검색결과
-
[특집-기술위원회] TC 190 - 토양 품질(Soil quality)… 준설된 수중 토양 물질(굴착된 퇴적물)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186, △1984년 TC 188등이 있다.ISO/TC 190 토양 품질(Soil quality)과 관련된 기술위원회는 TC 189와 마찬가지로 1985년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 테레사 게스바인(Mrs Theresa Geßwein)이 책임지고 있다. 현재 의장은 냇 클라우스 리파르트(Mr Dr. rer. nat Klaus Liphard)이다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 발레리아 아가멤논(Ms Valeria Agamennone)등으로 조사됐다.범위는 토양 품질 분야의 표준화다. 원지 토양(원래의 토양), 준설된 수중 토양 물질(굴착된 퇴적물)을 포함해 토양 내 또는 토양 위에서 재사용하기 위한 토양 물질 등도 포함된다.단 토양 품질 평가를 위한 임계값 또는 한계값이나 ISO/TC 182 지질공학에서 다루고 있는 토목공학적 측면이나 ISO/TC 147 수질에서 다루고 있는 현장 퇴적물 등은 제외한다.현재 ISO/TC 190 사무국과 관련해 발행된 표준은 198개며 ISO/TC 190 사무국의 직접적인 책임 하에 발행된 표준은 16개다.ISO/TC 190 사무국과 관련해 개발된 표준은 16개며 ISO/TC 190 사무국의 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 31개국, 참관 회원은 30개국이다.□ ISO/TC 190 사무국의 직접적인 책임 하에 발행된 표준 16개 목록▷ISO 4974:2023 Soil quality — Guidance on soil temperature measurement▷ISO 11074:2015 Soil quality — Vocabulary▷ISO 11074:2015/Amd 1:2020 Soil quality — Vocabulary — Amendment 1▷ISO 11275:2004 Soil quality — Determination of unsaturated hydraulic conductivity and water-retention characteristic — Wind's evaporation method▷ISO 15709:2002 Soil quality — Soil water and the unsaturated zone — Definitions, symbols and theory▷ISO 15903:2002 Soil quality — Format for recording soil and site information▷ISO 16586:2003 Soil quality — Determination of soil water content as a volume fraction on the basis of known dry bulk density — Gravimetric method▷ISO 16586:2003/Cor 1:2009 Soil quality — Determination of soil water content as a volume fraction on the basis of known dry bulk density — Gravimetric method — Technical Corrigendum 1▷ISO 17312:2005 Soil quality — Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter▷ISO 17313:2004 Soil quality — Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter▷ISO 20951:2019 Soil Quality — Guidance on methods for measuring greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) fluxes between soils and the atmosphere▷ISO 23400:2021 Guidelines for the determination of organic carbon and nitrogen stocks and their variations in mineral soils at field scale▷ISO 23992:2022 Soil quality — Framework for detailed recording and monitoring of changes in dynamic soil properties▷ISO 25177:2019 Soil quality — Field soil description▷ISO 28258:2013 Soil quality — Digital exchange of soil-related data▷ISO 28258:2013/Amd 1:2019 Soil quality — Digital exchange of soil-related data — Amendment 1□ ISO/TC 190 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/DIS 11074 Soil quality — Vocabulary▷ISO/CD 18718 Assessment of soil functions and related-ecosystem services: definitions and conceptual Framework▷ISO/CD 18721 Assessment of ecological soil functions: indicators and methods▷ISO/AWI 21251 Guidance for estimating organic carbon stocks in soils according to their biogeochemical stability or or residence time□ ISO/TC 190 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 190/SC 3 Chemical and physical characterization ; 발행된 표준 87개, 개발 중인 표준 13개▷ISO/TC 190/SC 4 Biological characterization ; 발행된 표준 56개, 개발 중인 표준 9개▷ISO/TC 190/SC 7 Impact assessment ; 발행된 표준 39개, 개발 중인 표준 4개
-
