검색결과
-
[특집-기술위원회] TC 127 - 토공장비(Earth-moving machinery)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다. 기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123 등도 포함된다.ISO/TC 127 토공장비(Earth-moving machinery)와 관련된 기술위원회는 TC 126과 마찬가지로 1968년 결성됐다. 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 샐리 사이츠(Ms Sally Seitz)가 책임지고 있다. 현재 의장은 찰스 크로웰(Mr Charles Crowell)로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 파비올라 카라골 리베라(Ms Fabiola Caragol Rivera) 등으로 조사됐다.범위는 토공 및 관련 기계의 명명법, 사용 분류, 등급, 기술 요구 사항, 테스트 방법, 안전 요구 사항, 작동, 유지 관리 매뉴얼 형식의 표준화다.현재 ISO/TC 127 사무국과 관련해 발행된 표준은 178개며 ISO/TC 127 사무국의 직접적인 책임 하에 발행한 표준은 4개다. ISO/TC 127 사무국과 관련해 개발 중인 표준은 18개다. 참여하고 있는 회원은 24개국, 참관 회원은 19개국이다.□ ISO/TC 127 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 4개 목록▷ISO 10987-2:2017 Earth-moving machinery — Sustainability — Part 2: Remanufacturing▷ISO 10987-3:2017 Earth-moving machinery — Sustainability — Part 3: Used machines▷ISO 10987:2012 Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting▷ISO/TR 19948:2016 Earth-moving machinery — Conformity assessment and certification process□ ISO/TC 127 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 127/SC 1 Test methods relating to safety and machine performance ; 발행된 표준 36개, 개발 중인 표준 1개▷ISO/TC 127/SC 2 Safety, ergonomics and general requirements ; 발행된 표준 76개, 개발 중인 표준 12개▷ISO/TC 127/SC 3 Machine characteristics, electrical and electronic systems, operation and maintenance ; 발행된 표준 39개, 개발 중인 표준 3개▷ISO/TC 127/SC 4 Terminology, commercial nomenclature, classification and ratings ; 발행된 표준 23개, 개발 중인 표준 2개□ ISO/TC 127 사무국의 작업그룹(Working Group, WG) 현황▷ISO/TC 127/AHG 3 Investigation regarding the differences between block handlers and wheel loaders▷ISO/TC 127/CAG Chair's Advisory Group▷ISO/TC 127/SG 1 ISO Off-Road Mobile Work Machine▷ISO/TC 127/WG 8 Sustainability▷ISO/TC 127/WG 17 Rechargeable Energy Storage System (RESS) application for EMM (ISO 5757)
-
[특집-기술위원회] TC 126 - 담배 및 담배제품(Tobacco and tobacco products)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123 등도 포함된다.ISO/TC 126 담배 및 담배제품(Tobacco and tobacco products)과 관련된 기술위원회는 1968년 결성됐다. 사무국은 독일표준화협회(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 줄리안 정(Mrs Juliane Jung)가 책임지고 있다. 현재 의장은 울프디터 헬러(Mr Prof. Dr Wolf-Dieter Heller)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 타마호 타카이(Ms Tamaho Takai), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등으로 조사됐다.범위는 △분류, 정의 및 용어 △재료 및 특성 △치수 및 공차 △계산 방법을 포함한 테스트 및 품질 관리 방법 등에 대한 플레인 베어링의 표준화다.비제조 담배, 모든 종류의 담배 제품, 담배 제품 제조에 사용되는 재료 및 환경적 담배 연기 측면을 포함한 담배 연기에 대한 용어 및 시험 방법의 표준화다. 취급, 보관, 포장 및 운송에 대한 사양과 질문이 적절하게 포함됐다.담배 제품이란 인간이 사용하도록 의도된 담배로 제조되거나 파생된 모든 제품 및 흡연 또는 무연 제품과 유사한 방식으로 사용되는 제품을 의미한다.현재 ISO/TC 126 사무국과 관련해 발행된 표준은 96개며 ISO/TC 126 사무국의 직접적인 책임하에 발행한 표준은 65개다.ISO/TC 126 사무국과 관련해 개발 중인 표준은 11개며 ISO/TC 126 사무국의 직접적인 책임 하에 개발 중인 표준은 9개다. 참여하고 있는 회원은 30개국, 참관 회원은 35개국이다.□ ISO/TC 126 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 65개 중 15개 목록▷ISO 2881:1992 Tobacco and tobacco products — Determination of alkaloid content — Spectrometric method▷ISO 3308:2012 Routine analytical cigarette-smoking machine — Definitions and standard conditions▷ISO 3400:1997 Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method▷ISO 3400:1997/Amd 1:2009 Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method — Amendment 1▷ISO 3401:1991 Cigarettes — Determination of alkaloid retention by the filters — Spectrometric method▷ISO 3402:2023 Tobacco and tobacco products — Atmosphere for conditioning and testing▷ISO 4387:2019 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine▷ISO 4388:1991 Cigarettes — Determination of the smoke condensate retention index of a filter — Direct spectrometric method▷ISO 4389:2000 Tobacco and tobacco products — Determination of organochlorine pesticide residues — Gas chromatographic method▷ISO 6466:1983 Tobacco and tobacco products — Determination of dithiocarbamate pesticides residues — Molecular absorption spectrometric method▷ISO 6488:2021 Tobacco and tobacco products — Determination of water content — Karl Fischer method▷ISO 8243:2013 Cigarettes — Sampling▷ISO 8454:2007 Cigarettes — Determination of