검색결과
-
[미국] 스트린트스펙트럼과 프리즘테크놀로지의 특허 무효 시 손해 배상2016년 스위스 다보스포럼에서 클라우스 슈밥이 '제4차 산업혁명'이라는 용어를 처음 사용한 이후 4년이 흘렀다. 이러한 4차 산업혁명의 시대는 초기술 융합의 시대라고 부른다.예를 들어 4차산업의 대표적인 분야인 드론의 경우에 첨단소재, 배터리, 카메라, 운영체제(OS) 등 첨단기술 집약체이다. 특히 인공지능(AI), 로봇, 자율주행 자동차, 빅데이터, 블록체인과 융·복합적으로 관련돼 있다.이와 같은 초기술 융합의 시대에서는 특허권의 확보를 통한 특허경영이 기업의 미래뿐만 아니라 국가의 미래를 결정할 수도 있다. 또한 유효한 특허권을 적절히 확보해 외부의 공격으로부터 방어하는 것 역시 더욱 더 중요해지고 있다.아래에 제시된 판례는 스프린트스펙트럼(Sprint Spectrum)과 프리즘테크놀로지(Prism Technology) 간의 특허권의 무효에 따른 영향을 보여준다.국문요약: 스프린트스펙트럼이 프리즘테크놀로지에 대한 $US 3200만불의 손해 배상 책임 판결을 받았다. 하지만 아직 집행되지 않은 상태에서, 이후에 T-모바일이 프리즘테크놀로지의 특허를 무효화시켰다.이에 따라 스프린트스펙트럼은 이전 판결에 대한 구제를 요청해 지방법원은 스프린트스펙트럼의 요청을 받아들였다. 프리즘테크놀로지는 이에 대해 항소했으며 연방순회항소법원은 지방법원의 판결이 적절했다고 판결했다. 영문요약: Effect on Damages when Patent Is Invalidated Prism Tech. v. Sprint Spectrum L.P. (F.C. 2019)Case History:•Sprint was liable for $32M damage, which was affirmed in March 2017 by FC.•Prism had another litigation with T-Mobile.•T-Mobile challenged the eligibility of the patents under S101 and won.•On June 2017, FC affirmed the invalidation of the Prism’s patent at issue. FC Decision:•FC ruled in favor of Sprint.•After the invalidation of the patent, Sprint filed a motion for Relief from Judgment based on FC’s decision on invalidation.•District court agreed and FC found no abuse of discretion.Key Point:•Sprint was able to avoid paying $32M in damages due to T-Mobile’s effort to invalidate Prism’s patent.•Sprint took as much time as possible to stick around and see how the case between Prism and T-Mobile would turn out, and that turned out beneficial to Sprint.•There was a strong federal patent policy against enforcing an unexecuted judgment of the patent liability when the patent claims underlying that judgment had been held invalid by another decision.