[특집-기술위원회] TC 189 - 세라믹 타일(Ceramic tile)… 바닥재 및 벽면 마감재에 사용되는 세라믹 타일의 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186, △1984년 TC 188등이 있다.ISO/TC 189 세라믹 타일(Ceramic tile)과 관련된 기술위원회는 1985년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 존 P. 샌더스(Dr John P. Sanders)이 책임지고 있다. 현재 의장은 노아 치티(Mr Noah Chitty)이며 임기는 2024년까지다.ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 루시 커크(Ms Lucy Kirk)등으로 조사됐다. 범위는 일반적으로 바닥재 및 벽면 마감재에 사용되는 세라믹 타일의 표준화다.현재 ISO/TC 189 사무국의 직접적인 책임 하에 발행된 표준은 35개며 ISO/TC 189 사무국의 직접적인 책임 하에 개발 중인 표준은 12개다. 참여하고 있는 회원은 35개국, 참관 회원은 25개국이다.□ ISO/TC 189 사무국의 직접적인 책임 하에 발행된 표준 35개 중 15개 목록▷ISO 10545-1:2014 Ceramic tiles — Part 1: Sampling and basis for acceptance▷ISO 10545-2:2018 Ceramic tiles — Part 2: Determination of dimensions and surface quality▷ISO 10545-3:2018 Ceramic tiles — Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density▷ISO 10545-4:2019 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength▷ISO 10545-5:1996 Ceramic tiles — Part 5: Determination of impact resistance by measurement of coefficient of restitution▷ISO 10545-5:1996/Cor 1:1997 Ceramic tiles — Part 5: Determination of impact resistance by measurement of coefficient of restitution — Technical Corrigendum 1▷ISO 10545-6:2010 Ceramic tiles — Part 6: Determination of resistance to deep abrasion for unglazed tiles▷ISO 10545-7:1996 Ceramic tiles — Part 7: Determination of resistance to surface abrasion for glazed tiles▷ISO 10545-8:2014 Ceramic tiles — Part 8: Determination of linear thermal expansion▷ISO 10545-9:2013 Ceramic tiles — Part 9: Determination of resistance to thermal shock▷ISO 10545-10:2021 Ceramic tiles — Part 10: Determination of moisture expansion▷ISO 10545-11:1994 Ceramic tiles — Part 11: Determination of crazing resistance for glazed tiles▷ISO 10545-12:1995 Ceramic tiles — Part 12: Determination of frost resistance▷ISO 10545-12:1995/Cor 1:1997 Ceramic tiles — Part 12: Determination of frost resistance — Technical Corrigendum 1▷ISO 10545-13:2016 Ceramic tiles — Part 13: Determination of chemical resistance□ ISO/TC 189 사무국의 직접적인 책임 하에 개발 중인 표준 12개 목록▷ISO/CD 10545-22 Ceramic tiles — Part 22: Determination of resistance to wear with a multi-attribute method▷ISO/CD 10545-23 Ceramic tiles — Part 23: Determination of elastic modulus for substrates and glaze layer▷ISO/WD 10545-24 Ceramic tiles — Part 24: Tensile adhesion strength of multilayer tiles and tile adhesives▷ISO/AWI 10545-25 Ceramic tiles — Part 25: Determination of reverse staining resistance▷ISO/AWI 13007-1 Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives▷ISO/AWI 13007-3 Ceramic tiles — Grouts and adhesives — Part 3: Terms, definitions and specifications for grouts▷ISO/AWI 13007-7 Ceramic tiles — Grouts and adhesives — Part 7: Sound dampening materials for use beneath ceramic tiling bonded with adhesives — Requirements, test methods, evaluation of conformity, classification and designation▷ISO/AWI TR 17870-2 Ceramic tiles — Guidelines for installation — Part 2: Installation of thin ceramic wall and floor tiles and panels▷ISO/AWI 17889-3 Ceramic tiling systems — Sustainability for ceramic tiles and installation materials — Part 3: Guidelines for the application and verification of ISO 17889-1 and 17889-2▷ISO/WD 20355 Quantitative determination of antiviral activity of ceramic tile surfaces and survival of viruses on ceramic surfaces — Test methods — Ceramic tile surfaces with incorporated antiviral agents▷ISO/WD 20356 Quantitative determination of antifungal activity of ceramic tile surfaces — Test methods — Ceramic tile surfaces with incorporated antifungal agents▷ISO/WD 22267-1 Ceramic Tiling Systems — Embodied Carbon — Part 1: Calculation of Embodied Carbon of Ceramic Tile
-