carbon monoxide in the vapour phase of cigarette smoke — NDIR method▷ISO 8454:2007/Amd 1:2009 Cigarettes — Determination of carbon monoxide in the vapour phase of cigarette smoke — NDIR method — Amendment 1▷ISO 8454:2007/Amd 2:2019 Cigarettes — Determination of carbon monoxide in the vapour phase of cigarette smoke — NDIR method — Amendment 2□ ISO/TC 126 사무국 분과위원회(Subcommittee)의 책임 하에 개발 중인 표준 9개 목록▷ISO/DIS 5501-1 Tobacco heating systems — Definitions and standard conditions for aerosol generation and collection — Part 1: Electrically Heated Tobacco Products (eHTPs)▷ISO/DIS 5501-2 Tobacco heating systems — Definitions and standard conditions for aerosol generation and collection — Part 2: Aerosol Heated Tobacco Products (aHTPs)▷ISO/DIS 5501-3 Tobacco heating systems — Definitions and standard conditions for aerosol generation and collection — Part 3: Carbon Heated Tobacco Products (cHTPs)▷ISO/AWI 5622 Tobacco heating systems — Carbon monoxide▷ISO/DIS 6080 Tobacco heating systems — Terms and definitions▷ISO/DIS 8454 Cigarettes — Determination of carbon monoxide in the vapour phase of cigarette smoke — NDIR method▷ISO 9322 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products — Determination of acetate and citrate content — Ion chromatographic method▷ISO/AWI 21109 Nicotine pouches — Test method for pH▷ISO/AWI 21114 Nicotine pouches — Test method for nicotine content□ ISO/TC 126 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 126/SC 1 Physical and dimensional tests ; 발행된 표준 12개, 개발 중인 표준 1개▷ISO/TC 126/SC 2 Leaf tobacco ; 발행된 표준 14개, 개발 중인 표준 0개▷ISO/TC 126/SC 3 Vape and vapour products ; 발행된 표준 5개, 개발 중인 표준 1개□ ISO/TC 126 사무국의 작업그룹(Working Group, WG) 현황▷ISO/TC 126/WG 19 Revision of ISO 15592-3▷ISO/TC 126/WG 22 Tobacco heating systems▷ISO/TC 126/WG 23 Revision of ISO 3402▷ISO/TC 126/WG 24 Nicotine pouches
-
[특집-공동기술위원회] ⑥ISO/IEC JTC 1/SC 7 소프트웨어 및 시스템 엔지니어링(Software and systems engineering) 소개 - 1스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원조직이다.기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만 명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공한다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축한다. 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발 중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.공동 기술위원회(Joint Technical Committee, JTC) 산하에서 활동하고 있는 분과위원회(Subcommittee, SC) 중 SC 1, SC 2, SC 6에 이어 SC 7에 대해 살펴보면 다음과 같다.ISO/IEC JTC 1/SC 7 소프트웨어 및 시스템 엔지니어링(Software and systems engineering)과 관련된 분과위원회는 1987년 결성됐다. 사무국은 인도 표준국(Bureau of Indian Standards, BIS)에서 맡고 있다.위원회는 레나 가르그(Ms Reena Garg)이 책임지고 있다. 현재 의장은 선딥 오베로이(Dr Sundeep Oberoi)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), ISO 편집 관리자는 이본느 헨(Mrs Yvonne Chen) 등으로 조사됐다.범위는 소프트웨어 제품 및 시스템 엔지니어링을 위한 프로세스, 지원 도구 및 지원 기술의 표준화다. 참고로 프로세스, 도구 및 기술은 JTC 1 참조 약관의 범위 내에 있으며 JTC 1이 다른 SC에 할당한 특정 도구 및 기술은 제외된다.현재 ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임 하에 발행된 표준은 212개며 개발 중인 표준은 41개다. 참여하고 있는 회원은 37개국, 참관 회원은 24개국이다.□ ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임하에 발행된 표준 및(또는) 프로젝트 212개 중 15개 목록▷ISO 5806:1984 Information processing — Specification of single-hit decision tables▷ISO 5807:1985 Information processing — Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts▷ISO/IEC TR 7052:2023 Software engineering — Controlling frequently occurring risks during development and maintenance of custom software▷ISO/IEC 8631:1989 Information technology — Program constructs and conventions for their representation▷ISO 8790:1987 Information processing systems — Computer system configuration diagram symbols and conventions▷ISO 8807:1989 Information processing systems — Open Systems Interconnection — LOTOS — A formal description technique based on the temporal ordering of observational behaviour▷ISO/IEC TR 10000-1:1998 Information technology — Framework and taxonomy of International Standardized Profiles — Part 1: General principles and documentation framework▷ISO/IEC 10746-1:1998 Information technology — Open Distributed Processing — Reference model: Overview — Part 1:▷ISO/IEC 10746-2:2009 Information technology — Open distributed processing — Reference model: Foundations — Part 2:▷ISO/IEC 