검색결과
-
[특집] ISO/TC 52 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 52 경량 게이지 금속 용기(Light gauge metal containers)와 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC48, TC51과 동일하게 1947년 구성됐다.사무국은 중국국가표준화관리위원회(Standardization Administration of China, SAC)에서 맡고 있다. 위원회는 카이 츄(Mr Kai QIU)이 책임진다. 의장은 티강 정(Mr Tiegang Zheng)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 스테판 소바(M Stéphane Sauvage), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 공칭 재료 두께가 0.49mm와 같거나 그 이상인 경량 게이지 금속 용기 분야의 표준화다. 현재 ISO/TC 52 사무국의 직접적인 책임하에 있는 발행된 표준은 11개며 ISO/TC 52 사무국의 직접적인 책임하에 개발 중인 표준은 1개다. 참여하고 있는 회원은 11명, 참관 회원은 26명이다.□ ISO/TC 52 사무국의 직접적인 책임하에 있는 표준 11개 목록▲ISO 90-1:1997 Light gauge metal containers — Definitions and determination of dimensions and capacities — Part 1: Open-top cans▲ISO 90-2:1997 Light gauge metal containers — Definitions and determination of dimensions and capacities — Part 2: General use containers▲ISO 90-3:2000 Light gauge metal containers — Definitions and determination of dimensions and capacities — Part 3: Aerosol cans▲ISO 1361:1997 Light-gauge metal containers — Round open-top cans — Internal diameters▲ISO 5099:2022 Light gauge metal containers — Easy-open ends and peel-off ends — Classification and dimensions▲ISO 10653:1993 Light-gauge metal containers — Round open-top cans — Cans defined by their nominal gross lidded capacities▲ISO 10654:1993 Light-gauge metal containers — Round open-top cans — Cans for liquid products with added gas, defined by their nominal filling volumes▲ISO/TR 11761:1992 Light-gauge metal containers — Round open-top cans — Classification of can sizes by construction type▲ISO/TR 11762:1992 Light-gauge metal containers — Round open-top cans for liquid products with added gas — Classification of can sizes by construction type▲ISO/TS 21985:2022 Light gauge metal containers — Non-refillable LPG cartridges — General requirements▲ISO 24021-1:2022 Light gauge metal containers — Vocabulary and classification — Part 1: Open-top cans and ends□ ISO/TC 52 사무국의 직접적인 책임하에 개발중인 표준 1개 목록▲ISO/DIS 24021-2 Light gauge metal containers — Vocabulary and classification — Part 2: General cans
-
[특집] ISO/TC 51 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 51 자재 취급의 단위 적재 방식용 팔레트(Pallets for unit load method of materials handling) 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC48과 동일하게 1947년 구성됐다.사무국은 영국표준협회(British Standards Institution, BSI)에서 맡고 있다. 위원회는 페타르 루자이(Mr Petar Luzajic)이 책임진다. 의장은 엄재균(Dr Jae-Kyun Eom)으로 임기는 2027년까지다.ISO 기술 프로그램 관리자는 블란디네 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 기계 장치로 취급하기 위한 단위 적재를 형성하기 위해 포장할 수 있는 플랫폼 또는 트레이 형태로 일반적으로 사용되는 팔레트의 표준화다.현재 ISO/TC 51 사무국의 직접적인 책임하에 있는 표준 또는 프로젝트는 16개며 참여하고 있는 회원은 21명, 참관 회원은 21명이다.□ ISO/TC 51 사무국의 직접적인 책임하에 있는 표준 16개 목록▲ISO 445:2013 Pallets for materials handling — Vocabulary▲ISO 6780:2003 Flat pallets for intercontinental materials handling — Principal dimensions and tolerances▲ISO 8611-1:2021 Pallets for materials handling — Flat pallets — Part 1: Test methods▲ISO 8611-2:2021 Pallets for materials handling — Flat pallets — Part 2: Performance requirements and selection of tests▲ISO 8611-3:2011 Pallets for materials handling — Flat pallets — Part 3: Maximum working loads▲ISO/TS 8611-4:2013 Pallets for materials handling — Flat pallets — Part 4: Procedure for predicting creep responses in stiffness