[특집-기술위원회] TC 188 - 소형선박(Small craft)… 선체 길이가 최대 24미터인 레저 선박 및 유사한 장비를 사용하는 기타 소형 선박스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186등이 있다.ISO/TC 188 소형선박(Small craft)과 관련된 기술위원회는 1984년 결성됐다. 사무국은 스웨덴 국립표준청(Svenska institutet för standarder, SIS)에서 맡고 있다.위원회는 아네트 에릭슨(Ms Anette Eriksson)이 책임지고 있다. 현재 의장은 크레이그 숄튼(Mr Craig Scholten)이며 임기는 2026년까지다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández) ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 선체 길이가 최대 24미터인 레저 선박 및 유사한 장비를 사용하는 기타 소형 선박의 장비 및 구조 세부 사항의 표준화다. 단, ISO/TC 8이 다루고 있는 구명정 및 구명 장비는 제외한다.현재 ISO/TC 188 사무국과 관련해 발행된 표준은 96개며 ISO/TC 188 사무국의 직접적인 책임 하에 발행된 표준은 82개다.ISO/TC 188 사무국과 관련해 개발 중인 표준은 16개며 ISO/TC 188 사무국의 직접적인 책임 하에 개발 중인 표준은 12개다. 참여하고 있는 회원은 22개국, 참관 회원은 23개국이다.□ ISO/TC 188 사무국의 직접적인 책임 하에 발행된 표준 82개 중 15개 목록▷ISO 4566:1992 Small craft with inboard engine — Propeller shaft ends and bosses with 1:10 taper▷ISO 6017:2024 Small craft — Automatic watertight ventilation shutdown system▷ISO 6185-1:2001 Inflatable boats — Part 1: Boats with a maximum motor power rating of 4,5 kW▷ISO 6185-2:2001 Inflatable boats — Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive▷ISO 6185-3:2014 Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater▷ISO 6185-4:2011 Inflatable boats — Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater▷ISO 7840:2021 Small craft — Fire-resistant fuel hoses▷ISO 8099-1:2018 Small craft — Waste systems — Part 1: Waste water retention▷ISO 8099-2:2020 Small craft — Waste systems — Part 2: Sewage treatment systems▷ISO 8469:2021 Small craft — Non-fire-resistant fuel hoses▷ISO 8665:2006 Small craft — Marine propulsion reciprocating internal combustion engines — Power measurements and declarations▷ISO 8666:2020 Small craft — Principal data▷ISO 8845:1994 Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper▷ISO 8845:1994/Cor 1:1995 Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper — Technical Corrigendum 1▷ISO 8846:1990 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases□ ISO/TC 188 사무국의 직접적인 책임 하에 개발 중인 표준 12개 목록▷ISO/FDIS 6185-3 Inflatable boats — Part 3: Boats with a length of the hull less than 8 m with a motor power rating of 15 kW and greater▷ISO/FDIS 8665-2 Small craft — Power measurements and declarations — Part 2: Electric marine propulsion▷ISO/DIS 8846 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases▷ISO/DIS 10239.2 Small craft — Liquefied petroleum gas (LPG) systems▷ISO 11812:2020/DAmd 1 Small craft — Watertight or quick-draining recesses and cockpits — Amendment 1▷ISO/CD 12215-9 Small craft — Hull construction and scantlings — Part 9: Sailing craft appendages▷ISO/AWI 12217-1 Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m▷ISO/AWI 12217-2 Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m▷ISO/AWI 12217-3 Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m▷ISO/FDIS 15085 Small craft — Protection from falling overboard and means of reboarding▷ISO/DIS 16315 Small craft — Electrical systems used for electrical propulsion▷ISO/CD 23625 Small craft — Lithium-ion batteries□ ISO/TC 188 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 188/SC 1 Personal safety equipment ; 발행된 표준 14개, 개발 중인 표준 4개
-
[특집-기술위원회] TC 183 - 구리, 납, 아연, 니켈 광석 및 정광(Copper, lead, zinc and nickel ores and concentrates)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 등이 있다.ISO/TC 183 구리, 납, 아연, 니켈 광석 및 정광(Copper, lead, zinc and nickel ores and concentrates)과 관련된 기술위원회는 1983년 결성됐다. 사무국은 오스트레일리아 표준협회(Standards Australia, SA)에서 맡고 있다.위원회는 재스민 브린스미드(Ms Jasmine Brinsmead)가 책임지고 있으며 현재 의장은 마크 오드와이어(Mr Mark O'Dwyer)이며 임기는 2026년까지다. ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 샘플링, 화학적 분석 및 물리적 테스트를 포함해 구리, 납, 아연, 니켈 광석 및 정광(농축물), 제련소 잔류물 분야의 표준화다.