검색결과
-
[특집-기술위원회] TC 190 - 토양 품질(Soil quality)… 준설된 수중 토양 물질(굴착된 퇴적물)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186, △1984년 TC 188등이 있다.ISO/TC 190 토양 품질(Soil quality)과 관련된 기술위원회는 TC 189와 마찬가지로 1985년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 테레사 게스바인(Mrs Theresa Geßwein)이 책임지고 있다. 현재 의장은 냇 클라우스 리파르트(Mr Dr. rer. nat Klaus Liphard)이다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 발레리아 아가멤논(Ms Valeria Agamennone)등으로 조사됐다.범위는 토양 품질 분야의 표준화다. 원지 토양(원래의 토양), 준설된 수중 토양 물질(굴착된 퇴적물)을 포함해 토양 내 또는 토양 위에서 재사용하기 위한 토양 물질 등도 포함된다.단 토양 품질 평가를 위한 임계값 또는 한계값이나 ISO/TC 182 지질공학에서 다루고 있는 토목공학적 측면이나 ISO/TC 147 수질에서 다루고 있는 현장 퇴적물 등은 제외한다.현재 ISO/TC 190 사무국과 관련해 발행된 표준은 198개며 ISO/TC 190 사무국의 직접적인 책임 하에 발행된 표준은 16개다.ISO/TC 190 사무국과 관련해 개발된 표준은 16개며 ISO/TC 190 사무국의 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 31개국, 참관 회원은 30개국이다.□ ISO/TC 190 사무국의 직접적인 책임 하에 발행된 표준 16개 목록▷ISO 4974:2023 Soil quality — Guidance on soil temperature measurement▷ISO 11074:2015 Soil quality — Vocabulary▷ISO 11074:2015/Amd 1:2020 Soil quality — Vocabulary — Amendment 1▷ISO 11275:2004 Soil quality — Determination of unsaturated hydraulic conductivity and water-retention characteristic — Wind's evaporation method▷ISO 15709:2002 Soil quality — Soil water and the unsaturated zone — Definitions, symbols and theory▷ISO 15903:2002 Soil quality — Format for recording soil and site information▷ISO 16586:2003 Soil quality — Determination of soil water content as a volume fraction on the basis of known dry bulk density — Gravimetric method▷ISO 16586:2003/Cor 1:2009 Soil quality — Determination of soil water content as a volume fraction on the basis of known dry bulk density — Gravimetric method — Technical Corrigendum 1▷ISO 17312:2005 Soil quality — Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter▷ISO 17313:2004 Soil quality — Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter▷ISO 20951:2019 Soil Quality — Guidance on methods for measuring greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) fluxes between soils and the atmosphere▷ISO 23400:2021 Guidelines for the determination of organic carbon and nitrogen stocks and their variations in mineral soils at field scale▷ISO 23992:2022 Soil quality — Framework for detailed recording and monitoring of changes in dynamic soil properties▷ISO 25177:2019 Soil quality — Field soil description▷ISO 28258:2013 Soil quality — Digital exchange of soil-related data▷ISO 28258:2013/Amd 1:2019 Soil quality — Digital exchange of soil-related data — Amendment 1□ ISO/TC 190 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/DIS 11074 Soil quality — Vocabulary▷ISO/CD 18718 Assessment of soil functions and related-ecosystem services: definitions and conceptual Framework▷ISO/CD 18721 Assessment of ecological soil functions: indicators and methods▷ISO/AWI 21251 Guidance for estimating organic carbon stocks in soils according to their biogeochemical stability or or residence time□ ISO/TC 190 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 190/SC 3 Chemical and physical characterization ; 발행된 표준 87개, 개발 중인 표준 13개▷ISO/TC 190/SC 4 Biological characterization ; 발행된 표준 56개, 개발 중인 표준 9개▷ISO/TC 190/SC 7 Impact assessment ; 발행된 표준 39개, 개발 중인 표준 4개
