검색결과
-
[특집-기술위원회] TC 229 나노기술(Nanotechnologies)... 나노기술 분야 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 등도 포함된다.그리고 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 △1998년 TC 215~218 △1999년 TC 219, TC 220 △2000년 TC 221, TC 222 △2001년 TC 224 △2002년 TC 225 △2004년 TC 226 TC 227 등이 있다.ISO/TC 229 나노기술(Nanotechnologies)과 관련된 기술위원회는 TC 228과 마찬가지로 2005년 결성됐다. 사무국은 영국 표준협회(British Standards Institution, BSI)에서 맡고 있다.위원회는 데이비드 마이클(Dr David Michael)가 책임지고 있다. 현재 의장은 데니스 콜초프(Dr Denis Koltsov)로 임기는 2024년까지다. ISO 기술 프로그램 관리자는 몬자 코르터(Ms Monja Korter)이며 ISO 편집 관리자는 타이나 비셰비치(Ms Tajna Biscevic)이다.범위는 다음 하나 또는 둘 모두를 포함한 나노기술 분야 표준화다. 첫 번째는 일반적으로 크기 의존 현상이 시작되어 새로운 응용이 가능해지는 하나 이상의 차원에서 100나노미터 미만 나노 규모의 물질과 프로세스를 이해하고 제어하는 것이다.두번째는 새로운 특성을 활용해 개선된 물질, 장치 및 시스템을 만들기 위해 개별 원자, 분자 및 벌크 물질의 특성과 다른 나노 규모 재료의 특성을 활용 하는 것이다.특정 작업에는 용어 및 명명법, 기준 물질에 대한 사양을 포함한 계량 및 계측, 테스트 방법론, 모델링 및 시뮬레이션, 과학에 기반한 건강, 안전, 환경 실행과 같은 표준 개발이 포함된다. 현재 ISO/TC 228 사무국의 직접적인 책임 하에 발행된 표준은 56개며 ISO/TC 228 사무국의 직접적인 책임 하에 개발 중인 표준은 12개다. 참여하고 있는 회원은 58개국, 참관 회원은 47개국이다.□ ISO/TC 228 사무국의 직접적인 책임 하에 발행된 표준 56개 중 15개 목록▷ISO/TS 4958:2024 Nanotechnologies — Vocabulary — Liposomes▷ISO/TS 4971:2023 Nanotechnologies — Performance evaluation of nanosuspensions containing clay nanoplates for quorum quenching▷ISO/TS 4988:2022 Nanotechnologies — Toxicity assessment and bioassimilation of manufactured nano-objects in suspension using the unicellular organism Tetrahymena sp.▷ISO/TS 5094:2023 Nanotechnologies — Assessment of peroxidase-like activity of metal and metal oxide nanoparticles▷ISO/TS 5387:2023 Nanotechnologies — Lung burden mass measurement of nanomaterials for inhalation toxicity tests▷ISO/TS 7833:2024 Nanotechnologies — Extraction method of nanomaterials from lung tissue by proteinase K digestion▷ISO/TS 10689:2023 Nanotechnologies — Superhydrophobic surfaces and coatings: Characteristics and performance assessment▷ISO/TS 10797:2012 Nanotechnologies — Characterization of single-wall carbon nanotubes using transmission electron microscopy▷ISO/TS 10798:2011 Nanotechnologies — Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis▷ISO 10801:2010 Nanotechnologies — Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method▷ISO 10808:2010 Nanotechnologies — Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing▷ISO/TS 10818:2023 Nanotechnologies — Textiles containing nanomaterials and nanostructures — Superhydrophobic characteristics and durability assessment▷ISO/TS 10867:2019 Nanotechnologies — Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy▷ISO/TS 10868:2017 Nanotechnologies — Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy▷ISO/TR 10929:2012 Nanotechnologies — Characterization of multiwall carbon nanotube (MWCNT) samples□ ISO/TC 228 사무국의 직접적인 책임 하에 개발중인 표준 12개 목록▷ISO/FDIS 4962 Nanotechnologies — In vitro acute nanoparticle phototoxicity assay▷ISO/AWI TS 4963 Nanotechnologies — Radiotelemetry-spectral-echocardiography based real-time surveillance protocol for in vivo toxicity detection and monitoring of engineered nanomaterials (ENM)▷ISO/AWI TS 4966 Nanotechnologies — Nanostructured porous silica microparticles for chromatography▷ISO/AWI TS 5341 Nanotechnologies — Nomenclature — Part 1: General nomenclature▷ISO/AWI TS 9651 'Nanotechnologies — Classification framework for graphene‐related 2D materials▷ISO/AWI 11308 Nanotechnologies — Characterization of carbon nanotube samples using thermogravimetric analysis▷ISO/CD TS 11353 Nanotechnologies — Test method for detection of nano-object release from respiratory masks media under different working conditions▷ISO/AWI TS 12769 Nanotechnologies — Toxicity assessment of manufactured nanomaterials in soils using plant Arabidopsis thaliana▷ISO/TS 12901-1 Nanotechnologies — Occupational risk management applied to engineered nanomaterials — Part 1: Principles and approaches▷ISO/CD TS 12901-2 Nanotechnologies — Occupational risk management applied to engineered nanomaterials — Part 2: Use of the control banding approach▷ISO/AWI TS 12948 Nanotechnologies — Nanocomposite materials for insulating — Specification of characteristics and measurement methods▷ISO/AWI TS 13121 Nanotechnologies — Nanomaterial risk evaluation▷ISO/DTS 13329 Nanomaterials — Preparation of safety data sheets (SDS)▷ISO/AWI TS 18196 Nanotechnologies — Measurement technique matrix for the characterization of nano-objects▷ISO/DTS 19590 Nanotechnologies — Characterization of nano-objects using single particle inductively coupled plasma mass spectrometry
-