tests for plastic pallets using regression analyses▲ISO 12776:2008 Pallets — Slip sheets▲ISO 12777-1:1994 Methods of test for pallet joints — Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples▲ISO 12777-1:1994/Amd 1:2008 Methods of test for pallet joints — Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples — Amendment 1▲ISO 12777-2:2000 Methods of test for pallet joints — Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples▲ISO 12777-3:2002 Methods of test for pallet joints — Part 3: Determination of strength of pallet joints▲ISO 13194:2011 Box pallets — Principal requirements and test methods▲ISO 15629:2002 Pallets for materials handling — Quality of fasteners for assembly of new and repair of used, flat, wooden pallets▲ISO 18333:2014 Pallets for materials handling — Quality of new wooden components for flat pallets▲ISO 18334:2010 Pallets for materials handling — Quality of assembly of new wooden pallets▲ISO 18613:2014 Pallets for materials handling — Repair of flat wooden pallets
-
[특집] ISO/TC 48 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 48 실험실 장비(Laboratory equipment) 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC47과 동일하게 1947년 구성됐다.사무국은 독일표준화연구소(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다. 위원회는 제니 블룸(Mrs Dipl.-Phys Jenny Blum)이 책임진다. 의장은 찰스 파스칼(Mr Charles Pascall)으로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등으로 조사됐다.범위는 원리와 구성 재료, 성능, 치수 및 테스트는 물론 이와 관련하여 사용되는 용어 및 정의와 관련한 실험 목적을 위한 장비나 가구의 표준화다.■ 다음 사항도 표준화 범위에 속한다. ▶ 실험실 용품, 장치, 전기 및 비전기 기기를 포함한 실험실 기기의 표준화▶ 벤치, 전문가 좌석, 실험실 보관 장치, 매체 공급 장치, 장금장치, 피팅 및 연기 찬장이 포함된 실험실 가구의 표준화■ 다음 사항은 ISO/TC 48 표준화 범위에서 제외된다. ▶ 전기 안전 및 전자파 적합성 뿐 아니라 개인의 안전 측면을 위해 구성된 기구 및 장비는 ISO/TC 48 범위에서 제외됨▶ ISO/TC 136의 범위에 포함된 일반 가구의 표준화는 제외됨.▶ 실험실 장비 통합의 표준화는 ISO/TC 48의 범위에서 제외됨.현재 ISO/TC 4의 직접적인 책임하에 개발된 표준은 83개, ISO/TC 48과 관련해 발행된 ISO 표준은 89개며 ISO/TC 48과 관련해 개발 중인 표준은 5개다. 참여하고 있는 회원은 19명, 참관 회원은 26명이다.□ ISO/TC 48 사무국의 직접적인 책임하에 발행된 표준 83개 중 15개 목록▲ISO 383:1976 Laboratory glassware — Interchangeable conical ground joints▲ISO 384:2015 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments▲ISO 385:2005 Laboratory glassware — Burettes▲ISO 641:1975 Laboratory glassware — Interchangeable spherical ground joints▲ISO 648:2008 Laboratory glassware — Single-volume pipettes▲ISO 695:1991 Glass — Resistance to attack by a boiling aqueous solution of mixed alkali — Method of test and classification▲ISO 718:1990 Laboratory glassware — Thermal shock and thermal shock endurance — Test methods▲ISO 835:2007 Laboratory glassware — Graduated pipettes▲ISO 1042:1998 Laboratory glassware — One-mark volumetric flasks▲ISO 1769:1975 Laboratory glassware — Pipettes — Colour coding▲ISO 1772:1975 Laboratory crucibles in porcelain and silica▲ISO 1773:1997 Laboratory glassware — Narrow-necked boiling flasks▲ISO 1775:1975 Porcelain laboratory apparatus — Requirements and methods of test▲ISO 1776:1985 Glass — Resistance to attack by hydrochloric acid at 100 degrees C — Flame emission or flame atomic absorption spectrometric method▲ISO 3585:1998 Borosilicate glass 3.3 — Properties□ ISO/TC 48 사무국의 직접적인 책임하에 개발 중인 표준 5개 목록▲ISO/CD TR 6037 Automated liquid handling systems – Uncertainty of the measurement procedures▲ISO/CD TS 6417 Microfluidic pumps — Symbols and performance communication▲ISO/DIS 8655-10 Piston-operated volumetric apparatus — Part 10: User guidance and requirements for competence, training, and POVA suitability▲ISO/FDIS 10991 Microfluidics — Vocabulary▲ISO 13132 Laboratory glassware — Petri dishes□ ISO/TC 48 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 48/SC 4 Density measuring instruments ; 발행된 표준 6개, 개발 중인 표준 0개