-
[특집-기술위원회] TC 189 - 세라믹 타일(Ceramic tile)… 바닥재 및 벽면 마감재에 사용되는 세라믹 타일의 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186, △1984년 TC 188등이 있다.ISO/TC 189 세라믹 타일(Ceramic tile)과 관련된 기술위원회는 1985년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 존 P. 샌더스(Dr John P. Sanders)이 책임지고 있다. 현재 의장은 노아 치티(Mr Noah Chitty)이며 임기는 2024년까지다.ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 루시 커크(Ms Lucy Kirk)등으로 조사됐다. 범위는 일반적으로 바닥재 및 벽면 마감재에 사용되는 세라믹 타일의 표준화다.현재 ISO/TC 189 사무국의 직접적인 책임 하에 발행된 표준은 35개며 ISO/TC 189 사무국의 직접적인 책임 하에 개발 중인 표준은 12개다. 참여하고 있는 회원은 35개국, 참관 회원은 25개국이다.□ ISO/TC 189 사무국의 직접적인 책임 하에 발행된 표준 35개 중 15개 목록▷ISO 10545-1:2014 Ceramic tiles — Part 1: Sampling and basis for acceptance▷ISO 10545-2:2018 Ceramic tiles — Part 2: Determination of dimensions and surface quality▷ISO 10545-3:2018 Ceramic tiles — Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density▷ISO 10545-4:2019 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength▷ISO 10545-5:1996 Ceramic tiles — Part 5: Determination of impact resistance by measurement of coefficient of restitution▷ISO 10545-5:1996/Cor 1:1997 Ceramic tiles — Part 5: Determination of impact resistance by measurement of coefficient of restitution — Technical Corrigendum 1▷ISO 10545-6:2010 Ceramic tiles — Part 6: Determination of resistance to deep abrasion for unglazed tiles▷ISO 10545-7:1996 Ceramic tiles — Part 7: Determination of resistance to surface abrasion for glazed tiles▷ISO 10545-8:2014 Ceramic tiles — Part 8: Determination of linear thermal expansion▷ISO 10545-9:2013 Ceramic tiles — Part 9: Determination of resistance to thermal shock▷ISO 10545-10:2021 Ceramic tiles — Part 10: Determination of moisture expansion▷ISO 10545-11:1994 Ceramic tiles — Part 11: Determination of crazing resistance for glazed tiles▷ISO 10545-12:1995 Ceramic tiles — Part 12: Determination of frost resistance▷ISO 10545-12:1995/Cor 1:1997 Ceramic tiles — Part 12: Determination of frost resistance — Technical Corrigendum 1▷ISO 10545-13:2016 Ceramic tiles — Part 13: Determination of chemical resistance□ ISO/TC 189 사무국의 직접적인 책임 하에 개발 중인 표준 12개 목록▷ISO/CD 10545-22 Ceramic tiles — Part 22: Determination of resistance to wear with a multi-attribute method▷ISO/CD 10545-23 Ceramic tiles — Part 23: Determination of elastic modulus for substrates and glaze layer▷ISO/WD 10545-24 Ceramic tiles — Part 24: Tensile adhesion strength of multilayer tiles and tile adhesives▷ISO/AWI 10545-25 Ceramic tiles — Part 25: Determination of reverse staining resistance▷ISO/AWI 13007-1 Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives▷ISO/AWI 13007-3 Ceramic tiles — Grouts and adhesives — Part 3: Terms, definitions and specifications for grouts▷ISO/AWI 13007-7 Ceramic tiles — Grouts and adhesives — Part 7: Sound dampening materials for use beneath ceramic tiling bonded with adhesives — Requirements, test methods, evaluation of conformity, classification and designation▷ISO/AWI TR 17870-2 Ceramic tiles — Guidelines for installation — Part 2: Installation of thin ceramic wall and floor tiles and