[특집-기술위원회] TC 220 - 극저온 용기(Cryogenic vessels)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 △1998년 TC 215~218 등이 있다.ISO/TC 220 극저온 용기(Cryogenic vessels)와 관련된 기술위원회는 TC 219와 마찬가지로 1999년 결성됐다. 사무국은 프랑스 표준화기구(Association Française de Normalization, AFNOR)에서 맡고 있다.위원회는 도니아 베니더(Mme Donia Benider)가 책임지고 있다. 현재 의장은 루시앙 바라시(M Lucien Varrassi)이며 임기는 2026년 말까지다. ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 발레리아 아가넨노네(Ms Valeria Agamennone) 등이다.범위는 UN(United Nations)의 위험물 운송에 관한 권장사항(모델 규정) 클래스 2의 냉동 액화가스 저장 및 운송을 위한 절연 용기(진공 또는 비진공) 분야 표준화다.특히 용기 및 안전 부속품의 설계, 가스/재료 호환성, 절연 성능, 장비 및 부속품의 작동 요구 사항에 관한 표준화다.현재 ISO/TC 220 사무국의 직접적인 책임 하에 발행된 표준은 25개며 ISO/TC 220 사무국의 직접적인 책임 하에 개발 중인 표준은 11개다. 참여하고 있는 회원은 12개국, 참관 회원은 20개국이다.□ ISO/TC 220 사무국의 직접적인 책임 하에 발행된 표준 25개 중 15개 목록▷ISO 12991:2012 Liquefied natural gas (LNG) — Tanks for on-board storage as a fuel for automotive vehicles▷ISO 20421-1:2019Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing▷ISO 20421-1:2019/Amd 1:2022 Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing — Amendment 1▷ISO 20421-2:2017 Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 2: Operational requirements▷ISO 21009-1:2022 Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests▷ISO 21009-2:2015 Cryogenic vessels — Static vacuum insulated vessels — Part 2: Operational requirements▷ISO 21010:2017 Cryogenic vessels — Gas/material compatibility▷ISO 21011:2008 Cryogenic vessels — Valves for cryogenic service▷ISO 21012:2018 Cryogenic vessels — Hoses▷ISO 21013-1:2021 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 1: Reclosable pressure-relief valves▷ISO 21013-2:2007 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 2: Non-reclosable pressure-relief devices▷ISO 21013-2:2007/Amd 1:2018 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 2: Non-reclosable pressure-relief devices — Amendment 1▷ISO 21013-3:2016 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 3: Sizing and capacity determination▷ISO 21013-4:2012 Cryogenic vessels — Pilot operated pressure relief devices — Part 4: Pressure-relief accessories for cryogenic service▷ISO 21013-4:2012/Amd 1:2019 Cryogenic vessels — Pilot operated pressure relief devices — Part 4: Pressure-relief accessories for cryogenic service — Amendment 1□ ISO/TC 220 사무국의 직접적인 책임 하에 개발 중인 표준 11개 목록▷ISO/CD 20421-1 Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing▷ISO/DIS 21009-1 Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests▷ISO/DIS 21009-2 Cryogenic vessels — Static vacuum insulated vessels — Part 2: Operational requirements▷ISO/AWI 21010 Cryogenic vessels — Gas/material compatibility▷ISO 21012 Cryogenic vessels — Hoses▷ISO 21013-1:2021/FDAmd 1 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 1: Reclosable pressure-relief valves — Amendment 1▷ISO/DIS 21013-2 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 2: Non-reclosable pressure-relief devices▷ISO/CD 21013-3 Cryogenic vessels — Pressure-relief accessories for cryogenic service — Part 3: Sizing and capacity determination▷ISO/DIS 21028-1 Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees °C▷ISO/AWI 21029-1 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests▷ISO/DIS 24490 Cryogenic vessels — Centrifugal pumps for cryogenic service
-
[특집-기술위원회] TC 218 - 목재(Timber)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 등이 있다.ISO/TC 218 목재(Timber)와 관련된 기술위원회는 TC 215, TC 216, TC 217과 마찬가지로 1998년 결성됐다. 사무국은 우크라이나 표준화센터(Ukrainian Scientific Research and Training Center for Standardization, Certification and Quality Problems, UkrNDNC)에서 맡고 있다.위원회는 옥사나 삭(Mrs Oksana Sak)이 책임지고 있다. 현재 의장은 올렉시 치칠리아노(Mr Oleksii Tsytsyliano)이며 임기는 2025년 말까지다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 빈센조 바주치(M Vincenzo Bazzucchi) 등이다.범위는 용어, 사양 및 테스트 방법을 포함해 모든 용도에 사용되는 원형 목재, 제재목 및 가공 목재와 목재 재료의 표준화다. 단, ISO/TC 165 목재 구조물에 포함된 목재의 용도는 제외한다.현재 ISO/TC 218 사무국의 직접적인 책임 하에 발행된 표준은 53개며 ISO/TC 218 사무국의 직접적인 책임 하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 23개국, 참관 회원은 40개국이다.□ ISO/TC 218 사무국의 직접적인 책임 하에 발행된 표준 53개 중 15개 목록▷ISO 631:1975 Mosaic parquet panels — General characteristics▷ISO 737:1975 Coniferous sawn timber — Sizes — Methods of measurement▷ISO 1029:1974 Coniferous sawn timber — Defects — Classification▷ISO 1030:1975 Coniferous sawn timber — Defects — Measurement▷ISO 1031:1974 Coniferous sawn timber — Defects — Terms and definitions▷ISO 1072:1975 Solid wood parquet — General characteristics▷ISO 2036:1976 Wood for manufacture of wood flooring — Symbols for marking according to species▷ISO 2299:1973 Sawn timber of broadleaved species — Defects — Classification▷ISO 2300:1973 Sawn timber of broadleaved species — Defects — Terms and definitions▷ISO 2301:1973 Sawn timber of broadleaved species — Defects — Measurement▷ISO 3129:2019 Wood — Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens▷ISO 4470:1981 Sawn timber — Determination of the average moisture content of a lot▷ISO 4471:1982 Wood — Sampling sample trees and logs for determination of physical and mechanical properties of wood in homogeneous stands▷ISO 4472:1983 Coniferous and broadleaved sawn timber — Transportation packages▷ISO 4475:1989 Coniferous and broadleaved tree sawlogs — Visible defects — Measurement□ ISO/TC 218 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록▷ISO/CD 13061-15 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 15: Determination of radial and tangential swelling▷ISO/CD 13061-16 Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 16: Determination of volumetric swelling
-
[특집-기술위원회] TC 210 - 의료기기를 포함한 건강 목적 제품의 품질 관리 및 이에 상응하는 일반적인 측면(Quality management and corresponding general aspects for products with a health purpose including medical devices스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 등이 있다.ISO/TC 210 의료기기를 포함한 건강 목적 제품의 품질 관리 및 이에 상응하는 일반적인 측면(Quality management and corresponding general aspects for products with a health purpose including medical devices)과 관련된 기술위원회는 1994년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 아미르 어바우탈레브(Mr Amir Aboutaleb)가 책임지고 있다. 현재 의장은 스콧 A. 콜번(Mr Scott A. Colburn)이며 임기는 2025년말까지다. ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등이다.범위는 액체 및 가스용 커넥터를 포함하는 건강 목적의 제품에 대한 품질 관리 및 상응하는 일반적인 측면과 관련한 분야의 요구 사항 및 지침에 관한 표준화다.단, △ISO/TC 176에서 다루는 일반 품질 관리 표준 △의약품 및 의료 서비스에 대한 품질 관리 표준은 제외한다.참고로 건강 목적의 제품에는 의료 기기, 인접 제품(또는 액세서리라고도 할 수 있음) 및 의료 기기와 유사한 위험 프로필을 가진 제품을 포함해 건강과 관련된 사용을 위한 제품이 포함된다.현재 ISO/TC 210 사무국의 직접적인 책임 하에 발행된 표준은 30개며 ISO/TC 210 사무국의 직접적인 책임 하에 개발 중인 표준은 13개다. 참여하고 있는 회원은 39개국, 참관 회원은 28개국이다.□ ISO/TC 210 사무국의 직접적인 책임 하에 발행된 표준 30개 중 15개 목록▷ISO 13485:2016 Medical devices — Quality management systems — Requirements for regulatory purposes▷ISO 14971:2019 Medical devices — Application of risk management to medical devices▷ISO 15223-1:2021 Medical devices — Symbols to be used with information to be supplied by the manufacturer — Part 1: General requirements▷ISO 15223-2:2010 Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation▷ISO 18250-1:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 1: General requirements and common test methods▷ISO 18250-3:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 3: Enteral applications▷ISO 18250-6:2019 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 6: Neural applications▷ISO 18250-7:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 7: Connectors for intravascular infusion▷ISO 18250-8:2018 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 8: Citrate-based anticoagulant solution for apheresis applications▷ISO/TR 20416:2020 Medical devices — Post-market surveillance for manufacturers▷ISO 20417:2021 Medical devices — Information to be supplied by the manufacturer▷ISO/TR 24971:2020 Medical devices — Guidance on the application of ISO 14971▷IEC 62304:2006 Medical device software — Software life cycle processes▷IEC 62304:2006/Amd 1:2015 Medical device software — Software life cycle processes — Amendment 1▷IEC 62366-1:2015 Medical devices — Part 1: Application of usability engineering to medical devices□ ISO/TC 210 사무국의 직접적인 책임 하에 개발 중인 표준 13개 목록▷ISO/WD TS 5137 Medical device maintenance management for healthcare delivery organizations▷ISO 15223-1:2021/AWI Amd 1 Medical devices — Symbols to be used with information to be supplied by the manufacturer — Part 1: General requirements — Amendment 1▷ISO/AWI 15223-2 Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation▷ISO/AWI 18250-3 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 3: Enteral applications▷ISO 18250-8:2018/AWI Amd 1 Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 8: Citrate-based anticoagulant solution for apheresis applications — Amendment 1▷ISO/CD 20417 Medical devices — Information to be supplied by the manufacturer▷ISO/AWI 23421 Medical devices — Terminology — Terms used in the field of quality management and corresponding general aspects for products with a health purpose including medical devices▷ISO/CD TS 24971-2 Medical devices — Guidance on the application of ISO 14971 — Part 2: Machine learning in artificial intelligence▷ISO/DIS 80369-1 Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements▷ISO/FDIS 80369-2 Small-bore connectors for liquids and gases in healthcare applications — Part 2: Connectors for respiratory applications▷IEC/AWI 80369-5 Small-bore connectors for liquids and gases in healthcare applications — Part 5: Connectors for limb cuff inflation applications▷ISO/DIS 80369-6 Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neural applications▷ISO/FDIS 80369-20 Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods
-
[특집-기술위원회] TC 206 - 파인 세라믹(Fine ceramics)… 모든 형태의 파인 세라믹 재료 및 제품 분야 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 등이 있다.ISO/TC 206 파인 세라믹(Fine ceramics)과 관련된 기술위원회는 TC 204, TC 205와 마찬가지로 1992년 결성됐다. 사무국은 일본 산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 히로유키 미야자키(Dr Hiroyuki Miyazaki)가 책임지고 있다. 현재 의장은 이희수 교수(Prof Heesoo Lee)가 맡고 있다.ISO 기술 프로그램 관리자는 츄안유 추(Ms Chuanyu Zou), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등이다.범위는 모든 형태의 파인 세라믹 재료 및 제품 분야 표준화다. 기계, 열, 화학, 전기, 자기, 광학 및 이들의 조합을 포함한 특정 기능 응용 분야를 위한 분말, 단일체, 코팅 및 복합재 등 모든 형태를 포함하고 있다. 파인 세라믹이라는 용어는 특정 기능적 특성을 지닌 고도로 가공된 고성능, 주로 비금속 무기 재료로 정의된다.참고로 파인 세라믹의 대체 용어는 고급 세라믹, 엔지니어링 세라믹, 테크니컬 세라믹 또는 고성능 세라믹이다. 파인 세라믹(Fine ceramics)은 절연체·내열재·구조재로 쓸수 있도록 고도기술로 개발된 새로운 세라믹을 말한다.현재 ISO/TC 206 사무국의 직접적인 책임 하에 발행된 표준은 156개며 ISO/TC 206 사무국의 직접적인 책임하에 개발 중인 표준은 32개다. 참여하고 있는 회원은 13개국, 참관 회원은 22개국이다.□ ISO/TC 206 사무국의 직접적인 책임 하에 발행된 표준 156개 중 15개 목록▷ISO 3169:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in aluminium oxide powders using inductively coupled plasma-optical emission spectrometry▷ISO 3180:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of calcium-phosphate-based powders for non-biomedical applications▷ISO 4825-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for thermal property measurements of metalized ceramic substrates — Part 1: Evaluation of thermal resistance for use in power modules▷ISO 5189:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of metal impurities in silicon dioxide powders using inductively coupled plasma-optical emission spectrometry▷ISO 5618-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for GaN crystal surface defects — Part 1: Classification of defects▷ISO 5712:2022 Fine ceramics (advanced ceramics, advanced technical ceramics) — Method for measuring the power generation characteristics of piezoelectric resonant devices for stand-alone power sources▷ISO 5722:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining tensile and shear creep of ceramic adhesive▷ISO 5803:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determination of monoclinic phase in zirconia▷ISO/TS 6857:2024 Fine ceramics (advanced ceramics, advanced technical ceramics) — Physical properties of ceramic composites — Guidelines for determination of void and fibre contents in polished cross section by image analysis▷ISO 10676:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen▷ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testing semiconducting photocatalytic materials▷ISO 10678:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue▷ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes▷ISO 13124:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for interfacial bond strength of ceramic materials▷ISO 13125:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for antifungal activity of semiconducting photocatalytic materials□ ISO/TC 206 사무국의 직접적인 책임 하에 개발 중인 표준 32개 중 15개 목록▷ISO/CD 4255 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic matrix composites at high temperature — Determination of axial tensile properties of tubes▷ISO/AWI 4825-2 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for thermal property measurements of metalized ceramic substrates — Part 2: Evaluation of heat transfer characteristics for metalized ceramics substrate for power modules▷ISO/PRF 5618-2 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for GaN crystal surface defects — Part 2: Method for determining etch pit density▷ISO/CD 5770 Fine ceramics (advanced ceramics, advanced technical ceramics) — Relative method for determining thermal conductivity of ceramic coatings▷ISO/DIS 10678 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue▷ISO/AWI 10820 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet irradiation equipment using UV-A LEDs and optical radiometry for performance test of semiconducting photocatalytic materials▷ISO/DIS 14544 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of compressive properties▷ISO/DIS 14574 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of tensile properties▷ISO/CD 14705 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature▷ISO/WD 15733 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties▷ISO/AWI 17138 Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength▷ISO/AWI 17561 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for dynamic elastic moduli of monolithic ceramics at room temperature by sonic resonance and Impulse Excitation Technique (IET)▷ISO/CD 17590 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of tests for reinforcements — Determination of the tensile properties of ceramic filaments at elevated temperature in air using the hot grip technique▷ISO/AWI 17947-1 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders — Part 1: Wet chemical methods, X-ray fluorescence (XRF) using the fused cast-bead method, carrier-gas hot extraction (CGHE) and combustion methods▷ISO/AWI 18719 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in yttrium oxide powders using inductively coupled plasma-optical emission spectrometry