-
[특집-기술위원회] TC 134 - 비료, 토양 개량제 및 유익한 물질(Fertilizers, soil conditioners and beneficial substances)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127 등도 포함된다.ISO/TC 134 비료, 토양 개량제 및 유익한 물질(Fertilizers, soil conditioners and beneficial substances)과 관련된 기술위원회는 TC 130, TC 131, TC 132, TC 133과 마찬가지로 1969년 결성됐다. 사무국은 이란 국가표준기구(Iran National Standards Organization, INSO)에서 맡고 있다.위원회는 하미데 닉빈(Mrs Hamideh Nikbin)가 책임지고 있다. 현재 의장은 크리슈나벨리 강 리우(Mr gang liu)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 마호 다카하시(Mme Maho Takahashi), ISO 편집 관리자는 발레리아 아가멤논(Agamennone) 등으로 조사됐다.범위는 비료, 토양 개량제, 유익한 물질 분야의 표준화다. 재배 식물의 영양을 보장하거나 개선하기 위해 첨가되는 물질 및(또는) 토양의 특성을 개선하고 토양의 효율적인 사용을 위해 첨가되는 물질 분야의 표준화도 포함된다.현재 ISO/TC 134 사무국의 직접적인 책임 하에 발행된 표준은 60개며 ISO/TC 133 사무국의 직접적인 책임하 에 개발 중인 표준은 4개다. 참여하고 있는 회원은 31개국, 참관 회원은 32개국이다.□ ISO/TC 134 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 60개 중 15개 목록▷ISO 3944:1992 Fertilizers — Determination of bulk density (loose)▷ISO 3963:1977 Fertilizers — Sampling from a conveyor by stopping the belt▷ISO 5306:1983 Fertilizers — Presentation of sampling reports▷ISO/TR 5307:1991 Solid fertilizers — Derivation of a sampling plan for the evaluation of a large delivery▷ISO 5311:1992 Fertilizers — Determination of bulk density (tapped)▷ISO 5313:1986 High nitrogen content, straight ammonium nitrate fertilizers — Determination or oil retention▷ISO 5314:1981 Fertilizers — Determination of ammoniacal nitrogen content — Titrimetric method after distillation▷ISO 5315:1984 Fertilizers — Determination of total nitrogen content — Titrimetric method after distillation▷ISO 5317:1983 Fertilizers — Determination of water-soluble potassium content — Preparation of the test solution▷ISO 6181:2023 Fertilizers and soil conditioners — Liquid methylene-urea slow release fertilizers — General requirements▷ISO 6598:1985 Fertilizers — Determination of phosphorus content — Quinoline phosphomolybdate gravimetric method▷ISO 6650:2023 Fertilizers, soil conditioners and beneficial substances — Simultaneous determination of N-(n-Butyl) thiophosphoric triamide and dicyandiamide by high-performance liquid chromatography▷ISO 7407:1983 Fertilizers — Determination of acid-soluble potassium content — Preparation of the test solution▷ISO 7408:1983 Fertilizers — Determination of ammoniacal nitrogen content in the presence of other substances which release ammonia when treated with sodium hydroxide — Titrimetric method▷ISO 7409:2018 Fertilizers — Marking — Presentation and declarations□ ISO/TC 133 사무국 분과위원회(Subcommittee)의 책임 하에 개발 중인 표준 4개 목록▷ISO/AWI 5314 Fertilizers — Determination of ammoniacal nitrogen content — Titrimetric method after distillation▷ISO/CD 6674 Fertilizers, soil conditioners and beneficial substances — Microbiology- Detection of Staphylococcus aureus coagulase-positive▷ISO/CD 6675 Fertilizers, soil conditioners and beneficial substances — Microbiology — Detection of Escherichia coli▷ISO 19822:2018/CD Amd 1 Fertilizers and soil conditioners — Determination of humic and hydrophobic fulvic acids concentrations in fertilizer materials — Amendment 1
-
[기획-디지털 ID 기술] ㊵ 포드글로벌테크놀로지, '적어도 하나의 운송 차량을 고객에게 동적으로 연결하기 위한 시스템 및 방법' 명칭의 미국 특허 등록 (US 11783441)미국 글로벌 자동차 제조업체 포드 자동차의 자회사 포드글로벌테크놀로지(Ford Global Technologies)에 따르면 2023년 10월10일 '적어도 하나의 운송 차량을 고객에게 동적으로 연결하기 위한 시스템 및 방법(Systems and methods for dynamically connecting one or more transportation vehicles to customers)' 명칭의 미국 특허(US 11783441)가 등록됐다.본 등록 특허는 2019년 9월24일 출원된(US 16/581073) 후 미국 특허청에 의해 심사를 받았다. 패밀리 특허로 중국 특허(CN 112637257), 독일 특허(DE 10-2020-124984)가 심사 중이다.본 등록 특허는 운송 차량을 고객에게 연결하기 위한 시스템과 방법에 관한 특허이다. 본 등록 특허의 일 실시예에 따르면 특정 위치에서 사용자의 디지털 식별자를 수신한다.디지털 식별자는 적어도 하나의 비디오 캡쳐 장치에 의해 획득될 수 있다. 비디오 캡쳐 장치는 적어도 하나의 승용 차량 및 사용자의 환경에 위치하거나, 적어도 하나의 승용 차량 자체에 위치할 수 있다.사용자가 특정 위치에 있음을 나타내는 디지털 식별자에 기초하여 사용자에게 할당할 승합차가 결정된다. 특허의 존속기간(예상)만료일은 2041년 4월22일이다.