panels▷ISO/AWI 17889-3 Ceramic tiling systems — Sustainability for ceramic tiles and installation materials — Part 3: Guidelines for the application and verification of ISO 17889-1 and 17889-2▷ISO/WD 20355 Quantitative determination of antiviral activity of ceramic tile surfaces and survival of viruses on ceramic surfaces — Test methods — Ceramic tile surfaces with incorporated antiviral agents▷ISO/WD 20356 Quantitative determination of antifungal activity of ceramic tile surfaces — Test methods — Ceramic tile surfaces with incorporated antifungal agents▷ISO/WD 22267-1 Ceramic Tiling Systems — Embodied Carbon — Part 1: Calculation of Embodied Carbon of Ceramic Tile
-
[특집-기술위원회] TC 188 - 소형선박(Small craft)… 선체 길이가 최대 24미터인 레저 선박 및 유사한 장비를 사용하는 기타 소형 선박스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186등이 있다.ISO/TC 188 소형선박(Small craft)과 관련된 기술위원회는 1984년 결성됐다. 사무국은 스웨덴 국립표준청(Svenska institutet för standarder, SIS)에서 맡고 있다.위원회는 아네트 에릭슨(Ms Anette Eriksson)이 책임지고 있다. 현재 의장은 크레이그 숄튼(Mr Craig Scholten)이며 임기는 2026년까지다.ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández) ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 선체 길이가 최대 24미터인 레저 선박 및 유사한 장비를 사용하는 기타 소형 선박의 장비 및 구조 세부 사항의 표준화다. 단, ISO/TC 8이 다루고 있는 구명정 및 구명 장비는 제외한다.현재 ISO/TC 188 사무국과 관련해 발행된 표준은 96개며 ISO/TC 188 사무국의 직접적인 책임 하에 발행된 표준은 82개다.ISO/TC 188 사무국과 관련해 개발 중인 표준은 16개며 ISO/TC 188 사무국의 직접적인 책임 하에 개발 중인 표준은 12개다. 참여하고 있는 회원은 22개국, 참관 회원은 23개국이다.□ ISO/TC 188 사무국의 직접적인 책임 하에 발행된 표준 82개 중 15개 목록▷ISO 4566:1992 Small craft with inboard engine — Propeller shaft ends and bosses with 1:10 taper▷ISO 6017:2024 Small craft — Automatic watertight ventilation shutdown system▷ISO 6185-1:2001 Inflatable boats — Part 1: Boats with a maximum motor power rating of 4,5 kW▷ISO 6185-2:2001 Inflatable boats — Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive▷ISO 6185-3:2014 Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater▷ISO 6185-4:2011 Inflatable boats — Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater▷ISO 7840:2021 Small craft — Fire-resistant fuel hoses▷ISO 8099-1:2018 Small craft — Waste systems — Part 1: Waste water retention▷ISO 8099-2:2020 Small craft — Waste systems — Part 2: Sewage treatment systems▷ISO 8469:2021 Small craft — Non-fire-resistant fuel hoses▷ISO 8665:2006 Small craft — Marine propulsion reciprocating internal combustion engines — Power measurements and declarations▷ISO 8666:2020 Small craft — Principal data▷ISO 8845:1994 Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper▷ISO 8845:1994/Cor 1:1995 Small craft with inboard engine — Propeller shaft ends and bosses with 1:16 taper — Technical Corrigendum 1▷ISO 8846:1990 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases□ ISO/TC 188 사무국의 직접적인 책임 하에 개발 중인 표준 12개 목록▷ISO/FDIS 6185-3 Inflatable boats — Part 3: Boats with a length of the hull less than 8 m with a motor power rating of 15 kW and greater▷ISO/FDIS 8665-2 Small craft — Power measurements and declarations — Part 2: Electric marine propulsion▷ISO/DIS 8846 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases▷ISO/DIS 10239.2 Small craft — Liquefied petroleum gas (LPG) systems▷ISO 