10746-3:2009 Information technology — Open distributed processing — Reference model: Architecture — Part 3:▷ISO/IEC 10746-4:1998 Information technology — Open Distributed Processing — Reference Model: Architectural semantics — Part 4:▷ISO/IEC 10746-4:1998/Amd 1:2001 Information technology — Open Distributed Processing — Reference Model: Architectural semantics — Part 4: — Amendment 1: Computational formalization▷ISO/IEC 11411:1995 Information technology — Representation for human communication of state transition of software▷ISO/IEC TR 12182:2015 Systems and software engineering — Framework for categorization of IT systems and software, and guide for applying it▷ISO/IEC/IEEE 12207-2:2020 Systems and software engineering — Software life cycle processes — Part 2: Relation and mapping between ISO/IEC/IEEE 12207:2017 and ISO/IEC 12207:2008□ ISO/IEC JTC 1/SC 7 사무국의 직접적인 책임하에 개발중인 표준 및(또는) 프로젝트 41개 중 15개 목록▷ISO/IEC CD 9837-1 Software and systems engineering — Systems resilience — Part 1: Concepts and vocabulary▷ISO/IEC/IEEE 15026-3 Systems and software engineering — Systems and software assurance — Part 3: System integrity levels▷ISO/IEC CD 19770-5 Information technology — IT asset management — Part 5: Overview and vocabulary▷ISO/IEC PRF 19770-6 Information technology — IT asset management — Part 6: Hardware identification tag▷ISO/IEC CD TS 19770-10 Information technology — IT asset management — Part 10: Guidance for implementing ITAM▷ISO/IEC CD 20582 Software and systems engineering — Capabilities of build and deployment tools▷ISO/IEC AWI TR 24586-1 Software and systems engineering — Agile and DevOps principles and practices — Part 1: Agile principles and practices▷ISO/IEC AWI TR 24586-2 Software and systems engineering — Agile and DevOps principles and practices — Part 2: DevOps principles and practices▷ISO/IEC/IEEE FDIS 24748-1 Systems and software engineering — Life cycle management — Part 1: Guidelines for life cycle management▷ISO/IEC/IEEE FDIS 24748-2 Systems and software engineering — Life cycle management — Part 2: Guidelines for the application of ISO/IEC/IEEE 15288 (System life cycle processes)▷ISO/IEC DIS 24773-2 Software and systems engineering — Certification of software and systems engineering professionals — Part 2: Guidance regarding description of knowledge, skills, and competencies contained in schemes▷ISO/IEC DIS 25002 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality models overview and usage▷ISO/IEC FDIS 25010 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Product quality model▷ISO/IEC PRF 25019 Systems and software engineering — Systems and software Quality Requirements and Evaluation (SQuaRE) — Quality-in-use model▷ISO/IEC DIS 25040 Systems and software engineering – Systems and software Quality Requirements and Evaluation (SQuaRE) – Quality evaluation framework
-
[특집-기술위원회] TC 117 - 팬(Fans)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111 등이다.ISO/TC 117 팬(Fans)과 관련된 기술위원회는 TC 112, TC 113, TC 114, TC 115와 마찬가지로 1964년 결성됐다. 사무국은 영국표준협회(British Standards Institution, BSI)에서 맡고 있다.위원회는 산드라 마이크 더건(Mr Mike Duggan)가 책임지고 있다. 현재 의장은 제프 록우드(Mr Geoff Lockwood)으로 임기는 2026년까지다.ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등으로 조사됐다.범위는 팬 분야의 표준화다. 단, IEC/TC 59 및 IEC/TC 61의 범위 내에서 가정용 및 이와 유사한 목적을 갖는 전기 팬 또는 팬 기반 전기 기기 등은 제외한다.현재 ISO/TC 117 사무국의 직접적인 책임하에 발행된 표준은 31개며 ISO/TC 117 사무국의 직접적인 책임하에 개발중인 표준은 8개다. 참여하고 있는 회원은 16명, 참관 회원은 22명이다.□ ISO/TC 117 사무국의 직접적인 책임 하에 발행된 표준 31개 중 15개 목록▷ISO 5801:2017 Fans — Performance testing using standardized airways▷ISO 5802:2001 Industrial fans — Performance testing in situ▷ISO 5802:2001/Amd 1:2015 Industrial fans — Performance testing in situ — Amendment 1▷ISO 12499:1999 Industrial fans — Mechanical safety of fans — Guarding▷ISO 12759-1:2023 Fans — Efficiency classification for fans — Part 1: General requirements▷ISO 12759-2:2019 Fans — Efficiency classification for fans — Part 2: Standard losses for drive components▷ISO 12759-3:2019 Fans — Efficiency classification for fans — Part 3: Fans without drives at maximum operating speed▷ISO 12759-4:2019 Fans — Efficiency classification for fans — Part 4: Driven fans at maximum operating