-
신기술·신제품 인증기업, 평균 매출 및 신규고용 증가했다‘신기술(NET)·신제품(NEP)인증 최고경영자 포럼’에서 신기술(NET)·신제품(NEP) 인증기업과 인증신청 희망기업들이 함께 인증성과를 공유하고 제도 개선을 모색했다. 산업통상자원부 국가기술표준원은 “신기술(NET)·신제품(NEP) 인증기업들이 인증 전(前) 대비 평균 매출 122~163%, 신규고용 5.1~11명 증가한 것으로 조사됐다”고 3일 더케이호텔에서 개최된 ‘신기술(NET)·신제품(NEP)인증 최고경영자 포럼’에서 밝혔다. 신기술(NET)은 New Excellent Technology, 신제품(NEP)은 New Excellent Product를 의미한다. 아울러 신제품(NEP) 인증제품 매출액 중 공공기관 의무구매 비중이 평균 43.3% 차지했다. 특히 정보통신 분야는 97.4%를 차지함에 따라 다른 분야에 비해 신제품(NEP) 인증기업의 매출액 증가에 공공기관 의무구매제도가 상당한 기여를 한 것으로 조사됐다. 분야별 매출액 중 의무구매 비중은 정보통신이 97.4%, 전기전자가 63.8%, 건설・환경이 44.7% 등을 기록했다. 한편 포럼에 참석한 기업들은 ▲현(現) 20% 이내인 공공기관 의무구매비율 확대 ▲정부 연구개발(R&D)사업 평가 시 인증기업에 가점 부여 ▲금융 투자 지원 신설 등 지원제도 강화 ▲과도한 인증유효기간으로 인해 인증 신기술․제품의 공공기관 의무구매제도가 사실상 시장자율경쟁을 저해하고 있어 제도 개선 등을 요청했다. 이에 인증제도 운영기관, 공공구매 조달기관, 창업투자회사, 인증평가기관 및 관련협회 등 관계자들이 참여한 패널토론에서 동 건의사항에 대한 다양한 찬반 토론을 통해 “적극적인 지원과 개선방안 마련이 필요하다”는 의견을 같이 했다. 국가기술표준원 관계자는 “이번 포럼이 신기술(NET)·신제품(NEP) 인증기업과 인증신청 희망기업들이 함께 인증성과를 공유하고 제도 개선을 모색하는 소통의 시발점이 되기를 희망한다”며 “앞으로 다양한 현장의견을 수렴하여 개선방안을 마련하겠다”고 밝혔다.