11812:2020/DAmd 1 Small craft — Watertight or quick-draining recesses and cockpits — Amendment 1▷ISO/CD 12215-9 Small craft — Hull construction and scantlings — Part 9: Sailing craft appendages▷ISO/AWI 12217-1 Small craft — Stability and buoyancy assessment and categorization — Part 1: Non-sailing boats of hull length greater than or equal to 6 m▷ISO/AWI 12217-2 Small craft — Stability and buoyancy assessment and categorization — Part 2: Sailing boats of hull length greater than or equal to 6 m▷ISO/AWI 12217-3 Small craft — Stability and buoyancy assessment and categorization — Part 3: Boats of hull length less than 6 m▷ISO/FDIS 15085 Small craft — Protection from falling overboard and means of reboarding▷ISO/DIS 16315 Small craft — Electrical systems used for electrical propulsion▷ISO/CD 23625 Small craft — Lithium-ion batteries□ ISO/TC 188 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 188/SC 1 Personal safety equipment ; 발행된 표준 14개, 개발 중인 표준 4개
-
[특집-기술위원회] TC 186 - 수저와 테이블, 장식용 금속 냄비(Cutlery and table and decorative metal hollow-ware)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 등이 있다.ISO/TC 186 수저와 테이블, 장식용 금속 냄비(Cutlery and table and decorative metal hollow-ware)와 관련된 기술위원회는 TC 183, TC 184, TC 185와 마찬가지로 1983년 결성됐다. 사무국은 중국 국가표준화관리위원회(国家标准化管理委员会, Standardization Administration of the P. R. C, SAC)에서 맡고 있다.위원회는 민 두안(Mrs Min Duan)이 책임지고 있다. 현재 의장은 화신 펑( Mr Huaxin Peng)이며 임기는 2025년까지다. ISO 기술 프로그램 관리자는 페트리샤 쿡(Mme Patricia Cook) ISO 편집 관리자는 바주치(M Vincenzo Bazzucchi)등으로 조사됐다.범위는 수저류, 접시류, 테이블, 장식용 금속 할로우 웨어 분야의 표준화다. 참고로 할로우 웨어(hollow-ware)는 움푹한 냄비나 쟁반 같은 그릇을 말한다.현재 ISO/TC 186의 직접적인 책임 하에 발행된 표준은 10개며 참여하고 있는 회원은 11개국, 참관 회원은 17개국이다.□ ISO/TC 186 사무국의 직접적인 책임 하에 발행된 표준 10개 목록▷ISO 4481:1977 Cutlery and flatware — Nomenclature▷ISO 8442-1:1997 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 1: Requirements for cutlery for the preparation of food▷ISO 8442-2:1997 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 2: Requirements for stainless steel and silver-plated cutlery▷ISO 8442-3:1997 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 3: Requirements for silver-plated table and decorative holloware▷ISO 8442-4:1997 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 4: Requirements for gold plated cutlery▷ISO 8442-5:2004 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 5: Specification for sharpness and edge retention test of cutlery▷ISO 8442-6:2000 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 6: Lightly silver-plated table holloware protected by lacquer▷ISO 8442-7:2000 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys▷ISO 8442-8:2000 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 8: Requirements for silver table and decorative holloware▷ISO 8442-9:2018 Materials and articles in contact with foodstuffs — Cutlery and table holloware — Part 9: Requirements for ceramic knives
-