speed▷ISO 12759-5:2021 Fans — Efficiency classification for fans — Part 5: Jet fans▷ISO 13347-1:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview▷ISO 13347-1:2004/Amd 1:2010 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview — Amendment 1▷ISO 13347-1:2004/Cor 1:2006 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview — Technical Corrigendum 1▷ISO 13347-2:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method▷ISO 13347-2:2004/Cor 1:2006 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method — Technical Corrigendum 1▷ISO 13347-3:2004 Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods□ ISO/TC 117 사무국의 직접적인 책임 하에 개발중인 표준 8개 목록▷ISO/DIS 12759-6 Fans — Efficiency classification for fans — Part 6: Calculation of the fan energy index▷ISO/CD 13348 Industrial fans — Tolerances, methods of conversion and technical data presentation▷ISO/DIS 13351 Fans — Dimensions▷ISO/AWI TR 16219 Fans — System effects and system effect factors▷ISO/AWI 21684 Fans — Laboratory Methods of Testing Air Circulating Fans for Rating and Certification▷ISO/DIS 24660 Fans — Determination of airflow propelled through an open personnel door by a positive pressure ventilator▷ISO/AWI 27327-1 Fans — Air curtain units — Part 1: Laboratory methods of testing for aerodynamic performance rating▷ISO/DTR 27327-3 Fans — Air curtain units — Part 3: Test methods to determine energy effectiveness
-
[특집-공동기술위원회] ③JTC 1 사무국 산하 분과위원회 및 실무위원회 현황스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다. 기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만명의 전문가에게 글로벌하고 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년에 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 202년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임 하에 개발중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다. ISO/IEC JTC 1 사무국 산하에서 활동중인 분과위원회와 실무위원회를 살며보면 아래와 같다.□ ISO/IEC JTC 1 사무국 산하 활동중인 분과위원회(Subcommittee) 및 실무위원회▷ISO/IEC JTC 1/SC 2 Coded character sets Subcommittee▷ISO/IEC JTC 1/SC 6 Telecommunications and information exchange between systems Subcommittee▷ISO/IEC JTC 1/SC 7 Software and systems engineering Subcommittee▷ISO/IEC JTC 1/SC 17 Cards and security devices for personal identification Subcommittee▷ISO/IEC JTC 1/SC 22 Programming languages, their environments and system software interfaces Subcommittee▷ISO/IEC JTC 1/SC 23 Digitally recorded media for information interchange and storage Subcommittee▷ISO/IEC JTC 1/SC 24 Computer graphics, image processing and environmental data representation Subcommittee▷ISO/IEC JTC 1/SC 25 Interconnection of information technology equipment Subcommittee▷ISO/IEC JTC 1/SC 27 Information security, cybersecurity and privacy protection Subcommittee▷ISO/IEC JTC 1/SC 28 Office equipment Subcommittee▷ISO/IEC JTC 1/SC 29 Coding of audio, picture, multimedia and hypermedia information Subcommittee▷ISO/IEC JTC 1/SC 31 Automatic identification and data capture techniques Subcommittee▷ISO/IEC JTC 1/SC 32 Data management and interchange Subcommittee▷ISO/IEC JTC 1/SC 34 Document description and processing languages Subcommittee▷ISO/IEC JTC 1/SC 35 User interfaces Subcommittee▷ISO/IEC JTC 1/SC 36 Information technology for learning, education and training Subcommittee▷ISO/IEC JTC 1/SC 37 Biometrics Subcommittee▷ISO/IEC JTC 1/SC 38 Cloud computing and distributed platforms Subcommittee▷ISO/IEC JTC 1/SC 39 Sustainability, IT and data centres Subcommittee▷ISO/IEC JTC 1/SC 40 IT service management and IT governance Subcommittee▷ISO/IEC JTC 1/SC 41 Internet of things and digital twin Subcommittee▷ISO/IEC JTC 1/SC 42 Artificial intelligence Subcommittee▷ISO/IEC JTC 1/SC 43 Brain-computer interfaces Subcommittee▷ISO/IEC JTC 1/AG 1 Advisory Group on Communications Working group▷ISO/IEC JTC 1/AG 2 Advisory Group on JTC 1 Emerging Technology and Innovation (JETI) Working group▷ISO/IEC JTC 1/AG 14 Systems Integration Facilitation (SIF) Working group▷ISO/IEC JTC 1/AG 15 Standards and Regulations Working group▷ISO/IEC JTC 1/AG 19 Coordination with ISO TC 20/SC 16 on Unmanned Aircraft Systems (UAS) Working group▷ISO/IEC JTC 1/AG 20 Coordination with ISO/TC 268/SC 1 on Smart Community Infrastructures Working group▷ISO/IEC