ISO 표준 3개 목록▲ISO/AWI 3643 Rolling bearings — Ceramic rolling elements — Common vocabulary and characteristics of surface imperfections▲ISO/FDIS 5593 Rolling bearings — Vocabulary▲ISO/WD 7544 Rolling bearings — Test and assessment methods for cleanliness