[특집-기술위원회] TC 185 - 과도한 압력으로부터 보호하기 위한 안전장치(Safety devices for protection against excessive pressure)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 등이 있다.ISO/TC 185 과도한 압력으로부터 보호하기 위한 안전 장치(Safety devices for protection against excessive pressure)와 관련된 기술위원회는 TC 183, TC 184와 마찬가지로 1983년 결성됐다. 사무국은 미국 표준협회(American National Standards Institute, ANSI)에서 맡고 있다.위원회는 콜린 로드리게스(Ms Colleen Rodrigues)가 책임지고 있으며 현재 의장은 위르겐 슈미트(Mr Prof. Dr.-Ing Jürgen Schmidt)이며 임기는 2024년까지다.ISO 기술 프로그램 관리자는 샐리 스윙우드(Ms Sally Swingewood), ISO 편집 관리자는 루시 커크(Ms Lucy Kirk) 등으로 조사됐다.범위는 과도한 내부 및 외부 압력으로부터 보호하기 위한 안전 장치 분야의 표준화다. 단 ISO/TC 138의 책임 하에 있는 주로 플라스틱으로 만들어진 밸브, ISO/TC 131의 책임 하에 있는 주로 유체 동력 시스템에 사용하도록 고안된 구성 요소들은 제외한다.현재 ISO/TC 185의 직접적인 책임 하에 발행된 표준은 12개며 ISO/TC 185의 직접적인 책임 하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 13개국, 참관 회원은 22개국이다.□ ISO/TC 185 사무국의 직접적인 책임 하에 발행된 표준 12개 목록▷ISO 4126-1:2013 Safety devices for protection against excessive pressure — Part 1: Safety valves▷ISO 4126-1:2013/Amd 1:2016 Safety devices for protection against excessive pressure — Part 1: Safety valves — Amendment 1▷ISO 4126-2:2018 Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices▷ISO 4126-3:2020 Safety devices for protection against excessive pressure — Part 3: Safety valves and bursting disc safety devices in combination▷ISO 4126-4:2013 Safety devices for protection against excessive pressure — Part 4: Pilot operated safety valves▷ISO 4126-5:2013 Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS)▷ISO 4126-5:2013/Amd 1:2016 Safety devices for protection against excessive pressure — Part 5: Controlled safety pressure relief systems (CSPRS) — Amendment 1▷ISO 4126-6:2014 Safety devices for protection against excessive pressure — Part 6: Application, selection and installation of bursting disc safety devices▷ISO 4126-7:2013 Safety devices for protection against excessive pressure — Part 7: Common data▷ISO 4126-7:2013/Amd 1:2016 Safety devices for protection against excessive pressure — Part 7: Common data — Amendment 1▷ISO 4126-9:2008 Safety devices for protection against excessive pressure — Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices▷ISO 4126-10:2010 Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves for gas/liquid two-phase flow□ ISO/TC 185 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록▷ISO 4126-10 Safety devices for protection against excessive pressure — Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow▷ISO/AWI 4126-11 Safety devices for protection against excessive pressure — Part 11: Performance Testing
-
산업부, 국제표준화기구 전문가 간담회 개최산업통상자원부가 국제표준화기구 전문가들과 함께 국내 기술의 국제표준화 확대 방안을 모색했다. 산업부는 7일 서울 롯데호텔에서 ‘국제표준화기구 전문가 간담회’를 개최해 우리 기술의 국제표준화 확대 방안을 모색하고, 우리나라를 대표해 국제표준화기구에서 활동 중인 표준전문가들을 격려했다고 밝혔다. 이번 간담회에는 올해 임기를 시작한 조성환 국제표준화기구(ISO) 회장을 비롯해 ISO, 국제전기기술위원회(IEC) 등에서 국제표준 정책 및 전략을 결정하는 이사, 국제표준 제정을 주도하는 의장·간사 등 표준 리더들이 한자리에 모여 우리나라 국제표준 정책 방향에 대해 논의했다. 표준전문가들은 양자기술, 인공지능(AI) 등 첨단기술분야에서 국제표준은 제품의 시장진출과 경쟁력 확보 기능을 넘어 첨단기술을 지배하고 경쟁국의 추격을 배제하는 수단으로 사용되기 때문에 국가 간 심화되는 국제표준 선점 경쟁에서 우위를 확보해야 한다고 입을 모았다. 이를 위한 방안으로 연구개발(R&D)-표준 연계 등을 통한 국제표준안 개발 확대, 국제표준화 추진을 위한 차세대 전문가 육성, 주요 표준강국 등과 표준파트너십 강화 등 다양한 의견들이 제시됐다. 간담회를 주재한 안덕근 장관은 “우리기술의 국제표준화를 확대하고 국제표준화기구에서 리더십을 강화하기 위해 올해 상반기 내 ‘첨단산업 국가표준화 전략’을 수립·추진하겠다”며 “표준경쟁의 선두에서 우리나라를 위해 노력하고 있는 표준전문가의 활동에 감사하고 앞으로도 국제표준을 통해 우리나라가 글로벌 시장의 룰메이커로 도약하고 우리 첨단기술이 세계에 진출하는 데 큰 역할을 해주길 바란다”고 당부했다.