현재 ISO/TC 183 사무국의 직접적인 책임 하에 발행된 표준은 28개며 ISO/TC 183 사무국의 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 8개국, 참관 회원은 26개국이다.□ ISO/TC 183 사무국의 직접적인 책임 하에 발행된 표준 28개 중 15개 목록▷ISO 3483:2023 Copper and zinc sulfide concentrates — Determination of thallium — Acid digestion and inductively coupled plasma-mass spectrometry▷ISO 9599:2015 Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method▷ISO 10251:2006 Copper, lead, zinc and nickel concentrates — Determination of mass loss of bulk material on drying▷ISO 10258:2018 Copper sulfide concentrates — Determination of copper content — Titrimetric methods▷ISO 10378:2016 Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method▷ISO 10469:2006 Copper sulfide concentrates — Determination of copper — Electrogravimetric method▷ISO 11441:1995 Lead sulfide concentrates — Determination of lead content — Back titration of EDTA after precipitation of lead sulfate▷ISO 11790:2017 Copper, lead, zinc and nickel concentrates — Guidelines for the inspection of mechanical sampling systems▷ISO 11794:2017 Copper, lead, zinc and nickel concentrates — Sampling of slurries▷ISO 12739:2006 Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method▷ISO 12740:1998 Lead sulfide concentrates — Determination of silver and gold contents — Fire assay and flame atomic absorption spectrometric method using scorification or cupellation▷ISO 12742:2020 Copper, lead and zinc sulfide concentrates — Determination of transportable moisture limits — Flow-table method▷ISO 12743:2021 Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content▷ISO 12744:2006 Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling▷ISO 12745:2008 Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques□ ISO/TC 183 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/CD 11456 Copper and zinc sulfide concentrates — Determination of silver content — Acid digestion and flame atomic absorption or inductively coupled plasma emission spectrometric method▷ISO/AWI 12739 Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method▷ISO/CD 12744 Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling▷ISO/CD 13548 Copper, lead and zinc sulfide concentrates — Determination of fluorine content by sodium hydroxide fusion and fluoride ion selective electrode detection
-
[특집-기술위원회] TC 182 - 지반공학(Geotechnics)… 토양 및 암석의 특성을 포함해 건축 및 토목 공학 분야의 지반 공학적 측면의 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 등이 있다.ISO/TC 182 지반공학(Geotechnics)과 관련된 기술위원회는 1981년 결성됐다. 사무국은 영국 표준협회(British Standards Institution, BSI)에서 맡고 있다.위원회는 디드레 푸리(Miss Deidre Fourie)가 책임지고 있으며 현재 의장은 존 파웰(Mr John Powell)이다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 토양 및 암석의 (관련) 특성을 포함해 건축 및 토목 공학 분야의 지반 공학적 측면의 표준화다.현재 ISO/TC 182 사무국의 직접적인 책임 하에 발행된 표준은 58개며 ISO/TC 182 사무국의 직접적인 책임 하에 개발 중인 표준은 6개다. 참여하고 있는 회원은 25개국, 참관 회원은 31개국이다.□ ISO/TC 182 사무국의 직접적인 책임 하에 발행된 표준 58개 중 15개 목록▷ISO 14688-1:2017 Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description▷ISO 14688-2:2017 Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification▷ISO 14689:2017 Geotechnical investigation and testing — Identification, description and classification of rock▷ISO 17628:2015 Geotechnical investigation and testing — Geothermal testing — Determination of thermal conductivity of soil and rock using a borehole heat exchanger▷ISO 17892-1:2014 Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content▷ISO 17892-1:2014/Amd 1:2022 Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content — Amendment 1▷ISO 17892-2:2014 Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of bulk