JTC 1/AG 21 JTC1 strategic direction Working group▷ISO/IEC JTC 1/AHG 4 Collaboration across domains Working group▷ISO/IEC JTC 1/AHG 5 JTC 1 Standards Made Freely Available Working group▷ISO/IEC JTC 1/AHG 7 Supplement alignment Working group▷ISO/IEC JTC 1/JAG JTC 1 Advisory Group Working group▷ISO/IEC JTC 1/WG 11 Smart cities Working group▷ISO/IEC JTC 1/WG 12 3D Printing and scanning Working group▷ISO/IEC JTC 1/WG 13 Trustworthiness Working group▷ISO/IEC JTC 1/WG 14 Quantum information technology Working group▷ISO/IEC JTC 1/WG 15 JTC1 vocabulary Working group□ 참고로 다른 기술위원회의 책임 하에 공동 작업 중인 그룹▷ISO/TC 204/JWG 1 Joint ISO/TC 204 - ISO/IEC JTC1 WG: City data model transportation planning
-
[특집-공동기술위원회] ①JTC 1, 정보 기술(Information technology)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(Working Group, WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등을 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.또한 국제전기기술위원회(International Electro-technical Commission, IEC)는 전기 및 전자 제품의 고품질 인프라와 국제 무역을 뒷받침하는 글로벌 비영리 회원 조직이다. 기술 혁신, 저렴한 인프라 개발, 효율적이고 지속 가능한 에너지 접근, 스마트 도시화 및 교통 시스템, 기후 변화 완화를 촉진하고 사람과 환경의 안전을 향상시키는 역할을 수행하고 있다. 170개 이상의 국가를 통합하고 전 세계 2만명의 전문가에게 글로벌, 중립적이며 독립적인 표준화 플랫폼을 제공하고 있다. 장치, 시스템, 설치, 서비스 및 인력이 필요에 따라 작동함을 구성원이 인증하는 4가지 적합성 평가 시스템을 관리한다.적합성 평가와 함께 정부가 국가 품질 인프라를 구축하고 모든 규모의 기업이 전 세계 대부분의 국가에서 일관되게 안전하고 신뢰할 수 있는 제품을 사고 팔 수 있도록 하는 기술 프레임워크를 제공하는 약 1만개의 IEC 국제표준을 발행하고 있다.이러한 ISO와 IEC가 공동으로 구성한 기술위원회 ISO/IEC JTC 1 정보 기술(Information technology)에 대해 살펴볼 예정이다. JTC 1은 1987년 결성됐으며 사무국은 미국국립표준협회(American National Standards Institute, ANSI)에서 맡고 있다. 위원회는 리사 라지첼(Mrs Lisa Rajchel)가 책임지고 있다. 현재 의장은 필 웬블롬(Mr Phil Wennblom)으로 임기는 202년까지다.ISO 기술 프로그램 관리자는 앤드류 드라이든(Mr Andrew Dryden), 스티븐 더트널(Mr Stephen Dutnall), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다. 범위는 정보기술 분야의 표준화다.현재 ISO/IEC JTC 1의 직접적인 책임 하에 발행된 표준은 517개며 직접적인 책임하에 개발 중인 표준은 23개다. 참여하고 있는 회원은 40개국, 참관 회원은 62개국이다.□ ISO/IEC JTC 1 사무국의 직접적인 책임 하에 발행된 표준 517개 중 15개 목록▷ISO 1538:1984 Programming languages — ALGOL 60▷ISO 1730:1980 Dictation equipment — Basic operating requirements▷ISO 1858:1977 Information processing — General purpose hubs and reels, with 76 mm (3 in) centrehole, for magnetic tape used in interchange instrumentation applications▷ISO 1859:1973 Information processing — Unrecorded magnetic tapes for interchange instrumentation applications — General dimensional requirements▷ISO 1860:1986 Information processing — Precision reels for magnetic tape used in interchange instrumentation applications▷ISO 2257:1980 Office machines and printing machines used for information processing — Widths of fabric printing ribbons on spools▷ISO 2258:1976 Printing ribbons — Minimum markings to appear on containers▷ISO/IEC 2382:2015 Information technology — Vocabulary▷ISO 2775:1977 Office machines and printing machines used for information processing — Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons▷ISO 2784:1974 Continuous forms used for information processing — Sizes and sprocket feed holes▷ISO/IEC 3532-1:2023 Information technology — Medical image-based modelling for 3D printing — Part 1: General requirements▷ISO 3540:1976 Paper or plastic printing ribbons — Characteristics of cores▷ISO 3791:1976 Office machines and data processing equipment — Keyboard layouts for numeric applications▷ISO 3792:1976 Adding machines — Layout of function keyboard▷ISO 3802:1976 Information processing — General purpose reels with 8 mm (5/16 in) centre hole for magnetic tape for interchange instrumentation applications□ ISO/IEC JTC 1 사무국의 직접적인 책임 하에 개발중인 표준 23개 중 15개 목록▷ISO/IEC FDIS 3532-2 Information technology — Medical image-based modelling for 3D printing — Part 2: Segmentation▷ISO/IEC DIS 4879 Information technology — Quantum computing — Terminology and vocabulary▷ISO/IEC DIS 5087-2 Information technology — City data model — Part 2: City level concepts▷ISO/IEC DIS 5153-1 Information Technology — City service platform for public health emergencies — Part 1: Overview and general requirements▷ISO/IEC AWI 8801 Information Technology — 3D Printing and Scanning-- 3D scanned and labeled data Standard Operating Procedure (SOP) for evaluation of modelling from 