-
[특집] ISO/TC 47 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 47 화학(Chemistry) 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC46과 동일하게 1947년 구성됐다.사무국은 일본 공업 표준 조사위원회(Japanese Industrial Standards Committee, JISC)에서 맡고 있다. 위원회는 레이코 노나카(Ms Reiko Nonaka)가 책임진다. 의장은 히로시 나카무라(Ph.D Hiroshi Nakamura)로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 아룬 ABY 파라에카틸(Mr Arun ABY Paraecattil) 등이다.범위는 일반적으로 화학산업 분야의 표준화다. 특히 광범위하게 다른 산업에서 현재 사용되고 있고 ISO의 다른 기술위원회에서 다루지 않는 기본 화학 제품에 대한 표준화를 다루고 있다.현재 ISO/TC 47 사무국의 직접적인 책임하에 개발된 표준은 109개이며 ISO/TC 47 사무국의 직접적인 책임하에 개발 중인 표준은 5개다. 참여하고 있는 회원은 17명, 참관 회원은 42명이다.□ ISO/TC 47 사무국의 직접적인 책임하에 발행된 표준 15개 목록▲ISO 78-2:1999 Chemistry — Layouts for standards — Part 2: Methods of chemical analysis▲ISO 739:1976 Sodium carbonate for industrial use — Preparation and storage of test samples▲ISO 740:1976 Sodium carbonate for industrial use — Determination of total soluble alkalinity — Titrimetric method▲ISO 746:1976 Sodium carbonate for industrial use — Determination of matter insoluble in water at 50 degrees C▲ISO 756-1:1981 Propan-2-ol for industrial use — Methods of test — Part 1: General▲ISO 758:1976 Liquid chemical products for industrial use — Determination of density at 20 degrees C▲ISO 759:1981 Volatile organic liquids for industrial use — Determination of dry residue after evaporation on water bath — General method▲ISO 760:1978 Determination of water — Karl Fischer method (General method)▲ISO 904:1976 Hydrochloric acid for industrial use — Determination of total acidity — Titrimetric method▲ISO 910:1977 Sulphuric acid and oleum for industrial use — Determination of total acidity, and calculation of free sulphur trioxide content of oleum — Titrimetric method▲ISO 918:1983 Volatile organic liquids for industrial use — Determination of distillation characteristics▲ISO 979:1974 Sodium hydroxide for industrial use — Method of assay▲ISO 981:1973 Sodium hydroxide for industrial use — Determination of chloride content — Mercurimetric method▲ISO 1385-1:1977 Phthalate esters for industrial use — Methods of test — Part 1: General▲ISO 1388-1:1981 Ethanol for industrial use — Methods of test — Part 1: General□ ISO/TC 47 사무국의 직접적인 책임하에 개발 중인 표준 5개 목록▲ISO/PRF 7382 Ethylene for industrial use — Sampling in the liquid and the gaseous phase▲ISO/DIS 7431-1 Thiourea for industrial use — Part 1: Test methods▲ISO/DIS 7431-2 Thiourea for industrial use — Part 2: Specifications▲ISO/PRF 8563 Propylene and butadiene for industrial use — Sampling in the liquid phase▲ISO/WD 16294 Chemical recycling of organic materials — Organic recoverable resources and chemical recycled resources
-