-
[특집-기술위원회] TC 205 - 건축 환경 디자인(Building environment design)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 등이 있다.ISO/TC 205 건축 환경 디자인(Building environment design)과 관련된 기술위원회는 TC 204와 마찬가지로 1992년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 라이언 섄리(Mr Ryan Shanley)가 책임지고 있다. 현재 의장은 드레이크 에르베(Mr Drake Erbe)이며 임기는 2025년말 까지다.ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등이다.범위는 수용 가능한 실내 환경 및 실행 가능한 에너지 절약, 효율성을 위해 신규 건물의 설계 및 기존 건물 개조에 관한 표준화다.건축 환경 설계는 기술적 건축 시스템 및 관련 건축 측면을 다루며 관련 설계 프로세스, 설계 방법, 설계 결과 및 설계 단계 건물 커미셔닝을 포함하고 있다. 실내 환경에는 공기질과 열, 음향, 시각적 요소가 포함된다. 다음 내용들도 표준화에 포함된다.세부적으로 보면 △건물 설계 및 기존 건물 개조 설계에서 다룰 수 있는 실내 환경 품질 및 에너지와 관련된 지속 가능성 측면 △건축 환경 설계의 일반 원칙 △에너지 효율적인 건물 설계 △건물 및 개조 설계의 건물 자동화 및 제어 시스템 △건물 및 개조 설계의 실내 공기질 △건물의 실내 열 환경 및 개조 설계 △건물 및 개조 설계의 실내 음향 환경 △건물의 실내 시각적 환경 및 개조 설계 △복사를 포함한 냉난방 시스템 설계 △새 건물 및 개조 설계에 건물 환경 장비의 성능을 테스트하고 평가하는 방법의 적용 등이다.전체적인 접근 방식을 사용하는 ISO/TC163/WG4 공동 작업 그룹 TC 163 및 TC 205 에너지 성능 ISO/TC163/WG4 Joint working group TC 163 & TC 205 Energy performance)을 통해 ISO/TC 163과의 긴밀한 협력을 통해 건물 개조 뿐 아니라 신규 및 기존 건물의 에너지 성능에 관한 전체적인 평가의 표준화도 포함된다.표준화에는 △용어 및 정의 △건물 및 기술 시스템의 시스템 경계 △건축 요소의 에너지 성능을 고려한 건물의 전반적인 에너지 성능 평가 △건물 관련 시스템(난방, 냉방, 가정용 온수, 환기, 조명, 시스템 제어, 운송 및 기타 에너지 관련 시스템) △실내 및 실외 조건 △지역 에너지 생산(현장 및 지역 수준) △(사용) 에너지원(재생 가능 포함) △건물 커미셔닝 △전반적인 에너지 효율 평가 △건축물의 에너지 성능 및 에너지 성능 인증을 나타내는 수단 등이 있다.다만 △기타 인체공학적 요인 △대기 오염물질과 열, 음향 및 조명 특성을 측정하는 방법 △건축 환경의 열 성능 및 에너지 사용(ISO TC 163) △기존 건물의 건물 환경 장비 성능 및 등급을 테스트하는 방법 △기존 건물을 검사하거나 평가 △건설 등은 제외한다.현재 ISO/TC 205 사무국의 직접적인 책임 하에 발행된 표준은 49개며 ISO/TC 205 사무국의 직접적인 책임하에 개발 중인 표준은 10개다. 참여하고 있는 회원은 26개국, 참관 회원은 34개국이다.□ ISO/TC 205 사무국의 직접적인 책임 하에 발행된 표준 49개 중 15개 목록▷ISO 11855-1:2021 Building environment design — Embedded radiant heating and cooling systems — Part 1: Definitions, symbols, and comfort criteria▷ISO 11855-1:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 1: Definitions, symbols, and comfort criteria — Amendment 1▷ISO 11855-2:2021 Building environment design — Embedded radiant heating and cooling systems — Part 2: Determination of the design heating and cooling capacity▷ISO 11855-2:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 2: Determination of the design heating and cooling capacity — Amendment 1▷ISO 11855-3:2021 Building environment design — Embedded radiant heating and cooling systems — Part 3: Design and dimensioning▷ISO 11855-3:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 3: Design and dimensioning — Amendment 1▷ISO 11855-4:2021 Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS)▷ISO 11855-4:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) — Amendment 1▷ISO 11855-5:2021 Building environment design — Embedded radiant heating and cooling systems — Part 5: Installation▷ISO 11855-5:2021/Amd 1:2023 Building environment design — Embedded radiant heating and cooling systems — Part 5: Installation — Amendment 1▷ISO 11855-6:2018 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 6: Control▷ISO 11855-6:2018/Amd 1:2023 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 6: Control — Amendment 1▷ISO 11855-7:2019 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 7: Input parameters for the energy calculation▷ISO 11855-7:2019/Amd 1:2024 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 7: Input parameters for the energy calculation — Amendment 1▷ISO 11855-8:2023 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 8: Electrical heating systems□ ISO/TC 205 사무국의 직접적인 책임 하에 개발 중인 표준 10개 목록▷ISO/TR 5863 Integrative design of the building envelope — General principles▷ISO/DIS 16484-2 Building automation and control systems (BACS) — Part 2: Hardware▷ISO/DIS 16484-4 Building automation and control systems (BACS) — Part 4: Control applications▷ISO/DIS 16813 Building environment design — Indoor environment — General principles▷ISO/WD 20734 Building Enviroment Design — Daylighting design procedure for indoor visual environment▷ISO/WD 21075 Design and assessment process of whole-building mechanical ventilation systems in residential buildings▷ISO/WD 22511-1 Design process of ventilative cooling systems — Part 1: Non-residential buildings▷ISO/AWI TS 23764 Methodology for achieving non-residential zero-energy buildings (ZEBs)▷ISO/CD 24359-1 Building commissioning process planning — Part 1: New buildings▷ISO/AWI TR 52032-2 Energy performance of buildings — Energy requirements and efficiencies of heating, cooling and domestic hot water (DHW) distribution systems — Part 2: Explanation and justification of ISO 52032-1