density▷ISO 17892-3:2015 Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination of particle density▷ISO 17892-4:2016 Geotechnical investigation and testing — Laboratory testing of soil — Part 4: Determination of particle size distribution▷ISO 17892-5:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental loading oedometer test▷ISO 17892-6:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 6: Fall cone test▷ISO 17892-7:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined compression test▷ISO 17892-8:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 8: Unconsolidated undrained triaxial test▷ISO 17892-9:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 9: Consolidated triaxial compression tests on water saturated soils▷ISO 17892-10:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests□ ISO/TC 182 사무국의 직접적인 책임 하에 개발 중인 표준 6개 목록▷ISO/AWI 16383-1 Geotechnical investigation and testing — Laboratory testing of rock — Part 1: Determination of water content▷ISO/AWI 16383-2 Geotechnical investigation and testing — Laboratory testing of rock — Part 2: Determination of bulk density▷ISO/DIS 18674-7 Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 7: Measurement of strains: Strain gauges▷ISO/AWI 18674-9 Geotechnical investigation and testing -Geotechnical monitoring by field instrumentation — Part 9: Measurement of displacements by geodetic means▷ISO 22476-16 Geotechnical investigation and testing — Field testing — Part 16: Borehole shear test▷ISO/WD 22477-6 Geotechnical investigation and testing — Testing of geotechnical structures — Part 6: Load testing of soil nails and rock bolts
-
[특집-기술위원회] TC 180 - 태양에너지(Solar energy)… 공간 및 물 난방, 냉방, 산업 공정 난방, 공조 분야에서 태양 에너지 활용의 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 등이 있다.ISO/TC 180 태양에너지(Solar energy)와 관련된 기술위원회는 1980년 결성됐다. 사무국은 오스트레일리아 표준협회(Standards Australia, SA)에서 맡고 있다.위원회는 에란디 찬드라세카레(Ms Erandi Chandrasekare)가 책임지고 있으며 현재 의장은 코르비니안 크라머(Mr Dr Korbinian Kramer)이며 임기는 2026년까지다.ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등으로 조사됐다.범위는 공간 및 물 난방, 냉방, 산업 공정 난방, 공조 분야에서 태양 에너지 활용의 표준화다. 또한 태양 에너지 측정 및 태양 측정에 사용되는 장비 및 절차에 대한 표준 개발이 포함된다.현재 ISO/TC 180 사무국과 관련해 발행된 표준은 21개며 ISO/TC 180 사무국의 직접적인 책임 하에 발행된 표준은 10개다. ISO/TC 180 사무국과 관련해 개발 중인 표준은 4개며 ISO/TC 180 사무국의 직접적인 책임 하에 개발 중인 표준은 1개다. 참여하고 있는 회원은 26개국, 참관 회원은 46개국이다.□ ISO/TC 180 사무국의 직접적인 책임 하에 발행된 표준 10개 목록▷ISO 9488:2022 Solar energy — Vocabulary▷ISO 9553:1997 Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors▷ISO 9806:2017 Solar energy — Solar thermal collectors — Test methods▷ISO 9808:1990 Solar water heaters — Elastomeric materials for absorbers, connecting pipes and fittings — Method of assessment▷ISO/TR 10217:1989 Solar energy — Water heating systems — Guide to material selection with regard to internal corrosion▷ISO 22975-1:2016 Solar energy — Collector components and materials — Part 1: Evacuated tubes — Durability and performance▷ISO 22975-2:2016 Solar energy — Collector components and materials — Part 2: Heat-pipes for solar thermal application — Durability and performance▷ISO 22975-3:2014 Solar energy — Collector components and materials — Part 3: Absorber surface durability▷ISO 22975-4:2023 Solar energy — Collector components and materials — Part 4: Glazing material durability and performance▷ISO 22975-5:2019 Solar energy — Collector components and materials — Part 5: Insulation material durability and performance□ ISO/TC 180 사무국의 직접적인 책임 하에 개발 중인 표준 1개 목록▷ISO/CD 9806 Solar energy — Solar thermal collectors — Test methods□ ISO/TC 180 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 180/SC 1 Climate - Measurement and data ; 발행된 표준 6개, 개발 중인 표준 2개▷ISO/TC 180/SC 4 Systems - Thermal performance, reliability and durability ; 발행된 표준 5개, 개발 중인 표준 1개