-
국표원, ‘양자기술 표준화 포럼’ 출범식 개최국가전략기술인 양자기술의 산업화에 대비해 국내표준화 기반을 구축하고 국제표준화 주도를 위한 민·관 협력의 표준화 포럼이 출범했다. 이는 우리나라의 국제표준화 전략을 마련하는 첫걸음이 될 것으로 기대된다. 산업통상자원부 국가기술표준원은 2일 더케이호텔에서 ‘양자기술 표준화 포럼’을 발족하고 국내외에서 추진할 표준화 전략을 논의했다고 밝혔다. 양자기술(Quantum Technology)은 초고속 대용량 연산, 초신뢰 암호통신, 초정밀 계측 등을 가능하게 하는 첨단기술로 인공지능, 신약·신물질 개발, 광물 탐사, 금융·보험, 물류·운송, 자동차·항공·조선 등 다양한 분야에서 혁신과 변화를 주도할 것으로 기대된다. 최근 국제표준화기구(IEC, ISO)에서도 빠르게 발전되는 양자기술 개발 추세에 대응하기 위해 미국, 영국, 중국 등 선도국 중심으로 양자기술 표준화 위원회를 신설하는 논의가 진행 중이다. 우리나라는 그간 국제전기기술위원회(IEC)에서 2021년에 양자기술 백서 발간, 2022년부터 양자기술 표준화 평가그룹(SEG14) 설립 및 표준화 로드맵 개발 등 국제표준화 위원회 설립 활동에 주도적으로 참여하고 있다. 양자기술 표준화 포럼은 컴퓨팅, 통신, 센싱, 소재의 4개 분과로 구성된다. 포럼 운영위원장은 한림대학교 박성수 교수가 선임되었고, 운영사무국은 한국전자기술연구원과 한국기계연구원이 공동으로 지정됐다. 이번 포럼 출범식에서는 산·학·연 표준전문가가 양자기술 국제표준화 로드맵 개발 동향을 공유하였고 신설 국제표준화 위원회에서의 리더십 확보 등 향후 활동 방안을 논의했다. 오광해 국표원 표준정책국장은 “양자기술의 국제표준화에 대한 세계 각국의 관심이 고조되는 상황에서 이번 포럼 출범은 우리나라의 국제표준화 전략을 마련하는 첫걸음이 될 것”이라며 “민·관 협력을 통해 우리 기술이 국제표준화 될 수 있도록 적극 지원해 나가겠다”고 밝혔다.
-
양자기술 표준화 포럼, 국제표준화 전략의 첫걸음 모색하다양자기술의 국제표준화에 대한 세계 각국의 관심이 고조되면서, 국제표준화를 주도하기 위한 민관 협력의 표준화 포럼이 출범하였다. 국가전략기술 중 하나인 양자기술의 산업화에 대비해 국내표준화 기반을 만들면서 국제표준화 전략으로 나아가는 첫걸음이 될 것으로 보인다. 산업통상자원부 국가기술표준원(원장 진종욱, 이하 국표원)은 11월 2일(목) 더케이호텔에서「양자기술 표준화 포럼」을 발족하고 국내외에서 추진할 표준화 전략을 논의하였다. 양자기술(Quantum Technology)은 초고속 대용량 연산, 초신뢰 암호통신, 초정밀 계측 등을 가능하게 하는 첨단기술로 인공지능, 신약·신물질 개발, 광물 탐사, 금융·보험, 물류·운송, 자동차·항공·조선 등 다양한 분야에서 혁신과 변화를 주도할 것으로 기대된다. 최근, 국제표준화기구(IEC, ISO)에서도 빠르게 발전되는 양자기술 개발 추세에 대응하기 위해 미국, 영국, 중국 등 선도국 중심으로 양자기술 표준화 위원회를 신설하는 논의가 진행 중이다. 우리나라는 그간 국제전기기술위원회(IEC)에서 ‘21년에 양자기술 백서 발간, ‘22년부터 양자기술 표준화 평가그룹(SEG14) 설립 및 표준화 로드맵 개발 등 국제표준화 위원회 설립 활동에 주도적으로 참여하고 있다. 양자기술 표준화 포럼은 컴퓨팅, 통신, 센싱, 소재의 4개 분과로 구성된다. 포럼 운영위원장은 한림대학교 박성수 교수가 선임되었고, 운영사무국은 한국전자기술연구원과 한국기계연구원이 공동으로 지정되었다. 이번 포럼 출범식에서는 산·학·연 표준전문가가 양자기술 국제표준화 로드맵 개발 동향을 공유하였고, 신설 국제표준화 위원회에서의 리더십 확보 등 향후 활동 방안을 논의하였다.