-
[특집-기술위원회] TC 204 - 지능형 교통시스템(Intelligent transport systems)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 등이 있다.ISO/TC 204 지능형 교통시스템(Intelligent transport systems)과 관련된 기술위원회는 1992년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 제니퍼 콜린스(Ms Jennifer Collins)가 책임지고 있다. 현재 의장은 쿠로시 올리아이(Mr Koorosh Olyai)이며 임기는 2025년말 까지다.ISO 기술 프로그램 관리자는 하킴 음킨시(Mr Hakim Mkinsi), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등이다.범위는 도시 및 농촌 지상 교통 분야의 정보, 통신 및 제어 시스템 표준화다. 표준화에는 인터모달 및 멀티모달 측면, 여행자 정보, 교통 관리, 대중 교통, 상업 교통, 긴급 서비스, 지능형 교통 시스템(intelligent transport systems, ITS) 분야 상업 서비스 등을 포함하고 있다. 단, 차량 내 운송 정보 및 제어 시스템(ISO/TC 22)은 제외한다.참고로 ISO/TC 204는 지능형 교통 시스템(ITS)의 전반적인 시스템 측면과 인프라 측면을 담당하고 있다. 기존 국제 표준화 기관의 작업을 고려한 표준 개발 일정을 포함해 이 분야의 전반적인 ISO 작업 프로그램을 조정하고 있다.현재 ISO/TC 204 사무국의 직접적인 책임 하에 발행된 표준은 338개며 ISO/TC 204 사무국의 직접적인 책임하에 개발 중인 표준은 67개다. 참여하고 있는 회원은 33개국, 참관 회원은 28개국이다.□ ISO/TC 204 사무국의 직접적인 책임 하에 발행된 표준 338개 중 15개 목록▷ISO 4272:2022 Intelligent transport systems — Truck platooning systems (TPS) — Functional and operational requirements▷ISO 4273:2024 Intelligent transport systems — Automated braking during low-speed manoeuvring (ABLS) — Requirements and test procedures▷ISO/TR 4286:2021 Intelligent transport systems — Use cases for sharing of probe data▷ISO/TS 4398:2022 Intelligent transport systems — Guided transportation service planning data exchange▷ISO 4426:2021 Intelligent transport systems — Lower layer protocols for usage in the European digital tachograph▷ISO/TR 4445:2021 Intelligent transport systems — Mobility integration — Role model of ITS service application in smart cities▷ISO/TR 4447:2022 Intelligent transport systems — Mobility integration — Comparison of two mainstream integrated mobility concepts▷ISO/TS 5206-1:2023 Intelligent transport systems — Parking — Part 1: Core data model▷ISO/TS 5255-1:2022 Intelligent transport systems — Low-speed automated driving system (LSADS) service — Part 1: Role and functional model▷ISO/TR 5255-2:2023 Intelligent transport systems — Low-speed automated driving system (LSADS) service — Part 2: Gap analysis▷ISO 5345:2022 Intelligent transport systems — Identifiers▷ISO/TR 6026:2022 Electronic fee collection — Pre-study on the use of vehicle licence plate information and automatic number plate recognition (ANPR) technologies▷ISO/TR 7872:2022 Intelligent transport systems — Mobility integration — Digital infrastructure service role and functional model for urban ITS service applications▷ISO/TR 7878:2023Intelligent transport systems — Mobility integration — Enterprise view▷ISO 10711:2012 Intelligent Transport Systems — Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors□ ISO/TC 204 사무국의 직접적인 책임 하에 개발 중인 표준 67개 중 15개 목록▷ISO/CD TR 4448-1 Intelligent transport systems — Public-area Mobile Robots (PMR) — Part 1: Overview of paradigm▷ISO/AWI TS 4448-16 Intelligent transport systems — Public-area Mobile Robots (PMR) — Part 16: 16▷ISO/AWI TS 5087-3 Information technology — City data model — Part 3: Service level concepts -Transportation planning▷ISO/CD TR 6029-1.2 Intelligent transport systems — Seamless positioning for multimodal transportation in ITS stations — Part 1: General information and use case definition▷ISO/AWI 6029-2 Intelligent transport systems — Seamless positioning for multimodal transportation in ITS stations — Part 2: Nomadic and mobile device dataset for positioning data fusion▷ISO/DTS 7815-1 Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 1: Secure vehicle interface framework and architecture▷ISO/DTS 7815-2 Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 2: Specification of the secure vehicle interface▷ISO/CD 7856 Intelligent transport systems —Remote support for low speed automated driving systems (RS-LSADS) —Performance requirements, system requirements and performance test procedures▷ISO/AWI TR 7874-1 Intelligent transport systems — Mobility integration multimodal pricing — Part 1: Framework▷ISO/AWI 12768-1 Intelligent transport systems — Automated Valet Driving Systems (AVDS) — Part 1: Part 1: Requirements, System Framework, Communication Interfaces and Test Procedures▷ISO/AWI 12768-2 Intelligent transport systems — Automated Valet Driving Systems (AVDS) — Part 2: Part 2: System framework, security procedures and requirements▷ISO/CD TR 12786 Intelligent transport systems — Big data and artificial intelligence supporting intelligent transport systems — Use cases▷ISO 12813 Electronic fee collection — Compliance check communication for autonomous systems▷ISO/AWI 12855 Electronic fee collection — Information exchange between service provision and toll charging▷ISO/AWI 13140 Electronic fee collection -– Conformity evaluation of on-board and roadside equipment to ISO 13141