-
[특집-기술위원회] TC 178 - 리프트·에스컬레이터·무빙워크(Lifts·escalators·moving walks)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 등이 있다.ISO/TC 178 리프트, 에스컬레이터, 무빙워크(Lifts, escalators and moving walks)와 관련된 기술위원회는 TC 176과 마찬가지로 1979년 결성됐다. 사무국은 프랑스 표준화기구(Association Française de Normalization, AFNOR)에서 맡고 있다.위원회는 에바 콘티발(Mme Eva Contival)가 책임지고 있으며 현재 의장은 게로 그슈벤트너(Dr Gero Gschwendtner)다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등으로 조사됐다.범위는 리프트, 서비스 리프트, 승객용 컨베이어, 유사 장치 등의 안전을 포함해 모든 사양의 표준화다. 단 지속적인 기계적 취급 장비 및 광산 리프트는 제외한다.현재 ISO/TC 178 사무국의 직접적인 책임 하에 발행된 표준은 43개며 ISO/TC 178 사무국의 직접적인 책임 하에 개발 중인 표준은 15개다. 참여하고 있는 회원은 31개국, 참관 회원은 27개국이다.□ ISO/TC 178 사무국의 직접적인 책임 하에 발행된 표준 43개 중 15개 목록▷ISO 4190-2:2001 Lift (US: Elevator) installation — Part 2: Class IV lifts▷ISO 4190-3:1982 Passenger lift installations — Part 3: Service lifts class V▷ISO 4190-5:2006 Lift (Elevator) installation — Part 5: Control devices, signals and additional fittings▷ISO 8100-1:2019 Lifts for the transport of persons and goods — Part 1: Safety rules for the construction and installation of passenger and goods passenger lifts▷ISO 8100-2:2019 Lifts for the transport of persons and goods — Part 2: Design rules, calculations, examinations and tests of lift components▷ISO/TS 8100-3:2019 Lifts for the transport of persons and goods — Part 3: Requirements from other Standards (ASME A17.1/CSA B44 and JIS A 4307-1/JIS A 4307-2) not included in ISO 8100-1 or ISO 8100-2▷ISO 8100-20:2018 Lifts for the transport of persons and goods — Part 20: Global essential safety requirements (GESRs)▷ISO/TS 8100-21:2018 Lifts for the transport of persons and goods — Part 21: Global safety parameters (GSPs) meeting the global essential safety requirements (GESRs)▷ISO/TR 8100-24:2016 Safety requirements for lifts (elevators) — Part 24: Convergence of lift requirements▷ISO 8100-30:2019 Lifts for the transport of persons and goods — Part 30: Class I, II, III and VI lifts installation▷ISO 8100-32:2020 Lifts for the transportation of persons and goods — Part 32: Planning and selection of passenger lifts to be installed in office, hotel and residential buildings▷ISO 8100-33:2022 Lifts for the transport of persons and goods — Part 33: T-type guide rails for lift cars and counterweights▷ISO 8100-34:2021 Lifts for the transport of persons and goods — Part 34: Measurement of lift ride quality▷ISO 8102-1:2020 Electrical requirements for lifts, escalators and moving walks — Part 1: Electromagnetic compatibility with regard to emission▷ISO 8102-2:2021 Electrical requirements for lifts, escalators and moving walks — Part 2: Electromagnetic compatibility with regard to immunity□ ISO/TC 178 사무국의 직접적인 책임 하에 개발 중인 표준 15개 목록▷ISO/DIS 8100-1 Lifts for the transport of persons and goods — Part 1: Safety rules for the construction and installation of passenger and goods passenger lifts▷ISO/DIS 8100-2 Lifts for the transport of persons and goods — Part 2: Design rules, calculations, examinations and tests of lift components▷ISO/AWI 8100-7 Lifts for the transport of persons and goods — Part 7: Accessibility to lifts for persons including persons with disability▷ISO/WD TS 8100-10 Lifts for the transport of persons and goods — Part 10: Building Information Modelling▷ISO/CD TS 8100-22 Lifts for the transport of persons and goods — Part 22: Prerequisites for certification of conformity