-
[기획-디지털 ID 표준] ⑫산업단체와 포럼 - 신속 온라인 인증(Fast Identity Online, FIDO)디지털 ID(Digital Identity) 분야에서 상호운용(interoperable)이 가능하고 안전한 서비스 보장을 위한 표준에 대한 수요가 증가하고 있다. 다양한 표준 조직 및 산업 기관이 활동하는 이유다.디지털 ID 표준을 개발하는 곳은 유럽표준화기구(European Standardisation Organistions), 국제표준화기구(International Standardisation Organisations), 상업 포럼 및 컨소시엄, 국가기관 등 다양하다.산업단체와 포럼은 공식적으로 표준화 조직으로 간주되지 않지만 디지털 ID 영역을 포함한 특정 영역에서는 사실상의 표준을 제공하고 있다.몇몇의 경우 이들 단체들이 추가 비준을 위해 자신들이 생산한 사양을 ISO/IEC, ITU 통신 표준화 부문(ITU-T), ETSI 등 표준 기관에 제출할 수 있다.이러한 산업단체 및 포럼에는 △인증기관브라우저 포럼(Certification Authority Browser Forum, CA/Browser Forum) △클라우드 서명 컨소시엄(Cloud Signature Consortium, CSC) △국제자금세탁방지기구(Financial Action Task Force, FATF) △신속온라인인증(Fast Identity Online, FIDO) △국제인터넷표준화기구(Internet Engineering Task Force, IETF) △구조화 정보 표준 개발기구(오아시스)(Organization for the Advancement of Structured Information Standards, OASIS) △오픈ID(OpenID) △SOG-IS(Senior Officials Group-Information Systems Security) △W3C(World Wide Web Consortium) 등이다.신속 온라인 인증(Fast Identity Online, FIDO)은 2013년 2월 출범한 개방형 산업협회다. 전 세계 비밀번호에 대한 과도한 의존을 줄이는 데 도움이 되는 인증 표준을 개발하고 홍보하는 것을 사명으로 삼고 있다.디지털 ID와 관련된 내용은 로밍 인증자와 다른 클라이언트/플랫폼 간 통신을 위한 어플리케이션 계층 프로토콜을 설명하는 클라이언트-인증자 프로토콜(Client to Authenticator Protocol, CTAP)이다.다양한 물리적 매체를 사용해 이 어플리케이션 프로토콜을 다양한 전송 프로토콜에 결합하고 있다. 클라이언트-인증자 프로토콜(Client to Authenticator Protocol, CTAP) 관련 목차를 살펴보면 다음과 같다.목차(table of contents)1. Introduction1.1 Relationship to Other Specifications2. Conformance3. Protocol Structure4. Protocol Overview5. Authenticator API5.1 authenticatorMakeCredential (0x01)5.2 authenticatorGetAssertion (0x02)5.3 authenticatorGetNextAssertion (0x08)5.3.1 Client Logic5.4 authenticatorGetInfo (0x04)5.5 authenticatorClientPIN (0x06)5.5.1 Client PIN Support Requirements5.5.2 Authenticator Configuration Operations Upon Power Up5.5.3 Getting Retries from Authenticator5.5.4 Getting sharedSecret from Authenticator5.5.5 Setting a New PIN5.5.6 Changing existing PIN5.5.7 Getting pinToken from the Authenticator5.5.8 Using pinToken5.5.8.1 Using pinToken in authenticatorMakeCredential5.5.8.2 Using pinToken in authenticatorGetAssertion5.5.8.3 Without pinToken in authenticatorGetAssertion5.6 authenticatorReset (0x07)6. Message Encoding6.1 Commands6.2 Responses6.3 Status codes7. Interoperating with CTAP1/U2F authenticators7.1 Framing of U2F commands7.1.1 U2F Request Message Framing ### (#u2f-request-message-framing)7.1.2 U2F Response Message Framing ### (#u2f-response-message-framing)7.2 Using the CTAP2 authenticatorMakeCredential Command with CTAP1/U2F authenticators7.3 Using the CTAP2 authenticatorGetAssertion Command with CTAP1/U2F authenticators8. Transport-specific Bindings8.1 USB Human Interface Device (USB HID)8.1.1 Design rationale8.1.2 Protocol structure and data framing8.1.3 Concurrency and channels8.1.4 Message and packet structure8.1.5 Arbitration8.1.5.1 Transaction atomicity, idle and busy states.8.1.5.2 Transaction timeout8.1.5.3 