-
KTC-KCL-한양대, 탄소중립건축인증기관 업무협약 체결KTC, KCL, 한양대학교가 탄소중립건축인증제 운영에 손을 맞잡았다. 한국기계전기전자시험연구원(KTC)은 한국건설생활시험연구원(KCL), 한양대학교와 함께 한양대 에리카(ERICA) 본관 프라임컨퍼런스홀에서 탄소중립건축인증기관 지정·구성을 위한 업무협약을 체결했다고 28일 밝혔다. 탄소중립건축인증(ZCB; Zero Carbon Building Certification)은 건물 전과정 탄소배출량·감축량의 정량적 평가로 건축물의 탄소저감 성능을 인증하는 민간제도다. 이날 협약식에는 최현정 KTC 탄소중립·환경사업본부장, 이봉춘 KCL 건설본부 스마트건설재료센터장, 태성호 한양대 탄소중립스마트건축센터장 등이 참석했다. 업계에 따르면 건축물은 탄소감축 가치사슬의 관점에서 전 산업과 연관성이 높은 분야로, 이에 대한 전과정 탄소배출량 평가 및 감축의 중요성은 대두돼 왔지만, 이를 위한 인증 시스템이 부재했다. 3개 기관은 이번 협약을 통해 ▲탄소중립건축인증 심사 ▲제도개선 및 활성화 방안 마련 ▲인증운영위원회 참여 및 기술협력 ▲인력양성 교육 등 공동사업 추진을 위한 교류 및 협업 체계를 구축할 것을 약속했습다. 안성일 KTC 원장은 “KTC는 탄소중립건축인증 공신력을 확보하기 위한 제도 단체표준 인정을 계획하고 있다”며 “전문인력 양성지원, 저탄소 기술 공동연구 등으로 탄소중립 건축인증이 건물부문 국가 온실가스 감축목표 달성에 기여하도록 지원하겠다”고 말했다. KTC는 지난해 산업부에서 공모한 ‘청정수소 인증시험평가기관’에 선정돼 올해부터 관련 사업을 수행하는 등 다양한 산업에서 탄소배출량 MRV 업무영역을 확대해 나가고 있다. 향후에는 신축, 기존, 리모델링 건물을 대상으로 전과정 생애주기 동안의 탄소배출량·감축량을 평가하고, 건물 환경성과 거주성을 동시에 고려한 건물 설계를 지원할 예정이다.
-
[특집-기술위원회] TC 197 - 수소 기술(Hydrogen technologies)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 △1988년 TC 192~TC 194 △1989년 TC 195 등이 있다.ISO/TC 197 수소 기술(Hydrogen technologies)과 관련된 기술위원회는 1990년 결성됐다. 사무국은 캐나다 표준위원(Standards Council of Canada, SCC)에서 맡고 있다.위원회는 시아시아 모렐(Mr Siasia Morel)가 책임지고 있다. 현재 의장은 이케다 테츠후미(Mr Tetsufumi IKEDA)이며 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 키르시 실란데르-반 후넨(Mrs Kirsi Silander-van Hunen), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil)등이다. 범위는 수소 생산, 저장, 운송, 측정 및 사용을 위한 시스템 및 장치 분야의 표준화다.현재 ISO/TC 197 사무국과 관련해 발행된 표준은 19개며 ISO/TC 197 사무국의 직접적인 책임 하에 발행된 표준은 18개다.ISO/TC 197 사무국과 관련해 개발 중인 표준은 22개며 ISO/TC 197 사무국의 직접적인 책임 하에 개발 중인 표준은 21개다. 참여하고 있는 회원은 35개국, 참관 회원은 18개국이다.□ ISO/TC 197 사무국의 직접적인 책임 하에 발행된 표준 18개 중 15개 목록▷ISO 13984:1999 Liquid hydrogen — Land vehicle fuelling system interface▷ISO 13985:2006 Liquid hydrogen — Land vehicle fuel tanks▷ISO 14687:2019 Hydrogen fuel quality — Product specification▷ISO/TR 15916:2015 Basic considerations for the safety of hydrogen systems▷ISO 16110-1:2007 Hydrogen generators using fuel processing technologies — Part 1: Safety▷ISO 16110-2:2010 Hydrogen generators using fuel processing technologies — Part 2: Test methods for performance▷ISO 16111:2018 Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride▷ISO 17268:2020 Gaseous hydrogen land vehicle refuelling connection devices▷ISO 19880-1:2020 Gaseous hydrogen — Fuelling stations — Part 1: General requirements▷ISO 19880-3:2018 Gaseous hydrogen — Fuelling stations — Part 3: Valves▷ISO 19880-5:2019 Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies▷ISO 19880-8:2019 Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control▷ISO 19880-8:2019/Amd 1:2021 Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control — Amendment 1: Alignment with Grade D of ISO 14687▷ISO 19881:2018 Gaseous hydrogen — Land vehicle fuel containers▷ISO 19882:2018 Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers□ ISO/TC 197 사무국의 직접적인 책임 하에 개발 중인 표준 21개 중 15개 목록▷ISO/WD 13984 Liquid Hydrogen Land Vehicle Fueling Protocol▷ISO/AWI 13985 Liquid hydrogen — Land vehicle fuel tanks▷ISO/DIS 14687 Hydrogen fuel quality — Product specification▷ISO/DIS 17268-1 Gaseous hydrogen land vehicle refuelling connection devices — Part 1: Flow capacities up to and including 120 g/s▷ISO/AWI 17268-2 Gaseous hydrogen land vehicle refuelling connection devices — Part 2: Part 2: Flow capacities greater than 120 g/s▷ISO/AWI 17268-3 Gaseous hydrogen land vehicle refuelling connection devices — Part 3: Cryo-compressed hydrogen gas▷ISO/DIS 19880-2 Gaseous hydrogen — Fuelling stations — Part 2: Dispensers and dispensing systems▷ISO/CD 19880-5 Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies▷ISO/DIS 19880-7 Gaseous hydrogen — Fuelling stations — Part 7: Rubber O-rings▷ISO/DIS 19880-8 Gaseous hydrogen — Fuelling stations — Part 8: Fuel quality control▷ISO/DIS 19880-9 Gaseous hydrogen — Fuelling stations — Part 9: Sampling for fuel quality analysis▷ISO/AWI TS 19880-10 Gaseous hydrogen — Fuelling stations — Part 10: Mobile fueling stations▷ISO/DIS 19881 Gaseous hydrogen — Land vehicle fuel containers▷ISO/DIS 19882 Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers▷ISO/AWI 19884-1 Gaseous Hydrogen - Pressure vessels for stationary storage — Part 1: Part 1: general requirements□ ISO/TC 197 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 197/SC 1 Hydrogen at scale and horizontal energy systems ; 발행된 표준 1개, 개발 중인 표준 1개