3D scanned data▷ISO/IEC AWI 8803 Information Technology — 3D Printing and Scanning — accuracy and precision evaluation process for modeling from 3D scanned data▷ISO/IEC DIS 14776-346 Information technology — Small computer system interface (SCSI) — Part 346: Zoned Block Commands - 2 (ZBC-2)▷ISO/IEC AWI 16466 Information Technology — 3D Printing and scanning — Assessment methods of 3D scanned data for 3D printing model▷ISO/IEC DIS 17760-105 Information technology — ATA Command Set - 5 (ACS-5) — Part 105: Title missing▷ISO/IEC DIS 17917 Smart cities — Guidance to establishing a decision-making framework for sharing data and information services▷ISO/IEC AWI TR 18157 Information technology — Introduction to quantum computing▷ISO/IEC PRF 18974 Information technology — OpenChain security assurance specificationISO/IEC DIS 19987 Information technology — EPC Information Services (EPCIS)▷ISO/IEC DIS 19988 Information technology — Core Business Vocabulary (CBV)▷ISO/IEC AWI TR 20169 Information technology — Overview of smart city standardization
-
[기획-디지털 ID 표준] ⑤유럽표준화기구(ESOs) 및 표준 - 소속 기술위원회(TC)디지털 ID(Digital Identity) 분야에서 상호운용(interoperable)이 가능하고 안전한 서비스 보장을 위한 표준에 대한 수요가 증가하고 있다. 다양한 표준 조직 및 산업 기관이 활동하는 이유다. 유럽표준화기구(European Standardisation Organistions, ESOs), 유럽표준화위원회(European Committee for Standardization, CEN), 유럽전기기술표준화위원회(European Committee for Electrotechnical Standardization, CENELEC), 유럽전기통신표준화기구(European Telecommunication Standards Institute, ETSI) 등 디지털 ID 관련 표준을 개발하고 있는 기술위원회에 대해 살펴보면 다음과 같다.먼저 유럽전기통신표준화기구(ETSI)는 유럽의 eIDAS 규정과 전자 거래에 대한 신뢰를 제공하기 위한 국제사회의 일반 요구사항을 지원하는 다수의 표준을 발표했다.특히 ETSI 전자 서명 및 인프라 기술위원회(ETSI Electronic Signatures and Infrastructures Technical Committee)는 서비스 제공업체를 위한 정책, 보안 및 기술 요구사항에 대한 여러 표준을 제정했다.기술위원회(ETSI ESI/TC)는 디지털 서명의 형식, 생성, 검증을 위한 절차, 정책, 신뢰 앵커로서 신뢰할 수 있는 목록을 다룬다.CEN 기술위원회 224(CEN Technical Committee 224, CEN/TC 224)-MACHINE-READABLE CARDS, RELATED DEVICE INTERFACES AND OPERATIONS는 다중 부문 환경에서 보안 요소, 시스템, 운영, 개인정보 보호를 갖는 개인 식별 및 관련 개인 장치와 관련이 있다.기술위원회는 개인 식별, 관련 개인 장치의 상호운용성, 보안을 강화하기 위한 여러 표준을 발표했다. 이 중 CEN 기술위원회 224 내 워킹그룹 17, 18, 19이 디지털 ID와 관련이 있다.다른 실무그룹(Working Group, WG)은 WG 17 : ‘Protection Profiles in the Context of SSCD(secure signature creation device)’ △WG 18 : ‘Biometrics’ △WG 19 : ‘Breeder Documents' 등이다. 최근 유럽 디지털 지갑 EUDI Wallet 표준을 개발하기 위해 WG 20이 임시로 구성됐다.CEN/TC 224는 다중 부문 환경에서 개인 식별 및 관련 개인 장치, 시스템, 운영 및 개인 정보 보호의 상호 운용성과 보안을 강화하기 위해 표준을 개발하고 있다.여기에는 전자 식별, 전자 서명, 지불 및 청구, 출입, 국경 통제와 같은 애플리케이션 및 서비스와 같은 작업을 포함하고 있다. 또한 △카드, 모바일 장치 및 관련 인터페이스와 같이 폼 팩터와 독립적인 보안 요소를 갖춘 개인 장치 △인증, 기밀성, 무결성, 생체 인식, 개인 데이터 및 민감한 데이터 보호를 포함한 보안 서비스 △수용 장치, 서버, 암호화 모듈과 같은 시스템 구성 요소 등도 해당된다.CEN/TC 224 다중 부문 환경은 정부·시민, 교통, 은행, 전자 보건과 같은 부문 뿐만 아니라 카드 제조업체, 보안 기술, 적합성 평가기관, 소프트웨어 제조업체와 같은 공급 측면의 소비자 및 공급자가 포함된다. 참고로 CEN 기술 위원회 224 내 실무 그룹(WG)은 다음과 같다.▷CEN/TC 224/WG 1 - ICC physical characteristics▷CEN/TC 224/WG 2 - General concepts for ICC systems▷CEN/TC 224/WG 3 - Device interface characteristics▷CEN/TC 224/WG 6 - User Interface▷CEN/TC 224/WG 7 - PIN presentation▷CEN/TC 224/WG 8 - Thin flexible cards▷CEN/TC 224/WG 9 - Telecommunication applications▷CEN/TC 224/WG 10 - Intersector electronic purse▷CEN/TC 224/WG 11 - Transport applications▷CEN/TC 224/WG 12 - Health applications▷CEN/TC 224/WG 15 - European citizen card▷CEN/TC 224/WG 16 - Application Interface for smart cards used as Secure Signature Creation Devices▷CEN/TC 224/WG 17 - Protection Profiles in the context of SSCD▷CEN/TC 224/WG 18 - Interoperability of biometric recorded data▷CEN/TC 224/WG 19 - Breeder Documents▷CEN/TC 224/WG 20 - Ad Hoc Group on European Digital Identity WalletsCEN/CENELEC 공동 기술위원회 19(CEN/CENELEC Joint Technical Committee 19)는 블록체인(Blockchain) 및 분산 원장 기술(Distributed Ledger Technologies)을 다루는 위원회다.특히 실무 그룹 1(Working Group 1) : 분산형 신원 관리(Decentralised Identity Management)는 ISO 카운터파트너 ISO 기술위원회 307( ISO Technical Committee 307)과 긴밀한 접촉을 유지하고 있다.분산형 ID 관리(decentralised identity management) 및 DLTs(Distributed Ledger Technologies)에 의해 제공되는 지원 기능을 위한 프로세스, 역할, 관행에 대한 것이다. 식별자, 키, 증거 레지스트리, 트러스트 앵커(trust anchors) 관리를 포함한다.실무그룹 2(WG 2)는 환경 지속가능성(CEN/CLC/JTC 19/WG 2 - Environmental sustainability)을 다루고 있다.