Transaction abort and re-synchronization8.1.5.4 Packet sequencing8.1.6 Channel locking8.1.7 Protocol version and compatibility8.1.8 HID device implementation8.1.8.1 Interface and endpoint descriptors8.1.8.2 HID report descriptor and device discovery8.1.9 CTAPHID commands8.1.9.1 Mandatory commands8.1.9.1.1 CTAPHID_MSG (0x03)8.1.9.1.2 CTAPHID_CBOR (0x10)8.1.9.1.3 CTAPHID_INIT (0x06)8.1.9.1.4 CTAPHID_PING (0x01)8.1.9.1.5 CTAPHID_CANCEL (0x11)8.1.9.1.6 CTAPHID_ERROR (0x3F)8.1.9.1.7 CTAPHID_KEEPALIVE (0x3B)8.1.9.2 Optional commands8.1.9.2.1 CTAPHID_WINK (0x08)8.1.9.2.2 CTAPHID_LOCK (0x04)8.1.9.3 Vendor specific commands8.2 ISO7816, ISO14443 and Near Field Communication (NFC)8.2.1 Conformance8.2.2 Protocol8.2.3 Applet selection8.2.4 Framing8.2.4.1 Commands8.2.4.2 Response8.2.5 Fragmentation8.2.6 Commands8.2.6.1 NFCCTAP_MSG (0x10)8.2.6.2 NFCCTAP_GETRESPONSE (0x11)8.3 Bluetooth Smart / Bluetooth Low Energy Technology8.3.1 Conformance8.3.2 Pairing8.3.3 Link Security8.3.4 Framing8.3.4.1 Request from Client to Authenticator8.3.4.2 Response from Authenticator to Client8.3.4.3 Command, Status, and Error constants8.3.5 GATT Service Description8.3.5.1 FIDO Service8.3.5.2 Device Information Service8.3.5.3 Generic Access Profile Service8.3.6 Protocol Overview8.3.7 Authenticator Advertising Format8.3.8 Requests8.3.9 Responses8.3.10 Framing fragmentation8.3.11 Notifications8.3.12 Implementation Considerations8.3.12.1 Bluetooth pairing: Client considerations8.3.12.2 Bluetooth pairing: Authenticator considerations8.3.13 Handling command completion8.3.14 Data throughput8.3.15 Advertising8.3.16 Authenticator Address Type9. Defined Extensions9.1 HMAC Secret Extension (hmac-secret)10. IANA Considerations10.1 WebAuthn Extension Identifier Registrations11S ecurity ConsiderationsIndexTerms defined by this specificationTerms defined by referenceReferencesNormative ReferencesInformative ReferencesIDL Index
-
[특집-ISO/IEC JTC 1/SC 17 활동] ⑦ISO/TMB Communique_ Issue Nr. 75 (October 2023) 소개지난 10월3일 ISO/IEC 공동기술위원회 산하 분과위원회 SC 17은 'ISO/TMB Communique_ Issue Nr. 75 (October 2023)' 관련 문서 v.0.1을 배포했으며 10월 16일 v.0.2를 배포했다.ISO/IEC JTC 1/SC 17 카드 및 개인 식별을 위한 보안 장치(Cards and security devices for personal identification)는 국제표준화기구(ISO와 국제전기기술위원회(IEC)의 공동 기술 위원회(JTC) ISO/IEC JTC 1의 표준화 분과위원회다.ISO/IEC JTC 1/SC 17의 국제사무국은 영국에 위치한 영국표준협회(BSI)이며 신분증 및 개인 식별 분야 표준을 개발하고 촉진하는 역할을 담당하고 있다.배포된 문서는 'ISO/TMB Communique_ Issue Nr. 75 (October 2023)'은 기술관리위원회(Technical Management Board, TMB)의 동향보고서 v.0.2다. TMB 동향보고서는 목차는 다음과 같이 구성됐다.ContentsTMB COMMUNIQUEHighlights from the September 2023 TMB meeting 1. New ISO/IEC JTC 1/SC 44 on Information Technology for Smart Cities 2. New TC on Data-Driven Agrifood Systems integrating the TS/P on Integrated Pest Management (IPM) for Crops 3. New PC on Sustainable raw materials & new IWA on Sustainable critical mineral supply chains 4. Re-activation of ISO/PC 302 Guidelines for Auditing Management SystemsNews 5. Improved Development Processes – Optimized Deliverables 6. TMB London Declaration Action Plan 7. L.D. Eicher Award 2023 Winner 8. ISO Open Consultation 9. Committee Strategy Management – Update 10. E-learning module available for ISO Guide 84Reminders 11. Guidance on gender responsive standards (GRS)New CommitteesTMB Resolutions