-
[특집-기술위원회] TC 184 - 자동화 시스템 및 통합(Automation systems and integration)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 등이 있다.ISO/TC 184 자동화 시스템 및 통합(Automation systems and integration)과 관련된 기술위원회는 TC 183과 마찬가지로 1983년 결성됐다. 사무국은 프랑스 표준화기구(Association Française de Normalization, AFNOR)에서 맡고 있다.위원회는 이사벨 페레이라(Mme Isabelle Pereira)가 책임지고 있으며 현재 의장은 패트릭 램볼리(M Patrick Lamboley)이다. ISO 기술 프로그램 관리자는 로라 매튜(Ms Laura Mathew), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등으로 조사됐다.범위는 자동화 시스템 분야의 표준화 및 제품의 설계, 소싱, 제조, 생산 및 배송, 지원, 유지 관리 및 폐기에 대한 통합과 관련된 표준화 뿐 아니라 관련 서비스 분야의 표준화도 포함된다. 표준화 영역에는 정보 시스템, 자동화 및 제어 시스템, 통합 기술이 포함된다.참고로 기계, 제조 자원 및 시설, 로봇 공학, 전기 및 전자 장비, 일반 응용용 PLC, 품질 관리, 산업 안전, 정보 기술, 멀티미디어 기능, 및 다중 모드 통신 네트워크와 관련해 해당 분야 담당 기술위원회와 적극적으로 협력할 예정이다.현재 ISO/TC 184 사무국과 관련해 발행된 표준은 896개며 ISO/TC 184의 직접적인 책임 하에 발행된 표준은 4개다. ISO/TC 184 사무국과 관련해 개발 중인 표준은 68개며 ISO/TC 184의 직접적인 책임 하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 24개국, 참관 회원은 21개국이다.□ ISO/TC 184 사무국의 직접적인 책임 하에 발행된 표준 4개 목록▷ISO/TS 18101-1:2019 Automation systems and integration — Oil and gas interoperability — Part 1: Overview and fundamental principles▷ISO/TR 23087:2018 Automation systems and integration — The Big Picture of standards▷ISO/IEC TR 63306-1:2020 Smart manufacturing standards map (SM2) — Part 1: Framework▷ISO/IEC TR 63306-2:2021 Smart manufacturing standards map (SM2) — Part 2: Catalogue□ ISO/TC 184 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록▷IEC/CD TR 63319 A meta-modelling analysis approach to smart manufacturing reference models▷IEC/FDIS 63339 Unified reference model for smart manufacturing□ ISO/TC 184 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 184/SC 1 Industrial cyber and physical device control ; 발행된 표준 28개, 개발 중인 표준 1개▷ISO/TC 184/SC 4 Industrial data ; 발행된 표준 799개, 개발 중인 표준 43개▷ISO/TC 184/SC 5 Interoperability, integration, and architectures for enterprise systems and automation applications ; 발행된 표준 65개, 개발 중인 표준 22개
-
[특집-기술위원회] TC 183 - 구리, 납, 아연, 니켈 광석 및 정광(Copper, lead, zinc and nickel ores and concentrates)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 등이 있다.ISO/TC 183 구리, 납, 아연, 니켈 광석 및 정광(Copper, lead, zinc and nickel ores and concentrates)과 관련된 기술위원회는 1983년 결성됐다. 사무국은 오스트레일리아 표준협회(Standards Australia, SA)에서 맡고 있다.위원회는 재스민 브린스미드(Ms Jasmine Brinsmead)가 책임지고 있으며 현재 의장은 마크 오드와이어(Mr Mark O'Dwyer)이며 임기는 2026년까지다. ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 샘플링, 화학적 분석 및 물리적 테스트를 포함해 구리, 납, 아연, 니켈 광석 및 정광(농축물), 제련소 잔류물 분야의 표준화다.현재 ISO/TC 183 사무국의 직접적인 책임 하에 발행된 표준은 28개며 ISO/TC 183 사무국의 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 8개국, 참관 회원은 26개국이다.□ ISO/TC 183 사무국의 직접적인 책임 하에 발행된 표준 28개 중 15개 목록▷ISO 3483:2023 Copper and zinc sulfide concentrates — Determination of thallium — Acid digestion and inductively coupled plasma-mass spectrometry▷ISO 9599:2015 Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method▷ISO 10251:2006 Copper, lead, zinc and nickel concentrates — Determination of mass loss of bulk material on drying▷ISO 10258:2018 Copper sulfide concentrates — Determination of copper content — Titrimetric methods▷ISO 10378:2016 Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method▷ISO 10469:2006 Copper sulfide concentrates — Determination of copper — Electrogravimetric method▷ISO 11441:1995 Lead sulfide concentrates — Determination of lead content — Back titration of EDTA after precipitation of lead sulfate▷ISO 11790:2017 Copper, lead, zinc and nickel concentrates — Guidelines for the inspection of mechanical sampling systems▷ISO 11794:2017 Copper, lead, zinc and nickel