[특집] ISO/TC 46 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 46 정보 및 문서(Information and documentation) 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC45와 동일하게 1947년 구성됐다.사무국은 프랑스 표준화협회(Association Française de Normalisation, AFNOR)에서 맡고 있다. 위원회는 헬렌 슈(Mme Hélène Xu)가 책임진다. 의장은 그레고리 미우라(Mr Gregory Miura)으로 임기는 2028년까지다.ISO 기술 프로그램 관리자는 패트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 마사사 카산토산(Mrs Martha Casantosan) 등으로 조사됐다.범위는 도서관, 문서 및 정보 센터, 출판, 기록 보관소, 기록 관리, 박물관 문서, 색인 및 요약 서비스, 정보 과학과 관련된 관행의 표준화다.현재 ISO/TC 46의 직접적인 책임하에 개발된 표준은 35개, ISO/TC 46과 관련해 발행된 ISO 표준은 128개다. ISO/TC 46의 직접적인 책임하에 개발 중인 표준은 4개며 ISO/TC 46과 관련해 개발 중인 표준은 20개다. 참여하고 있는 회원은 42명, 참관 회원은 32명이다.□ ISO/TC 46 사무국의 직접적인 책임하에 발행된 표준 15개 목록▲ISO 8:2019 Information and documentation — Presentation and identification of periodicals▲ISO 9:1995 Information and documentation — Transliteration of Cyrillic characters into Latin characters — Slavic and non-Slavic languages▲ISO 18:1981 Documentation — Contents list of periodicals▲ISO 214:1976 Documentation — Abstracts for publications and documentation▲ISO 215:1986 Documentation — Presentation of contributions to periodicals and other serials▲ISO 233-2:1993 Information and documentation — Transliteration of Arabic characters into Latin characters — Part 2: Arabic language — Simplified transliteration▲ISO 233-3:2023 Information and documentation — Transliteration of Arabic characters into Latin characters — Part 3: Persian language — Transliteration▲ISO 233:1984 Documentation — Transliteration of Arabic characters into Latin characters▲ISO 259-2:1994 Information and documentation — Transliteration of Hebrew characters into Latin characters — Part 2: Simplified transliteration▲ISO 259:1984 Documentation — Transliteration of Hebrew characters into Latin characters▲ISO 843:1997 Information and documentation — Conversion of Greek characters into Latin characters▲ISO 1086:1991 Information and documentation — Title leaves of books▲ISO 2145:1978 Documentation — Numbering of divisions and subdivisions in written documents▲ISO 2384:1977 Documentation — Presentation of translations▲ISO 3166-1:2020 Codes for the representation of names of countries and their subdivisions — Part 1: Country code□ ISO/TC 46 사무국의 직접적인 책임하에 개발중인 표준 4개 목록▲ISO 9:1995/DAmd 1 Information and documentation — Transliteration of Cyrillic characters into Latin characters — Slavic and non-Slavic languages — Amendment 1▲ISO/AWI 233-1 Documentation — Transliteration of Arabic characters into Latin characters — Part 1: Arabic language — Transliteration▲ISO/AWI 233-2 Information and documentation — Transliteration of Arabic characters into Latin characters — Part 2: Arabic language — Simplified transliteration▲ISO/AWI 5127 Information and documentation — Foundation and vocabulary□ ISO/TC 46 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 46/SC 4 Technical interoperability ; 발행된 표준 24개, 개발 중인 표준 5개▲ISO/TC 46/SC 8 Quality - Statistics and performance evaluation ; 발행된 표준 12개, 개발 중인 표준 2개▲ISO/TC 46/SC 9 Identification and description ; 발행된 표준 26개, 개발 중인 표준 2개▲ISO/TC 46/SC 10 Requirements for document storage and conditions for preservation ; 발행된 표준 12개, 개발 중인 표준 3개▲ISO/TC 46/SC 11 Archives/records management ; 발행된 표준 19개, 개발 중인 표준 4개
-
[스위스] 바록스코뮤니케이션, 환경 관리 시스템 국제 표준 ISO 14001 인증 획득스위스 미디어 컨버터 및 아이피 익스텐더( IP extenders) 제조업체 바록스코뮤니케이션(barox Kommunikation)에 따르면 환경 관리 시스템 국제 표준 ISO 14001 인증을 획득했다. 환경 관리 시스템 국제 표준 ISO 14001은 기업이 환경에 미치는 최상의 영향과 최악의 영향을 체계적으로 평가하고, 평가 결과를 바탕으로 지속적인 환경 개선 접근 방식을 비즈니스 구조 전반에 도입하도록 지원한다.바록스코뮤니케이션은 환경에 미치는 영향을 최소화하기 위한 절차를 검토하고 문서화한다. 환경 문제가 심각하게 고려되어야할 필요성이 있기 때문이다.이와 같이 프로세스를 최적화하면 비용을 절감할 수 있을 뿐만 아니라 사회 전체에도 환경 친화적인 방식을 도입할 수 있을 것으로 전망된다.환경 친화적인 방식을 도입하는 것은 고객에게 이익이 될 뿐만 아니라 사회적인 책무를 수행하기 때문이다. 환경 관리 시스템(EMS)을 성공적으로 구현하면 환경에 미치는 영향을 줄일 수 있다.