of lift systems, lift components and lift functions within conformity assessment procedures▷ISO/CD TS 8100-23 Lifts for the transport of persons and goods — Part 23: Certification and accreditation requirements within conformity assessment procedures▷ISO/CD TR 8101-10 Fire safety on lifts — Part 10: Comparison of worldwide safety standards on lifts for firefighters▷ISO/AWI 8102-1 Electrical requirements for lifts, escalators and moving walks — Part 1: Electromagnetic compatibility with regard to emissions▷ISO/AWI 8102-2 Electrical requirements for lifts, escalators and moving walks — Part 2: Electromagnetic compatibility with regard to immunity▷ISO/WD TS 8102-21 Electrical requirements for lifts, escalators and moving walks — Part 21: Part 21: On-site and off-site software updates▷ISO/DIS 8103-1 Escalators and moving walks — Part 1: Safety requirements▷ISO/WD TS 8103-3 Escalators and moving walks — Part 3: Part 3: Requirements from other Standards (ASME A17.1/CSA B44 and JIS codes) not included in ISO▷ISO/AWI 8103-9 Escalators and moving walks — Part 9: Measurement of ride quality▷ISO/DTR 25741-1 Lifts and escalators subject to seismic conditions — Compilation report — Part 1: Rule by rule comparison▷ISO/DTR 25741-2 Lifts and escalators subject to seismic conditions — Compilation report — Part 2: Abbreviated comparison and comments
-
[특집-ISO/IEC JTC 1/SC 17 활동] 23. Result of voting on ISO/IEC 7810/FDAM 12023년 11월24일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'Result of voting on ISO/IEC 7810/FDAM 1' 관련된 문서를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서인 'Result of voting on ISO/IEC 7810/FDAM 1'는 'Identification cards — Physical characteristics — Amendment 1: Additional requirements for integrated circuit cards with contacts(신분증 - 물리적 특성 - 수정안 1: 접점이 있는 IC(집적회로) 카드에 대한 추가 요구 사항)' 의 투표 결과에 대한 내용이다.투표는 2023년 9월20일부터 2023년 11월15일까지 진행됐으며 P-Member 18개국이 참여해 모두 찬성했다. ISO/IEC 7810/FDAM 1은 의장국을 포함해 총 19개국이 찬성해 승인됐다. - 이하 생략 -
-
[특집-기술위원회] TC 176 - 품질관리 및 품질보증(Quality management and quality assurance)… 특정 부문 품질관리 표준화뿐만 아니라 일반 품질관리시스템 및 지원 기술과 같은 품질관리 분야의 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 등이 있다.ISO/TC 176 품질관리 및 품질보증(Quality management and quality assurance)과 관련된 기술위원회는 1979년 결성됐다. 사무국은 캐나다 표준위원회(Standards Council of Canada, SCC)에서 맡고 있다.위원회는마크 슈슬러(Mr Mark Schuessler)가 책임지고 있으며 현재 의장은 제프리 헌트(Mr Jeffrey Hunt)다. ISO 기술 프로그램 관리자는 호세 알코르타(Mr José Alcorta), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 ISO 기술 관리위원회의 요청에 따라 특정 부문 품질관리 표준화뿐만 아니라 일반 품질관리시스템 및 지원 기술과 같은 품질관리 분야의 표준화다.참고로 ISO/TC 176은 일반 품질시스템 표준의 무결성과 품질관리시스템 결과물에 대한 ISO/IEC 부문 정책의 효과적인 구현을 보장하기 위해 모든 ISO 및 IEC 기술 위원회에 자문 기능을 맡겼다.현재 ISO/TC 176 사무국과 관련해 발행된 표준은 23개며 ISO/TC 176 사무국의 직접적인 책임 하에 발행된 표준은 2개다.ISO/TC 176 사무국과 관련해 개발 중인 표준은 6개며 ISO/TC 176 사무국의 직접적인 책임 하에 개발 중인 표준은 1개다. 참여하고 있는 회원은 93개국, 참관 회원은 33개국이다.□ ISO/TC 176 사무국의 직접적인 책임 하에 발행된 표준 2개 목록▷ISO 18091:2019 Quality management systems — Guidelines for the application of ISO 9001 in local government▷ISO/TS 54001:2019 Quality management systems — Particular requirements for the application of ISO 9001:2015 for electoral organizations at all levels of government□ ISO/TC 176 사무국의 직접적인 책임 하에 개발 중인 표준 1개 목록▷ISO/CD 54002 Quality management systems - Guidelines for the application of ISO 9001 in police organizations□ ISO/TC 176 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 176/SC 1 Uniaxial testing ; 발행된 표준 1개, 개발 중인 표준 1개▷ISO/TC 176/SC 2 Quality systems ; 발행된 표준 6개, 개발 중인 표준 2개▷ISO/TC 176/SC 3 Supporting technologies ; 발행된 표준 14개, 개발 중인 표준 2개
-