-
효율성 높이는 연구개발(R&D) 투자 혁신방안 마련한다산업통상자원부(이하 산업부)가 연구개발(R&D) 투자 성과를 향상시키기 위한 혁신 방안을 마련하는데 주력을 다하고 있다. 장영진 1차관은 주요 기업 최고기술책임자(CTO, Chief Technology Officer)들을 모아 간담회를 개최했다. 이 곳에서 내년 R&D 예산 개혁안과 제도 혁신 방향에 대한 설명을 진행하고 기업 의견을 청취했다. 특히, 지난 20년간 정부의 R&D 투자가 세계 2위에 달하더라도 성과가 부족하다는 지적을 언급했다. 더불어 경제협력개발기구(OECD)의 ‘한국 혁신정책 검토’에서 혁신성 부족이 언급된 사실을 설명했다. 이러한 상황에서 장영진 1차관은 앞으로 연구개발(R&D) 투자를 재조정하겠다고 밝혔다. 구체적으로 “기업에 대한 소규모 뿌려주기식 투자와 개별 쟁점에 따른 분절적 사업 등을 축소하고, 생태계 융합을 촉진할 수 있는 임무 지향적 대형 프로그램이 필요하다.”고 언급했다. 산업부는 연구개발에 대한 혁신방안 마련을 통해 투자의 효율성을 적극 향상시킬 예정이다. 이를 통해 기업과 정부간 협력이 강화되고 R&D 분야에서 성과를 높이는 데 큰 기여를 할 것으로 보인다.
-
[특집-기술위원회] TC 130 - 그래픽 기술(Graphic technology)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127 등도 포함된다.ISO/TC 130 그래픽 기술(Graphic technology)과 관련된 기술위원회는 1969년 결성됐다. 사무국은 중국 국가표준화관리위원(国家标准化管理委员会, Standardization Administration of China, SAC)에서 맡고 있다.위원회는 메이팡 리(Ms Meifang Li)가 책임지고 있다. 현재 의장은 펑페이 짜오(Mr Pengfei Zhao)로 임기는 2023년까지다.ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등으로 조사됐다.범위는 인쇄 및 그래픽 기술 분야의 표준화를 다루고 있다. 이 분야는 그래픽 요소(이미지, 텍스트, 라인 아트, 패턴 등)가 생성, 조작, 조립, 전달되고 최종적으로 디지털 제품으로 전자적으로 전달되거나 잉크, 토너 및 기타를 사용해 물리적으로 기판에 전달되는 프로세스의 모든 단계를 다룬다. 마킹 또는 기능성 재료를 생산하고 최종 응용 분야의 요구에 따라 마감 처리된다.ISO/TC 130 표준에는 용어, 시각적 외관 및 제품 품질 평가, 데이터 교환, 프로세스 제어, 관리, 적합성 평가, 환경에 대한 영향 등이 포함되지만 이에 국한되지는 않는다. 뿐만 아니라 관련 재료, 장비 및 시스템에 대한 요구 사항 및 테스트도 수용한다.참고로 ISO/TC 42, TC 6, TC 256, TC 35, IEC/TC 100 및 ISO/IEC JTC 1/SC 28과 같은 다른 TC/SC와 범위가 실제 또는 잠재적으로 중복되는 경우 관련 TC와의 연락 또는 JWG를 통한 조정은 유지되거나 적극적으로 추진돼야 한다.현재 ISO/TC 130 사무국과 관련해 발행된 표준은 115개며 ISO/TC 130 사무국과 관련해 개발 중인 표준은 15개다. 참여하고 있는 회원은 21개국, 참관 회원은 22개국이다.□ ISO/TC 130 사무국 분과위원회(Subcommittee)의 책임 하에 발행된 표준 115개 중 15개 목록▷ISO 2834-1:2020 Graphic technology — Laboratory preparation of test prints — Part 1: Paste inks▷ISO 2834-2:2022 Graphic technology — Laboratory preparation of test prints — Part 2: Liquid printing inks▷ISO 2834-3:2008 Graphic technology — Laboratory preparation of test prints — Part 3: Screen printing inks▷ISO 2836:2021 Graphic technology — Prints and printing inks — Assessment of resistance of prints to various agents▷ISO 2846-1:2017 Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing▷ISO 2846-2:2007 Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 2: Coldset offset lithographic printing▷ISO 5776:2022 Graphic technology — Symbols for text proof correction▷ISO/TS 10128:2009 Graphic technology — Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data▷ISO 11084-1:1993 Graphic technology — Register systems for photographic materials, foils and paper — Part 1: Three-pin systems▷ISO 