-
[특집] ISO/TC 45 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 45 고무 및 고무제품(Rubber and rubber products) 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC44와 동일하게 1947년 구성됐다.사무국은 말레이시아 표준부(Department of Standards Malaysia, DSM)에서 맡고 있다. 위원회는 샤룰 모드 타히르(Mr Shahrul Mohd Tahir)가 책임진다. 의장은 아미르 하심 맥 야팀(Dr Amir Hashim Md Yatim)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 마호 타카하시(Mme Maho Takahashi), ISO 편집 관리자는 ISO 편집팀(ISO Editing Team) 등으로 조사됐다.범위는 모든 형태의 고무, 고무 제품(치수 공차 포함) 및 주요 고무 배합 성분에 대한 생명 주기 동안 고무 제품에 의해 생성된 물질 또는 입자와 관련된 위험 평가를 수행하는데 필요한 것을 포함한 용어 및 정의 , 테스트 방법, 사양의 표준화다.ISO/TC 61과의 합의에 따라 고무 또는 플라스틱으로 만들어진 코팅된 직물, 유연한 셀룰러 재표, 신발, 호스는 ISO/TC45에서 다룬다.다른 TC가 사용자의 관심이 높은 특수 호스는 다른 위원회가 담당한다. 예를 들어 TC 22, 44, 67 및 131, TC 45는 관련 국제 표준을 제정 또는 개정하는 적절한 방법에 대해 관련 사용자 TC와 상호 합의해야 된다.■ 다음 모든 측면 제외:▶고무 벨트, ISO/TC 41에서 처리▶타이어, ISO / TC 31에서 처리▶특정 특수 제품, ISO / TC 131에서 다루는 고무 씰뿐 아니라 특히 ISO / TC 20, ISO / TC 22, ISO / TC 121 및 ISO / TC 157에서 다루는 제품 등현재 ISO/TC 45의 직접적인 책임하에 개발된 표준은 12개, ISO/TC 45와 관련해 발행된 ISO 표준은 444개다. ISO/TC 45의 직접적인 책임하에 개발중인 표준은 3개며 ISO/TC 45와 관련해 개발 중인 표준은 61개다. 참여하고 있는 회원은 29명, 참관 회원은 27명이다.□ ISO/TC 45 사무국의 직접적인 책임하에 발행된 표준 12개 목록▲ISO 1382:2020 Rubber — Vocabulary▲ISO 1629:2013 Rubber and latices — Nomenclature▲ISO 6472:2017 Rubber compounding ingredients — Abbreviated terms▲ISO 13507:2012 Rubber compounds, raw rubbers and compounding materials — Short terms for properties reported in certificates of analysis▲ISO 18064:2022 Thermoplastic elastomers — Nomenclature and abbreviated terms▲ISO/TR 21275:2017 Rubber — Comprehensive review of the composition and nature of process fumes in the rubber industry▲ISO/TS 21396:2017 Rubber — Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments — Pyrolysis-GC/MS method▲ISO/TS 21522:2017 Rubber process fumes components — Quantitative test methods▲ISO/TS 22638:2018 Rubber — Generation and collection of tyre and road wear particles (TRWP) — Road simulator laboratory method▲ISO/TS 22640:2018 Rubber — Framework for physical and chemical characterization of tyre and road wear particles (TRWP)▲ISO/TS 22687:2018 Rubber — Framework for assessing the environmental fate of tyre and road wear particles (TRWP)▲ISO/TR 24699:2009 Rubber and rubber products — Environmental aspects — General guidelines for their inclusion in standards□ ISO/TC 45 사무국의 직접적인 책임하에 개발중인 표준 3개 목록▲ISO/DIS 6472 Rubber compounding ingredients — Abbreviated terms▲ISO/DIS 22638 Rubber — Generation and collection of tyre and road wear particles (TRWP) — Road simulator laboratory method▲ISO/PRF 22640 Rubber — Framework for physical and chemical characterization of tyre and road wear particles (TRWP)□ ISO/TC 45 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발 중인 표준 현황▲ISO/TC 45/SC 1 Rubber and plastics hoses and hose assemblies ; 발행된 표준 78개, 개발 중인 표준 14개▲ISO/TC 45/SC 2 Testing and analysis ; 발행된 표준 124개, 개발 중인 표준 13개▲ISO/TC 45/SC 3 Raw materials (including latex) for use in the rubber industry ; 발행된 표준 125개, 개발 중인 표준 17개▲ISO/TC 45/SC 4 Products (other than hoses) ; 발행된 표준 105개, 개발 중인 표준 14개