[특집-기술위원회] TC 174 - 보석 및 귀금속(Jewellery and precious metals)… 번호 부여 시스템, 반지 크기, 귀금속 색상 및 코팅, 다이아몬드 등 주얼리스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 등도 포함된다.ISO/TC 174 보석 및 귀금속(Jewellery and precious metals)과 관련된 기술위원회는 TC 171, TC 172, TC 173과 마찬가지로 1978년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 페트라 비쇼프((FH) Petra Bischoff)가 책임지고 있으며 현재 의장은 조나단 조드리(Mr Jonathan Jodry)이며 임기는 2024년까지다.ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 빈센조 바주치(M Vincenzo Bazzucchi) 등으로 조사됐다.범위는 번호 부여 시스템, 반지 크기, 귀금속 색상 및 코팅, 다이아몬드 등 주얼리 분야와 분석, 샘플링, 불순물 등 귀금속 분야 표준화다.현재 ISO/TC 174 사무국의 직접적인 책임 하에 발행된 표준은 21개며 ISO/TC 173 사무국의 직접적인 책임 하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 19개국, 참관 회원은 25개국이다.□ ISO/TC 174 사무국의 직접적인 책임 하에 발행된 표준 21개 중 15개 목록▷ISO 5724:2023 Jewellery and precious metals — Determination of very high purity gold — Difference method using ICP-MS▷ISO 8653:2016 Jewellery — Ring-sizes — Definition, measurement and designation▷ISO 8654:2018 Jewellery — Colours of gold alloys — Definition, range of colours and designation▷ISO 8654:2018/Amd 1:2019 Jewellery — Colours of gold alloys — Definition, range of colours and designation — Amendment 1▷ISO 9202:2019 Jewellery and precious metals — Fineness of precious metal alloys▷ISO 10713:1992 Jewellery — Gold alloy coatings▷ISO 11210:2023 Jewellery and precious metals — Determination of platinum — Gravimetry using ammonium chloride▷ISO 11426:2021 Jewellery and precious metals — Determination of gold — Cupellation method (fire assay)▷ISO 11427:2014 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide▷ISO 11490:2023 Jewellery and precious metals — Determination of palladium — Gravimetry using dimethylglyoxime▷ISO 11494:2019 Jewellery and precious metals — Determination of platinum in platinum alloys — ICP-OES method using an internal standard element▷ISO 11495:2019 Jewellery and precious metals — Determination of palladium in palladium alloys — ICP-OES method using an internal standard element▷ISO 11596:2021 Jewellery and precious metals — Sampling of precious metals and precious metal alloys▷ISO 13756:2015 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride▷ISO 15093:2020 Jewellery and precious metals — Determination of high purity gold, platinum and palladium — Difference method using ICP-OES□ ISO/TC 174 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/PRF 6893 Jewellery and precious metals — Inspection of batches of small diamonds — Terminology, classification and test methods▷ISO/DIS 10713 Jewellery and precious metals — Gold alloy coatings▷ISO/PRF 11427 Jewellery and precious metals — Determination of silver — Potentiometry using potassium bromide▷ISO/PRF 13756 Jewellery and precious metals — Determination of silver — Potentiometry using sodium chloride or potassium chloride▷ISO/DIS 18214 Jewellery and precious metals — Determination of high purity gold, silver, platinum and palladium — Difference method using SPARK-OES▷ISO/AWI 19376-1 Jewellery and precious metals — Vocabulary — Part 1: Precious metals and units▷ISO/CD 19919 Jewellery and precious metals — Determination of silver — ICP-OES method using an internal standard element▷ISO/AWI 21261-1 Jewellery and precious metals — Responsible precious metals — Part 1: General requirements for responsible precious metals▷ISO/AWI 21261-2 Jewellery and precious metals — Responsible precious metals — Part 2: Minimum rules and procedures for conformity assessment schemes▷ISO/AWI 21261-3 Jewellery and precious metals — Responsible precious metals — Part 3: Requirements for recycled gold