concentrates — Sampling of slurries▷ISO 12739:2006 Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method▷ISO 12740:1998 Lead sulfide concentrates — Determination of silver and gold contents — Fire assay and flame atomic absorption spectrometric method using scorification or cupellation▷ISO 12742:2020 Copper, lead and zinc sulfide concentrates — Determination of transportable moisture limits — Flow-table method▷ISO 12743:2021 Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content▷ISO 12744:2006 Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling▷ISO 12745:2008 Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques□ ISO/TC 183 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/CD 11456 Copper and zinc sulfide concentrates — Determination of silver content — Acid digestion and flame atomic absorption or inductively coupled plasma emission spectrometric method▷ISO/AWI 12739 Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method▷ISO/CD 12744 Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling▷ISO/CD 13548 Copper, lead and zinc sulfide concentrates — Determination of fluorine content by sodium hydroxide fusion and fluoride ion selective electrode detection
-
[특집-기술위원회] TC 182 - 지반공학(Geotechnics)… 토양 및 암석의 특성을 포함해 건축 및 토목 공학 분야의 지반 공학적 측면의 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 등이 있다.ISO/TC 182 지반공학(Geotechnics)과 관련된 기술위원회는 1981년 결성됐다. 사무국은 영국 표준협회(British Standards Institution, BSI)에서 맡고 있다.위원회는 디드레 푸리(Miss Deidre Fourie)가 책임지고 있으며 현재 의장은 존 파웰(Mr John Powell)이다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 토양 및 암석의 (관련) 특성을 포함해 건축 및 토목 공학 분야의 지반 공학적 측면의 표준화다.현재 ISO/TC 182 사무국의 직접적인 책임 하에 발행된 표준은 58개며 ISO/TC 182 사무국의 직접적인 책임 하에 개발 중인 표준은 6개다. 참여하고 있는 회원은 25개국, 참관 회원은 31개국이다.□ ISO/TC 182 사무국의 직접적인 책임 하에 발행된 표준 58개 중 15개 목록▷ISO 14688-1:2017 Geotechnical investigation and testing — Identification and classification of soil — Part 1: Identification and description▷ISO 14688-2:2017 Geotechnical investigation and testing — Identification and classification of soil — Part 2: Principles for a classification▷ISO 14689:2017 Geotechnical investigation and testing — Identification, description and classification of rock▷ISO 17628:2015 Geotechnical investigation and testing — Geothermal testing — Determination of thermal conductivity of soil and rock using a borehole heat exchanger▷ISO 17892-1:2014 Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content▷ISO 17892-1:2014/Amd 1:2022 Geotechnical investigation and testing — Laboratory testing of soil — Part 1: Determination of water content — Amendment 1▷ISO 17892-2:2014 Geotechnical investigation and testing — Laboratory testing of soil — Part 2: Determination of bulk density▷ISO 17892-3:2015 Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination of particle density▷ISO 17892-4:2016 Geotechnical investigation and testing — Laboratory testing of soil — Part 4: Determination of particle size distribution▷ISO 17892-5:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental loading oedometer test▷ISO 17892-6:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 6: Fall cone test▷ISO 17892-7:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined compression test▷ISO 17892-8:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 8: Unconsolidated undrained triaxial test▷ISO 17892-9:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 9: Consolidated triaxial compression tests on water saturated soils▷ISO 17892-10:2018 Geotechnical investigation and testing — Laboratory testing of soil — Part 10: Direct shear tests□ ISO/TC 182 사무국의 직접적인 