-
한덕수 국무총리, 국제박람회기구(BIE) 실사단과 환송 만찬한덕수 국무총리는 4.6(목) 부산 누리마루 APEC 하우스에서 2030월드엑스포 개최 후보지 부산을 실사하기 위해 방한한 국제박람회기구(Bureau International des Expositions, 이하 “BIE”) 실사단과 환송만찬을 함께 했다. 이날 만찬에는 BIE실사단에 우리 대한민국의 엑스포 유치 의지와 열망을 전달하기 위해 부산엑스포 유치위원회 공동위원장인 한덕수 국무총리와 최태원 대한상의 회장을 비롯하여 산업부 장관, 해수부 장관, 대통령실 미래전략기획관, 유치위원회 사무총장, 부산시 경제부시장 등이 총출동하였다. 한 총리는 5박 6일의 실사 일정 간 대한민국 전역에서 2030 세계박람회 유치를 향한 뜨거운 열기를 충분히 느꼈을 것으로 기대한다며, 2030 부산세계박람회를 통해 대한민국이 기후변화·디지털격차 등 인류 공통의 위기 해결을 위한 솔루션을 제시하는 플랫폼 역할을 할 수 있기를 희망한다고 전했다. 한편, 이날 만찬은 실사단에게 익숙한 양식으로 제공됐다. 특히, 한국산 식재료를 접목시킨 메뉴로 구성되었으며, 실사단원 국적을 감안하여 그리스, 스위스산 와인이 제공되었다. * 하동 단호박 뇨끼, ‘언양’ 미나리 클램 폼, ‘대구’ 김치 피클 등 또한 축하공연에서는 부산 출신으로 부산국제클래식음악제의 수석부감독으로 활동 중인 한수진 바이올리니스트가 우리나라 대표곡인 ‘아리랑’을 연주하였다. BIE 실사단은 4.7(금) 5박 6일의 실사일정을 마치고 출국할 예정이다.
-
[특집] ISO/TC 44 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 44 용접 및 관련 공정(Welding and allied processes) 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41~TC43과 동일하게 1947년 구성됐다.사무국은 프랑스표준화협회(Association Française de Normalisation, AFNOR)에서 맡고 있다. 위원회는 로리 자델(Mme Laurie Jardel)가 책임진다. 의장은 가이 크로머(M Guy Cromer)로 임기는 2027년까지다.ISO 기술 프로그램 관리자는 메르세 페레스 에르난데츠(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 데이비드 리드(Mr David Reid) 등이다. 범위는 관련 공정뿐 아니라 모든 공정에서의 용접에 관한 표준화다.이 표준은 용어, 정의 및 도면의 용접 기효 표시, 용접 장비, 원자재(가스, 모재 및 용가재), 용접 프로세스 및 규칙, 테스트 및 제어 방법, 용접 어셈블리의 계산 및 설계, 안전 및 건강뿐 아니라 용접공의 자격 등을 포함하고 있다. 다만 IEC/TC 26의 책임이 있는 용접과 관련된 전기 안전 문제는 제외한다.현재 ISO/TC 44의 직접적인 책임하에 개발된 표준은 1개, ISO/TC 44와 관련해 발행된 ISO 표준은 321개다. ISO/TC 44의 직접적인 책임하에 개발중인 표준은 1개며 ISO/TC 44와 관련해 개발 중인 표준은 50개다. 참여하고 있는 회원은 27명, 참관 회원은 38명이다.□ ISO/TC 44 사무국의 직접적인 책임하에 발행된 표준 1개 목록▲ISO/TS 18166:2016 Numerical welding simulation — Execution and documentation□ ISO/TC 44 사무국의 직접적인 책임하에 개발중인 표준 1개 목록▲ISO/AWI TS 18166 Numerical welding simulation — Execution and documentation□ ISO/TC 44 사무국의 소위원회(Subcommittee)의 책임하에 발행 및 개발중인 표준 현황▲ISO/TC 44/SC 3 Welding consumables ; 발행된 표준 36개, 개발 중인 표준 9개▲ISO/TC 44/SC 5 Testing and inspection of welds ; 발행된 표준 38개, 개발 중인 표준 1개▲ISO/TC 44/SC 6 Resistance welding and allied mechanical joining ; 발행된 표준 62개, 개발 중인 표준 5개▲ISO/TC 44/SC 7 Representation and terms ; 발행된 표준 17개, 개발 중인 표준 2개▲ISO/TC 44/SC 8 Equipment for gas welding, cutting and allied processes ; 발행된 표준 26개, 개발 중인 표준 2개▲ISO/TC 44/SC 9 Health and safety ; 발행된 표준 16개, 개발 중인 표준 3개▲ISO/TC 44/SC 10 Quality management in the field of welding ; 발행된 표준 78개, 개발 중인 표준 16개▲ISO/TC 44/SC 11 Qualification requirements for welding and allied processes personnel ; 발행된 표준 12개, 개발 중인 표준 2개▲ISO/TC 44/SC 12 Soldering materials ; 발행된 표준 19개, 개발 중인 표준 4개▲ISO/TC 44/SC 13 Brazing materials and processes ; 발행된 표준 6개, 개발 중인 표준 3개▲ISO/TC 44/SC 14 Welding and brazing in aerospace ; 발행된 표준 7개, 개발 중인 표준 1개▲ISO/TC 44/SC 15 Underwater welding ; 발행된 표준 3개, 개발 중인 표준 1개