11084-2:2006 Graphic technology — Register systems for photographic materials, foils and paper — Part 2: Register pin systems for plate making▷ISO 12040:1997 Graphic technology — Prints and printing inks — Assessment of light fastness using filtered xenon arc light▷ISO 12218:1997 Graphic technology — Process control — Offset platemaking▷ISO 12632:2015 Graphic technology — Ink, paper and labels — Requirements on hot alkali penetration and resistance▷ISO 12634:2017 Graphic technology — Determination of tack of paste inks and vehicles by a rotary tackmeter▷ISO 12635:2021 Graphic technology — Plates for offset printing — Dimensions□ ISO/TC 130 사무국 분과위원회(Subcommittee)의 책임 하에 개발 중인 표준 15개 목록▷ISO/DTS 10128 Graphic technology — Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data▷ISO/DIS 12641-1 Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration — Part 1: Colour targets for input scanner calibration▷ISO/FDIS 12643-1.2 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements▷ISO/FDIS 12643-2.2 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems▷ISO/FDIS 12643-3 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems▷ISO/FDIS 12643-4 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 4: Converting equipment and systems▷ISO/FDIS 12643-5 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 5: Manually-fed stand-alone platen presses▷ISO/DIS 12647-2 Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 2: Offset lithographic processes▷ISO/AWI 15076-2 Image technology colour management — Architecture, profile format and data structure — Part 2: Based on ICC.1:2022▷ISO/DIS 15339-1 Graphic technology — Printing from digital data across multiple technologies — Part 1: Principles▷ISO/AWI TS 18621-22 Graphic technology — Image quality evaluation methods for printed matter — Part 22: Evaluation of colour graininess▷ISO/DTS 18621-31 Graphic technology — Image quality evaluation methods for printed matter — Part 31: Evaluation of the perceived resolution of printing systems with the Contrast–Resolution chart▷ISO/AWI 19307 Graphic Technology — Measurement and one-parameter representation of translucency▷ISO/CD TR 23805 Graphic technology — Dry back calculation for offset printing process▷ISO/FDIS 24487 Graphic technology — Processless lithographic plates — Evaluation methods for characteristics and performance□ ISO/TC 130 사무국의 작업그룹(Working Group, WG) 현황▷ISO/TC 130/JWG 7 Joint TC 130 - ICC WG: colour management▷ISO/TC 130/JWG 14 Joint TC 130 - TC 42 - ISO/IEC JTC 1/SC 28 WG: Print quality measurement methods▷ISO/TC 130/TF 3 Communications▷ISO/TC 130/WG 1 Terminology▷ISO/TC 130/WG 2 Prepress data exchange▷ISO/TC 130/WG 3 Process control and related metrology▷ISO/TC 130/WG 4 Media and materials▷ISO/TC 130/WG 5 Ergonomics - Safety▷ISO/TC 130/WG 10 Management of security printing processes▷ISO/TC 130/WG 11 Environmental impact of graphic technology▷ISO/TC 130/WG 12 Postpress