책임 하에 개발 중인 표준 6개 목록▷ISO/AWI 16383-1 Geotechnical investigation and testing — Laboratory testing of rock — Part 1: Determination of water content▷ISO/AWI 16383-2 Geotechnical investigation and testing — Laboratory testing of rock — Part 2: Determination of bulk density▷ISO/DIS 18674-7 Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 7: Measurement of strains: Strain gauges▷ISO/AWI 18674-9 Geotechnical investigation and testing -Geotechnical monitoring by field instrumentation — Part 9: Measurement of displacements by geodetic means▷ISO 22476-16 Geotechnical investigation and testing — Field testing — Part 16: Borehole shear test▷ISO/WD 22477-6 Geotechnical investigation and testing — Testing of geotechnical structures — Part 6: Load testing of soil nails and rock bolts
-
[특집-기술위원회] TC 181 - 장난감 안전(Safety of toys)… 기계적, 물리적, 화학적 및 가연성 특성과 관련된 안전성 측면에서 장난감의 표준화스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 등이 있다.ISO/TC 181 장난감의 안전(Safety of toys)과 관련된 기술위원회는 TC 180과 마찬가지로 1980년 결성됐다. 사무국은 덴마크 표준재단(Danish Standards Foundation, DS)에서 맡고 있다.위원회는 피터 담가드(Mr Peter Damgaard)가 책임지고 있으며 현재 의장은 피터 트릴링스가드(Mr Peter Trillingsgaard)이며 임기는 2024년까지다. ISO 기술 프로그램 관리자는 패트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 앨리슨 레이드 자몬드(Ms Alison Reid-Jamond) 등으로 조사됐다.범위는 기계적, 물리적, 화학적 및 가연성 특성과 관련된 안전성 측면에서 장난감의 표준화다. 단, IEC에서 다루는 모든 전기적 측면은 제외한다.현재 ISO/TC 181 사무국의 직접적인 책임 하에 발행된 표준은 16개며 ISO/TC 181 사무국의 직접적인 책임 하에 개발 중인 표준은 5개다. 참여하고 있는 회원은 27개국, 참관 회원은 37개국이다.□ ISO/TC 181 사무국의 직접적인 책임 하에 발행된 표준 16개 목록▷ISO 8124-1:2022 Safety of toys — Part 1: Safety aspects related to mechanical and physical properties▷ISO 8124-2:2023 Safety of toys — Part 2: Flammability▷ISO 8124-3:2020 Safety of toys — Part 3: Migration of certain elements▷ISO 8124-3:2020/Amd 1:2023 Safety of toys — Part 3: Migration of certain elements — Amendment 1: Limits for boron and other elements in slime, and barium in modelling clay▷ISO 8124-4:2014 Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use▷ISO 8124-4:2014/Amd 1:2017 Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 1▷ISO 8124-4:2014/Amd 2:2019 Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 2▷ISO 8124-5:2015 Safety of toys — Part 5: Determination of total concentration of certain elements in toys▷ISO 8124-6:2023 Safety of toys — Part 6: Certain phthalate esters▷ISO 8124-7:2015 Safety of toys — Part 7: Requirements and test methods for finger paints▷ISO 8124-7:2015/Amd 1:2020 Safety of toys — Part 7: Requirements and test methods for finger paints — Amendment 1▷ISO/TR 8124-8:2016 Safety of toys — Part 8: Age determination guidelines▷ISO/TR 8124-9:2020 Safety of toys — Part 9: Safety aspects related to mechanical and physical properties — Comparison of ISO 8124-1, EN 71-1 and ASTM F963▷ISO 8124-10:2023 Safety of toys — Part 10: Experimental sets for chemistry and related activities▷ISO 8124-11:2019 Safety of toys — Part 11: Chemical toys (sets) other than experimental sets▷ISO 8124-12:2023 Safety of toys — Part 12: Microbiological safety□ ISO/TC 181 사무국의 직접적인 책임 하에 개발 중인 표준 5개 목록▷ISO 8124-1:2022/CD Amd 1 Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 1▷ISO/DIS 8124-4 Safety of toys — Part 4: Activity toys for domestic use▷ISO/AWI 8124-5 Safety of toys — Part 5: Determination of total concentration of certain elements in toys▷ISO/CD TR 8124-8 Safety of toys — Part 8: Age determination guidelines: first age grade for the appropriate play of toys▷ISO/CD TR 8124-9 Safety of toys — Part 9: Safety aspects related to mechanical and physical properties — Comparison of ISO 8124-1, EN 71-1 and ASTM F963