-
[특집] ISO/TC 43 기술위원회(Technical Committees) 소개스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC1~TC323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC1 기술위원회를 시작으로 최근 순환경제를 표준화하기 위한 TC323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.ISO/TC 43 음향시설(Acoustics) 관련 기술위원회는 TC1, TC2, TC4~TC6, TC8, TC10~TC12, TC14, TC17~TC22, TC24~31, TC33~TC39, TC41, TC42와 동일하게 1947년 구성됐다.사무국은 독일표준화협회(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다. 위원회는 아그네스 세이어(Mrs Dr Agnes Sayer)가 책임진다. 의장은 더글라스 맨벨(Mr Douglas Manvell)로 임기는 2024년까지다.ISO 기술 프로그램 관리자는 타마호 타카이(Ms Tamaho Takai), ISO 편집 관리자는 빈센조 바주치(M Vincenzo Bazzucchi) 등이다.범위는 음향 현상, 발생, 전송 및 수신, 인간과 환경에 미치는 모든 측면을 측정하는 방법을 포함한 음향시설 분야의 표준화다.현재 ISO/TC 43의 직접적인 책임하에 발행된 ISO 표준은 26개며 관련해 발행된 ISO 표준은 218개다. ISO/TC 43의 직접적인 책임하에 개발중인 표준은 4개며 관련해 개발 중인 표준은 30개다. 참여하고 있는 회원은 29명, 참관 회원은 32명이다.□ ISO/TC 43 사무국의 직접적인 책임하에 발행된 표준 26개 중 10개 목록▲ISO 16:1975 Acoustics — Standard tuning frequency (Standard musical pitch)▲ISO 226:2023 Acoustics — Normal equal-loudness-level contours▲ISO 266:1997 Acoustics — Preferred frequencies▲ISO 389-1:2017 Acoustics — Reference zero for the calibration of audiometric equipment — Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones▲ISO 389-2:1994 Acoustics — Reference zero for the calibration of audiometric equipment — Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones▲ISO 389-3:2016 Acoustics — Reference zero for the calibration of audiometric equipment — Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators▲ISO 389-4:1994 Acoustics — Reference zero for the calibration of audiometric equipment — Part 4: Reference levels for narrow-band masking noise▲ISO 389-5:2006 Acoustics — Reference zero for the calibration of audiometric equipment — Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz▲ISO 389-6:2007 Acoustics — Reference zero for the calibration of audiometric equipment — Part 6: Reference threshold of hearing for test signals of short duration▲ISO 389-7:2019 Acoustics — Reference zero for the calibration of audiometric equipment — Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions□ ISO/TC 43 사무국의 직접적인 책임하에 개발중인 표준 4개 목록▲ISO/DIS 532-3 Acoustics — Methods for calculating loudness — Part 3: Moore-Glasberg-Schlittenlacher method▲ISO/CD 1999 Acoustics — Estimation of noise-induced hearing loss▲ISO 7029:2017/CD Amd 1 Acoustics — Statistical distribution of hearing thresholds related to age and gender — Amendment 1▲ISO/CD 21388-2 Acoustics — Tele Hearing Aid Fitting Management — Part 2: Tele-services as part of hearing aid fitting management (tHAFM)