-
HCT, ‘OnGo Alliance’ 자격 국내 최초로 취득하다HCT가 국내 최초로 ‘OnGo Alliance’ 자격 획득에 성공했다. HCT는 시험인증 및 교정분야에 선도적인 활동을 펼치고 있는 기업이다. 다양한 분야에서 인증 평가 활동을 수행하면서 이해관계자 간 중추적 역할을 수행하고 있다. 이를 통하여 제품과 서비스의 신뢰도를 향상시키고 인증 획득에 필요한 문제 해결에도 기여하고 있다. HCT가 국내 최초로 획득에 성공한 ‘OnGo Alliance’는 미국의 민간 광대역 무선 서비스(CBRS, Citizens Broadband Radio Service)대역을 사용하는 제품에 필수적으로 필요한 자격이다. OnGo Alliance는 공유 CBRS(Citizens Broadband Radio Service)* 스펙트럼에서 4G LTE 및 5G NR 무선 네트워크를 구축하는 업계 리딩 조직으로 모바일 사업자, 케이블 사업자 등 185개 이상의 회원사로 구성된 연합이다. *민간 광대역 무선 서비스(CBRS): 미국의 3.5GHz대역(3.55GHz~3.7GHz) 주파수를 이용하는 로컬 LTE 및 5G NR(뉴 라디오/New Radio) 통신 서비스. 미국 현지에서 출시되는 대부분의 전자기기가 CBRS 대역을 지원하고 있다. HCT가 ‘OnGo Alliance’ 자격을 획득하면서, CBRS 대역 사용기기에 대한 미국 인증을 국내에서도 시험할 수 있게 됐다. 따라서 해외 인증 획득에 필요했던 긴 인증기간과 고비용을 해소하는데 큰 도움이 될 것으로 보인다. HCT는 해당 인증 획득을 통하여, 인증 애로 해소는 물론이고 미국 진출을 희망하는 수출 기업에 큰 도움이 되길 바란다고 전했다.
-
[기획-디지털 ID 표준] ②디지털 ID 표준 개발 기관 및 조직컴퓨터와 인터넷의 보급으로 정보사회가 진전되면서 전 세계가 하나의 글로벌 빌리지, 즉 지구촌으로 동화되고 있다. 디지털 혁명은 디지털 서비스와 전자성거래의 발전을 가속화시켰다.2020년 1월부터 확산된 코로나19 팬데믹(대유행) 영향으로 대면 접촉이 제한되면서 비대면 서비스의 중요성은 높아졌다. 사이버 세상에서 상호작용이 증가하며 덩달아 전자거래 사기도 늘어났다.개인의 신원을 조작하거나 위변조할 수 있는 기술이 개발됐기 때문이다. 이로써 법인이나 개인 또는 전자 서비스 내 실체를 식별하는 디지털 신원(Digital identity)의 중요성이 부각됐다.디지털 신원 즉 디지털 ID 영역에는 다양한 표준이 있다. 디지털 ID 표준은 △정책 설명 △디지털 ID 발급 및 관리 서비스 △사용할 형식 및 프로토콜 △관련 서비스 감사 방법 △서비스 장치에 대한 요구사항 △추천하는 프로세스 및 알고리즘 등을 포함한다.디지털 ID 표준 개발은 유럽표준화기구, 국제표준화기구, 상업 포럼 및 컨소시업 등 다양한 기관과 조직이 수행하고 있다. 세부적으로 살펴보면 다음과 같다. ▶유럽 표준화 기구(European standardisation organisations) - 유럽전기통신표준협회(European Telecommunications Standards Institute, ETSI) - 유럽표준화위원회(European Committee for Standardization, CEN) - 유럽전기표준화위원회(European Committee for Electrotechnical Standardization, CENELEC)▶국제표준화기구(international standardisation organisations) - 세계표준화기구(International Organization for Standardization, ISO) - 국제전기통신연합(International Telecommunication Union, ITU) - 미국 전기전자공학자협회(Institute of Electrical and Electronics Engineers, IEEE) - 국제전기기술위원회(International Electrotechnical Commission, IEC) - 정보기술보안평가 공통기준(Common Criteria for Information Technology Security Evaluation, Common Criteria) - 유엔 국제민간항공기구(International Civil Aviation Organization, ICAO)▶상업 포럼 및 컨소시엄(commercial forums and consortia) - 국제인터넷표준화기구(Internet Engineering Task Force, IETF) - 인증기관 브라우저 포럼(Certification Authority Browser Forum, CABF) - 클라우드 시그니처 컨소시엄(Cloud Signature Consortium, CSC) - 오아시스(Organization for the Advancement of Structured Information Standards, OASIS) - OpenID 재단(OpenID Foundation, OpenID) - FIDO 얼라이언스(FIDO Alliance, FIDO)▶국가 조직(national organisations) - 프랑스 정보시스템 보안기구(Agence nationale de la sécurité des systèmes d’information, ANSSI) - 독일 사이버보안 당국(Bundesamt für Sicherheit in der Informationstechnik, BSI) - 영국표준협회(British Standards Institution, BSI) - 미국 국립표준기술원(National Institute of Standards and Technology, NIST) 일반적으로 처음 제정하는 표준은 공통된 작업 방식에 동의하는 것을 중요하게 여겨 프로토콜 및 형식과 같은 상호 운용성에 초점을 맞춘다. 