-
[특집-기술위원회] TC 194 - 의료 장비의 생물학적 및 임상적 평가(Biological and clinical evaluation of medical devices)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186 △1984년 TC 188 △1985년 TC 189, TC 190, TC 191 등이 있다.ISO/TC 194 의료 장비의 생물학적 및 임상적 평가(Biological and clinical evaluation of medical devices)와 관련된 기술위원회는 TC 192, TC 193과 마찬가지로 1988년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 수잔 민크위츠(Mrs Dr Susann Minkwitz)가 책임지고 있다. 현재 의장은 제레미 팅클러(Mr Jeremy Tinkler)이며 임기는 2026년 말까지다. ISO 기술 프로그램 관리자는 패트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 산잘리 자인(Ms Sanjali Jain)등이다.범위는 해당 장치의 인간 임상 조사에 대한 우수 임상 실습 원칙 뿐 아니라 해당 재료 및 장치에 적용 가능한 생물학적 테스트 방법과 함께 의료 및 치과 재료 및 장치의 생물학적 및 임상 평가에 대한 접근 방식의 표준화다.현재 ISO/TC 194 사무국의 직접적인 책임 하에 발행된 표준은 37개 ISO/TC 194 사무국의 직접적인 책임 하에 개발 중인 표준은 16개다. 참여하고 있는 회원은 33개국, 참관 회원은 19개국이다.□ ISO/TC 194 사무국의 직접적인 책임 하에 발행된 표준 37개 중 15개 목록▷ISO 10993-1:2018 Biological evaluation of medical devices — Part 1: Evaluation and testing within a risk management process▷ISO 10993-2:2022 Biological evaluation of medical devices — Part 2: Animal welfare requirements▷ISO 10993-3:2014 Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity▷ISO 10993-4:2017 Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood▷ISO 10993-5:2009 Biological evaluation of medical devices — Part 5: Tests for in vitro cytotoxicity▷ISO 10993-6:2016 Biological evaluation of medical devices — Part 6: Tests for local effects after implantation▷ISO 10993-7:2008 Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals▷ISO 10993-7:2008/Amd 1:2019 Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals — Amendment 1: Applicability of allowable limits for neonates and infants▷ISO 10993-7:2008/Cor 1:2009 Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals — Technical Corrigendum 1▷ISO 10993-9:2019 Biological evaluation of medical devices — Part 9: Framework for identification and quantification of potential degradation products▷ISO 10993-10:2021 Biological evaluation of medical devices — Part 10: Tests for skin sensitization▷ISO 10993-11:2017 Biological evaluation of medical devices — Part 11: Tests for systemic toxicity▷ISO 10993-12:2021 Biological evaluation of medical devices — Part 12: Sample preparation and reference materials▷ISO 10993-13:2010 Biological evaluation of medical devices — Part 13: Identification and quantification of degradation products from polymeric medical devices▷ISO 10993-14:2001 Biological evaluation of medical devices — Part 14: Identification and quantification of degradation products from ceramics□ ISO/TC 194 사무국의 직접적인 책임 하에 개발 중인 표준 16개 목록▷ISO/CD 8250 Cleanliness of medical devices — Process design and test methods▷ISO/CD 10993-1.2 Biological evaluation of medical devices — Part 1: Requirements and general principles for the evaluation of biological safety within a risk management process▷ISO/AWI 10993-2 Biological evaluation of medical devices — Part 2: Animal welfare requirements▷ISO/AWI 10993-3 Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity▷ISO 10993-4:2017/DAmd 1 Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood — Amendment 1▷ISO/CD 10993-6 Biological evaluation of medical devices — Part 6: Tests for local effects after implantation▷ISO/CD 10993-7.2 Biological evaluation of medical devices — Part 7: Ethylene oxide sterilization residuals▷ISO/CD 10993-11 Biological evaluation of medical devices — Part 11: Tests for systemic toxicity▷ISO 10993-12:2021/AWI Amd 1 Biological evaluation of medical devices — Part 12: Sample preparation and reference materials — Amendment 1▷ISO/AWI 10993-16 Biological evaluation of medical devices — Part 16: Toxicokinetic study design for degradation products and leachables▷ISO 10993-17:2023/AWI Amd 1 Biological evaluation of medical devices — Part 17: Toxicological risk assessment of medical device constituents — Amendment 1▷ISO 10993-23:2021/AWI Amd 1 Biological evaluation of medical devices — Part 23: Tests for irritation — Amendment 1▷ISO/CD 14155 Clinical investigation of medical devices for human subjects — Good clinical practice▷ISO/AWI 18969 Clinical evaluation of medical devices▷ISO/AWI 21762 Medical devices utilizing human tissues and their derivatives — Application of risk management▷ISO/AWI TR 24850 Sources of hazard information for medical device constituents