디지털 ID도 예외는 아니었다.이후 장치 인증뿐만 아니라 서비스 제공업체의 정책 요구사항에 대한 보안 관련 표준이 제정됐다. 이를 통해 모범 사례를 설명하고 유사한 수준의 보안을 설정했다.
-
[특집-기술위원회] TC 113 - 유량측정(Hydrometry)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC1~TC67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC68 △1950년 TC74 △1951년 TC76 △1952년 TC77 △1953년 TC79, TC81 △1955년 TC82, TC83 △1956년 TC84, TC85 △1957년 TC86, TC87, TC89 △1958년 TC91, TC92 △1959년 TC94 △1960년 TC96, TC98 △1961년 TC101, TC102, TC 104, △1962년 TC105~TC107, △1963년 TC108~TC111 등이다.ISO/TC 113 유량측정(Hydrometry)과 관련된 기술위원회는 TC112와 마찬가지로 1964년 결성됐다. 사무국은 인도표준국(Bureau of Indian Standards, BIS)에서 맡고 있다.위원회는 바누 프라카시(Mr R. BHANU PRAKASH)가 책임지고 있다. 현재 의장은 기리쉬 쿠마르 아가르왈(Mr Girish Kumar Agarwal)으로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 산잘리 자인(Ms Sanjali Jain) 등으로 조사됐다.범위는 개수로에서 수위, 속도, 배출 및 퇴적물, 강수량 및 증발산량, 지하수의 가용성 및 이동의 수위측정을 위한 기술과 관련된 방법, 절차, 기구, 장비의 표준화다. 또한 용어 및 기호, 데이터 수집, 평가, 분석, 해석 및 제시, 불확실성의 평가 등도 포함하고 있다.현재 ISO/TC 113과 관련해 발행된 표준은 65개며 개발 중인 표준은 5개다. ISO/TC 113 사무국의 직접적인 책임 하에 발행된 표준은 8개다. 참여하고 있는 회원은 14명, 참관 회원은 23명이다.□ ISO/TC 113 사무국의 직접적인 책임 하에 발행된 표준 8개 목록▷ISO 772:2022 Hydrometry — Vocabulary and symbols▷ISO 4369:1979 Measurement of liquid flow in open channels — Moving-boat method▷ISO 9196:1992 Liquid flow measurement in open channels — Flow measurements under ice conditions▷ISO 9555-1:1994 Measurement of liquid flow in open channels — Tracer dilution methods for the measurement of steady flow — Part 1: General▷ISO 9555-3:1992 Measurement of liquid flow in open channels — Tracer dilution methods for the measurement of steady flow — Part 3: Chemical tracers▷ISO 9555-4:1992 Measurement of liquid flow in open channels — Tracer dilution methods for the measurement of steady flow — Part 4: Fluorescent tracers▷ISO 9825:2005 Hydrometry — Field measurement of discharge in large rivers and rivers in flood▷ISO 25377:2020 Hydrometric uncertainty guidance (HUG)□ ISO/TC 113 사무국의 소위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 113/SC 1 Velocity area methods ; 발행된 표준 12개, 개발 중인 표준 1개▷ISO/TC 113/SC 2 Flow measurement structures ; 발행된 표준 16개, 개발 중인 표준 1개▷ISO/TC 113/SC 5 Instruments, equipment and data management ; 발행된 표준 12개, 개발 중인 표준 0개▷ISO/TC 113/SC 6 Sediment transport ; 발행된 표준 11개, 개발 중인 표준 1개▷ISO/TC 113/SC 8 Ground water ; 발행된 표준 6개, 개발 중인 표준 2개